The flow around wind turbine towers usually reaches very high Reynolds numbers greater than a million. Understanding the flow around the towers under these conditions is crucial, as it may lead to vibrations due to the vortices formed. Investigating aerodynamic characteristics at such high Reynolds numbers, both numerically and experimentally, is challenging. The current study validates such an experimental study, where a rough surface is employed to increase the effective Reynolds numbers and accelerate the laminar-turbulent transition in the boundary layer. Unsteady Reynolds-Averaged Navier-Stokes (RANS) simulations are carried out using OpenFOAM for a Reynolds number range of 1.36·105 to 6.8·105. The constant (a 1) used to calculate the eddy viscosity is varied to simulate the flow separation during adverse pressure gradients. A force partitioning method is implemented in OpenFOAM and various force contributions are analysed for this Reynolds number range. It is seen that the RANS simulations overpredict the aerodynamic characteristics and the extent of flow separation unless the value of a 1 is varied as a function of the Reynolds number. Furthermore, it is observed that the only force contributor is the vorticity-induced force, as the simulations are performed for a fixed cylinder.

@en

Vortex-induced vibration (VIV) of wind turbine towers during installation is an aero-structural problem of significant practical relevance. Vibrations may happen in the tower structure, especially when the rotor-nacelle assembly is not yet attached to the tower or if the rotor blades are not yet connected to the tower-nacelle assembly. The complexity of aeroelastic phenomena involved in VIV makes modelling and analysis challenging. Therefore, the aim of the current research is to investigate the fundamental mechanisms causing the onset and sustenance of vortex-induced vibrations. To gain more understanding of the nature of vibrations, a methodology is established that distinguishes between different components of the forces at play. This approach allows for identifying how various force components impact the oscillation of a rigid body. The method is executed using the OpenFOAM open-source software. Numerical simulations are conducted on a two-dimensional smooth cylinder at both subcritical and supercritical Reynolds numbers to establish a correlation between wind turbine tower vibrations and the force mechanism. The analysis involves performing unsteady Reynolds-averaged Navier–Stokes (URANS) simulations using the modified pimpleFoam solver with the k–ω shear stress transport (SST) turbulence model. Both fixed and free-vibrating cases are studied for smooth cylinders. For the high-Reynolds-number cases, a setup matching the tower top segment of the IEA 15 MW reference wind turbine was chosen. Studying the flow around a cylinder at a subcritical Reynolds number reveals that the primary force involved is the vortex-induced force. The combined force due to viscosity, added mass, and vorticity contributes most to the overall force. For a freely vibrating cylinder with a single degree of freedom in the crossflow direction, the analysis indicates that the force component associated with the cylinder's motion is crucial and significantly affects the total force. Moreover, analysing the energy transfer between the fluid and the structure, a positive energy contribution by the vortex-induced force is observed on or before the dominant Strouhal velocity. This confirms observations at low Reynolds numbers in the literature that the vortex shedding predominantly contributes to the initiation of oscillations during VIV. The kinematic force contributes to the energy transfer of the system, but the mean energy transfer per cycle is negligible.@en