For the management of estuaries and the preservation of tidal flats it is crucial to understand the tidal flat shape and development. Previous work focused predominantly on the quasi-equilibrium shape of tidal flats along open coasts with a dominant cross-shore flow and wave exposure. This paper evaluates the shape of fringing tidal flats in engineered estuaries, where longshore velocities generally dominate. Using a long-term (20 years) topographic data set of an anthropogenically modified estuary in the Netherlands (the Western Scheldt estuary), we relate key profile shape parameters and changes over time to natural and anthropogenic processes. In an engineered estuary, the tidal flat shape depends on the estuary geometry, hydrodynamic forcings and human interventions. In contrast to open coast tidal flats, the presence of the channel and dominant longshore flow determines the available cross-shore length (accommodation space) of the tidal flat and the shape of the tidal flat. This accommodation space defines the maximum tidal flat height and opportunity for marsh development. We propose the use of the Index of Development, indicating to what extend tidal flats have space to develop. This index is not only influenced by longshore and cross-shore flow, but also (or even more) by hydraulic structures, dike realignments and channel migration. Especially the latter two strongly influence the accommodation space and thereby the maximum tidal flat height and the opportunity for marsh development. For large stretches of the Western Scheldt, the accommodation space is too small, and the majority of the tidal flats do not vertically extent to mean high water. The success of tidal flat and marsh restoration projects depends on the accommodation space.@en

Marsh creeks are perceived as important conduits for transporting water and sediment between mudflats and marshes. In order to advance the understanding of the transport mechanisms in creeks, the source and ultimate sink of sediment which moves between mudflats and marshes through creek channels need further investigation. Therefore, two field campaigns were conducted in two intertidal systems with varying sediment availability. The water depth, flow velocity, suspended sediment concentration, and bed level change were measured simultaneously in a marsh creek and on the adjacent mudflat in Chongming Island (China) and in Paulina Saltmarsh (the Netherlands). Paulina Saltmarsh is much smaller, more frequently flooded, and has lower sediment concentration than Chongming. These contrasting conditions allow for a comparison of transport mechanisms and functioning of the creek. Both systems first show that the high suspended sediment concentration (SSC) measured in marsh creeks is mainly the consequence of sediment advection rather than local erosion. In addition, erosion in marsh creeks is usually limited during ebb tides, reducing the export of sediment through these creeks. However, differences have been observed between two systems. The measured SSC was highly asymmetric between flood and ebb tides in Chongming. Large peaks in SSC during the flood period can be observed for most tidal cycles. The marsh creeks in Chongming therefore function as conduits for sediment import. Additionally, there are distinct overbank and underbank tides in Chongming. Sediment was trapped and retained in creeks during underbank tides, which can then be eroded and transported to the marsh during subsequent overbank tides. We also observed that mudflats in Chongming quickly recovered after erosion. These mechanisms have not been observed in Paulina Saltmarsh, where net sediment export via the marsh creek was observed due to a lack of abundant sediment in suspension during flood tides. Furthermore, the remaining bed surface of mudflats after an erosion event was stronger than before, limiting further erosion in Paulina Saltmarsh. These findings from the two systems indicate that the role of creeks in sediment import/export depends on the availability of sediment from mudflats, shedding light on nourishment strategies for salt marshes.

@en

Although tidal flats appear homogeneous from a distance, morphological variations are found on various spatial scales. These are driven by physical and/or biological processes. In this paper, we consider the creeks that are present on fringing tidal flats and which are orientated approximately perpendicular to the main channel. To explain why these creeks occur, we analysed high-resolution aerial pictures and yearly measured LiDAR data of the Ems-Dollard and Western Scheldt estuaries, located in the Netherlands. We selected nine bare fringing tidal flats, with and without creeks in both estuaries. Subsequently, we related the flat shape to the creek occurrence by evaluating cross-sections of tidal flats from the two estuaries. Finally, we studied how the flat shape affects the cross-shore flow velocity with a 1D numerical model to link creek occurrence to tidal flow. The results show highest ebb velocities, the largest velocity gradients and the largest erosion potential at the transition area between the lower and the upper flat. The milder the slope of the upper flat and the shorter the transition zone, the larger the flow velocities. Based on the data analysis and numerical model outcomes, we conclude that the conditions are favourable for creeks on convex-up intertidal flats with a sharp transition between the upper part and lower part of the flat and that they are predominantly found in this transition zone. We finally argue that these tidal creeks are not only a consequence of the tidal flat profile, but also affect the (equilibrium) profile of the tidal flat.

@en

In beaching of tailings, sand and clays may segregate. In laminar flow this is due to shear settling. First implementations of shear settling in numerical flow models are seen, offering unprecedented potential to conduct tailings management studies. In order to validate numerical codes, reference materials are necessary. For laminar flow, there is a small set of flume tests available from an earlier study. An analytical solution for transient sand concentration profile development with distance in laminar open channel flow appeared recently. This analytical method is more complete than an analytical model developed earlier at the author’s institute. Data and analytical solutions are analysed and applied to serve for the validation of numerical flow simulation of beaching in tailings storage facilities. Fair agreement is observed between measurements and the analytical method. Moreover, fair agreement is obtained between an earlier produced computational outcome of the numerical model Delft3D-slurry and analytical solution. This contributes to building confidence in this model as an aid in supporting tailings deposition management.@en