The continuous monitoring of ground deformations can be provided by various methods, such as leveling, photogrammetry, laser scanning, satellite navigation systems, Synthetic Aperture Radar (SAR), and many others. However, ensuring sufficient spatiotemporal resolution of high-accuracy measurements can be challenging using only one of the mentioned methods. The main goal of this research is to develop an integration methodology, sensitive to the capabilities and limitations of Differential Interferometry SAR (DInSAR) and Global Navigation Satellite Systems (GNSS) monitoring techniques. The fusion procedure is optimized for local nonlinear strong deformations using the forward Kalman filter algorithm. Due to the impact of unexpected observations discontinuity, a backward Kalman filter was also introduced to refine estimates of the previous system’s states. The current work conducted experiments in the Upper Silesian coal mining region (southern Poland), with strong vertical deformations of up to 1 m over 2 years and relatively small and horizontally moving subsidence bowls (200 m). The overall root-mean-square (RMS) errors reached 13, 17, and 35 mm for Kalman forward and 13, 17, and 34 mm for Kalman backward in North, East, and Up directions, respectively, in combination with an external data source - GNSS campaign measurements. The Kalman filter integration outperformed standard approaches of 3-D GNSS estimation and 2-D InSAR decomposition.

@en

Tropospheric wet delay, the main source of which is water vapor, is one of the major factors affecting the accuracy of positioning techniques using microwave. Tropospheric tomography is a powerful method to reconstruct the water vapor content in four-dimensional (4D) space. This paper studies the effect of using function-based and voxel-based tropospheric tomography methods on the positioning accuracy. This examination is performed on the static and kinematic positioning modes using Global Navigation Satellite Systems (GNSS) stations under different weather conditions. After validating the results of tomography methods using radiosonde observations, the tomography-based positioning solutions, including function-based and voxel-based approaches, are compared with the positions obtained using tropospheric models. The results of two GPS stations show that the accuracy increases when applying tomography approaches. The function-based tomography is able to increase the accuracy of the up component of the static and kinematic modes by about 0.42 and 0.79 cm, respectively, compared to the voxel-based method. In addition, the use of the function-based tropospheric tomography can decrease the convergence time of the kinematic Precise Point Positioning (PPP) solution.

@en

The water vapor content in the atmosphere can be reconstructed using the all-weather condition troposphere tomography technique. In common troposphere tomography, the water vapor of each voxel is represented by an unknown parameter. This means that when the desired spatial resolution is high or study area is large, there will be a huge number of unknown parameters in the problem that need to be solved. This defect can reduce the accuracy of troposphere tomography results. In order to overcome this problem, an optimal voxel-based troposphere tomography using the Weather Research and Forecasting (WRF) model is proposed. The new approach reduces the number of unknown parameters, the number of empty voxels and the role of constraints required to enhance the spatial resolution of tomography results in required areas. Furthermore, the effect of considering the topography of the study area in the tomography model is examined. The obtained water vapor is validated by radiosonde observations and Global Positioning System (GPS) positioning results. Comparison of the results with the radiosonde observations shows that using the WRF model outputs and topography of the area can reduce the Root Mean Square Error (RMSE) by 0.803 gr/m3. Validation using positioning shows that in wet weather conditions, the WRF model outputs and topography reduce the RMSE of the east, north and up components by about 17.42, 10.46 and 20.03 mm, which are equivalent to 46.01%, 35.78% and 53.93%, respectively.@en