MN

M.R. Nabavi

info

Please Note

2 records found

This paper presents a comprehensive study of demodulation techniques for high-frequency self-oscillating eddy-current displacement sensor (ECDS) interfaces. Increasing the excitation frequency is essential for lowering the skin depth in many demanding industrial applications, that require better resolution. However, a high excitation frequency poses design challenges in the readout electronics, and particularly in the demodulation functional block. We analyze noise, linearity, and stability design considerations in amplitude demodulators for nanometer and sub-nanometer ECDSs. A number of state-of-the-art amplitude demodulation techniques employed in high-frequency ECDSs are reviewed, and their pros and cons are evaluated. ...
Displacement sensing with sub-nanometer resolution is required in advanced metrology and high-tech industry, e.g., to measure the lens position in wafer scanners. Linear encoders and interferometers are often used for this purpose, but they are bulky and costly. Capacitive sensors [1], though compact, are sensitive to environment and require electrical access to the target. Eddy-current sensors (ECSs) do not have these disadvantages, but their resolution and stability are limited by the skin-effect [2-5]. For sub-nm measurements, this can be alleviated by using excitation frequencies >100MHz. This calls for stable flat sensing coils (to minimize parasitics) in close proximity to the ECS interface, whose power dissipation must then be low enough to avoid self-heating and displacement errors due to thermal expansion [2,6]. ...