Regional-scale assessment of the damage caused by earthquakes to structures is crucial for post-disaster management. While remote sensing techniques can be of great help for a quick post-event structural assessment of large areas, currently available methods are limited to the detection of severely-damaged buildings. Furthermore, remote sensing-based assessment methods typically provide only qualitative results, as they lack integration with information on the building's behaviour in response to seismic-induced ground shaking. In this study, we developed a new methodology that uses airborne Light Detection And Ranging (LiDAR) data in combination with structural indicators of building response to provide a quantitative assessment of earthquake-induced damage at a regional scale. LiDAR datasets collected before and after an earthquake are used to measure residual displacements of building roofs. The resulting lateral drift estimations are used to quantify the level of damage for a specific building typology. Application to the LiDAR datasets collected before and after the 2014 earthquake in Napa Valley, California, demonstrates the capability of the proposed method to detect moderate levels of structural damage, proving its potential for faster and more accurate support to post-disaster management.

@en

Earthquakes are natural hazards leading to the greatest human and economic losses, which are mostly due to structural collapses. Rapid identification and assessment of earthquake-induced damage to structures is therefore an essential component of the emergency response, and instrumental to effective reconstruction plans. Typically, structural damage assessment is conducted through building-by-building inspections during post-earthquake field reconnaissance missions. These missions are expensive and time-consuming, especially if large areas need to be investigated. Remote sensing techniques provide a relatively low-cost, wide-area alternative to in-situ monitoring. Classification and change detection based on pre- and post-event optical and synthetic aperture radar (SAR) satellite images are the most used approaches to detect damaged structures after earthquakes. However, these techniques only provide qualitative observations of collapsed or severely damaged structures. In this work, we present a new approach for the quantitative assessment of earthquake-induced structural damage based on displacement measurements acquired by Airborne Light Detection And Ranging (LiDAR). The approach is based on the integration between LiDAR-based observations and structural indicators of damage. The application to the analysis of 684 buildings affected by the 2014 Napa earthquake, in California, demonstrates a good agreement between the LiDAR-based results and independent in-situ observations. This work sets the basis for the innovative exploitation of remote sensing data in disaster management. @en