Gal/Xgal U/LDB Spectroscopic/ Stratospheric THz Observatory (GUSTO) is a NASA Explorers Mission of Opportunity that will make large scale maps of the Milky Way and Large Magellanic Cloud in three important interstellar lines: [CII], [OI], and [NII] at 158, 63, and 205 μm, respectively. During its ~75 day stratospheric (~36 km) flight, GUSTO’s 0.9-meter balloon-borne telescope and THz heterodyne array receivers will provide the spectral and spatial resolution needed to untangle the complexities of the interstellar medium by probing all phases of its Life Cycle. The GUSTO payload consists of (1) a telescope; (2) three 8-pixel heterodyne array receivers; (3) autocorrelator spectrometers; (4) instrument control electronics; and (5) a cryostat. The GUSTO gondola is derived from successful APL designs. Much of the GUSTO instrument architecture and hardware is based on the experience gained in developing and flying the Stratospheric Terahertz Observatory (STO). GUSTO is currently undergoing integration and test and will launch from the NASA Long Duration Balloon (LDB) Facility near McMurdo, Antarctica in December 2023.@en

The grating design for the 4.7 THz channel of GUSTO (Galactic/ Extragalactic ULDB Spectroscopic Terahertz Observatory) has been reported in this paper, which acts as a beam multiplexer for coupling a single QCL (Quantum Cascade Laser) beam to an 8-pixel mixer array. The design and analysis are based on modeling and simulations showing a successful accommodation of the requirements from the designed optical system. The asymmetric feature is used and to be applied for the first time at such a frequency range.@en

GUSTO will be a NASA balloon borne terahertz observatory to be launched from Antarctica in late 2021 for a flight duration of 100-170 days. It aims at reviewing the life cycle of interstellar medium of our galaxy by simultaneously mapping the three brightest interstellar cooling lines: [OI] at 4.7 THz, [CII] at 1.9 THz, and [NII] at 1.4 THz; along the 124 degrees of the galactic plane and through a part of the Large Magellanic Cloud. It will use three arrays of 4x2 mixers based on NbN hot electron bolometers (HEBs), which are currently the most sensitive mixers for high resolution spectroscopic astronomy at these frequencies. Here we report on the design of a novel 4.7 THz receiver for GUSTO. The receiver consists mainly of two subsystems: a 4×2 HEB quasi-optical mixer array and a 4.7 THz multi-beam LO. We describe the mixer array, which is designed as a compact monolithic unit. We show, for example, 10 potential HEB detectors with the state of the art sensitivity of 720 K measured at 2.5 THz. They have a small variation in sensitivity, being less than 3%, while also meet the LO uniformity requirements. For the multi-beam LO we demonstrate the combination of a phase grating and a single QCL at 4.7 THz, which generates 8 sub-LO beams, where the phase grating shows an efficiency of 75%. A preliminary concept for the integrated LO unit, including QCL, phase grating and beam matching optics is presented.

@en