The impacts of climate change, combined with population growth, necessitate practical and effective solutions for locating groundwater resources and ensuring drinking water quality. Our contribution explores recent advances in geoelectrical and electromagnetic imaging methods applied to investigate groundwater systems. Geoelectrical and electromagnetic imaging techniques are popular methods for characterising subsurface properties, such as electrical resistivity or dielectric permittivity. These electrical properties are strongly related to the hydrogeological characteristics of the subsurface. Therefore, geoelectrical and electromagnetic investigations can provide valuable insights into finding groundwater resources, assessing the water quality in terms of contaminations and conducting effective groundwater management.

Our study examines state-of-the-art approaches in modelling and instrumentation of induced polarisation and electrical resistivity tomography, as well as time- and frequency-domain electromagnetics and ground-penetrating radar methods. We review recent impactful and innovative groundwater case studies where the above-mentioned methods were applied and further developed. Emphasising the combination of geoelectrical and electromagnetic methods, the studies provide insights into the variation of electrical subsurface properties at different scales, contributing to an improved understanding of the hydrological dynamics in the studied areas. Furthermore, we provide an outlook on the potential for applying geoelectrical and electromagnetic imaging techniques for large-scale groundwater investigations in the exascale computing area.@en

In 3D geo-electromagnetic modeling, an adequate discretisation of the modeling domain is crucial to obtain accurate forward responses and reliable inversion results while reducing the computational cost. This paper investigates the mesh design for subsurface models, including steel-cased wells, which is relevant for many exploration settings but still remains a numerically challenging task. Applying a goal-oriented mesh refinement technique and subsequent calculations with the high-order edge finite element method, simulations of 3D controlled-source electromagnetic models in the presence of metallic infrastructure are performed. Two test models are considered, each needing a distinct version of approximation methods to incorporate the conductive steel casings of the included wells. The influence of mesh quality, goal-oriented meshing, and high-order approximations on problem sizes, computational cost, and accuracy of electromagnetic responses is investigated. The main insights of our work are: (a) the applied numerical schemes can mitigate the computational burden of geo-electromagnetic modeling in the presence of steel artifacts; (b) investigating the processes driving the meshing of models with embedded metallic infrastructures can lead to adequate strategies to deal with the inversion of such electromagnetic data sets. Based on the modeling results and analyses conducted, general recommendations for modeling strategies are proposed when performing simulations for challenging steel infrastructure scenarios.@en

Large-scale modelling of 3-D controlled-source electromagnetic (CSEM) surveys used to be feasible only for large companies and research consortia. This has changed over the last few years, and today there exists a selection of different open-source codes available to everyone. Using four different codes in the Python ecosystem, we perform simulations for increasingly complex models in a shallow marine setting. We first verify the computed fields with semi-analytical solutions for a simple layered model. Then we validate the responses of a more complex block model by comparing results obtained from each code. Finally, we compare the responses of a real-world model with results from the industry. On the one hand, these validations show that the open-source codes are able to compute comparable CSEM responses for challenging, large-scale models. On the other hand, they show many general and method-dependent problems that need to be faced for obtaining accurate results. Our comparison includes finite-element and finite-volume codes using structured rectilinear and octree meshes as well as unstructured tetrahedral meshes. Accurate responses can be obtained independently of the chosen method and the chosen mesh type. The runtime and memory requirements vary greatly based on the choice of iterative or direct solvers. However, we have found that much more time was spent on designing the mesh and setting up the simulations than running the actual computation. The challenging task is, irrespective of the chosen code, to appropriately discretize the model. We provide three models, each with their corresponding discretization and responses of four codes, which can be used for validation of new and existing codes. The collaboration of four code maintainers trying to achieve the same task brought in the end all four codes a significant step further. This includes improved meshing and interpolation capabilities, resulting in shorter runtimes for the same accuracy. We hope that these results may be useful for the CSEM community at large and that we can build over time a suite of benchmarks that will help to increase the confidence in existing and new 3-D CSEM codes.@en