Temperature variation plays a significant role in the long-term structural behaviour of civil infrastructures, but very few quantitative studies have measured and analysed the infrastructures' global thermal dilation because of their large sizes and geometric complexities. The modern Differential Synthetic Aperture Radar Interferometry (DInSAR) technique has great potential in applications of their thermal dilation mapping and characterization due to the techniques' unique capabilities for use in large areas, with high-resolution, and at low-costs for deformation measurements. However, the practical application of DInSAR in thermal dilation estimation is limited by difficulty in the precise separation from the residual topographic phase and the trend deformation phase. Moreover, due to a lack of thermal dilation characteristics analyses in previous studies, the thermal dilation mechanisms are still unclear to users, which restricts the accurate understanding of the thermal dilation evolution process. Given the above challenges, an advanced multi-temporal DInSAR approach is proposed in this study, and the effectiveness of this approach was presented using three cases studies concerning different infrastructure types. In this method, the coherent, incoherent, and semantic information of structures were combined in order to refine the detection of point-like targets (PTs). Interferometric subsets with small temporal baselines and temperature differences were used for high-resolution topography estimation. A pre-analysis was adopted to determine the transmission direction, spatial pattern, and temporal variation of the thermal dilation. Then, both the traditional least squares estimation and our robust coherence-weighted least squares regression analysis were performed between the time series displacements and the corresponding temperatures to quantitatively estimate the thermal dilation model. The results were verified in terms of the estimated linear thermal dilation coefficient, which indicates the greater reliability of our method. Furthermore, the thermal dilation characteristics of different civil infrastructure types were analysed, which facilitates a greater understanding of the thermal dilation evolution process of civil infrastructures.

Large-scale reclamation projects during the past decades have been recognized as one of the driving factors behind land subsidence in coastal areas. However, the pattern of temporal evolution in reclamation settlements has rarely been analyzed. In this work, we study the spatio-temporal evolution pattern of Linggang New City (LNC) in Shanghai, China, using space-borne synthetic aperture radar interferometry (InSAR) methods. Three data stacks including 11 X-band TerraSAR-X, 20 L-band ALOS PALSAR, and 35 C-band ENVISAT ASAR images were used to retrieve time series deformation from 2007 to 2010 in the LNC. An InSAR analysis from the three data stacks displays strong agreement in mean deformation rates, with coefficients of determination of about 0.9 and standard deviations for inter-stack differences of less than 4 mm/y. Meanwhile, validations with leveling data indicate that all the three data stacks achieved millimeter-level accuracies. The spatial distribution and temporal evolution of deformation in the LNC as indicated by these InSAR analysis results relates to historical reclamation activities, geological features, and soil mechanisms. This research shows that ground deformation in the LNC after reclamation projects experienced three distinct phases: primary consolidation, a slight rebound, and plateau periods.

Arch bridges are important transportation infrastructures widely distributed in China, but they are prone to structural defects due to aging without routine inspection and maintenance. Therefore, Structural Health Monitoring (SHM) of these bridges is urgently needed by civil engineers to effectively reduce the risk of bridge damage or collapse on public safety. An essential method for SHM, the modern Differential Synthetic Aperture Radar Interferometry (DInSAR) technique, can detect subtle deformation of bridges at relatively low costs. Nevertheless, identifying dense point-like targets (PTs) on such partially coherent arch bridges in SAR image is more difficult than that for other man-made objects, owing to their complex structures and backscattering behaviors. Furthermore, the complex mechanical properties of arch bridges, due to the varying arch-beam interactions, make it hard to separate the surface deformation and thermal dilation accurately, and the lack of specific structural knowledge, that can help to understand the deformation evolution process, limits the global structural risk assessment. Aiming at these problems, we developed a structure-driven multi-temporal DInSAR approach for arch bridge-specific SHM. By introducing three structure-driven steps, i.e. backscattering geometrical interpretation, linear thermal dilation estimation and validation, and Deformation Feature Points (DFPs) based risk assessment, into the traditional DInSAR method, the reliability of PTs identification, thermal dilation separation, and structural risk assessment for arch bridges are significantly improved. The effectiveness of our approach was fairly presented by two case studies of the Rainbow and Lupu bridges, and the experimental results were verified by leveling benchmark validation, cross-sensor comparison, as well as structural-reliability assessment. Our results revealed that arch bridges exhibit a similar pattern of PTs distribution that is dense around piers and sparse on the spans, as well as a symmetrical progressive pattern of surface deformation with the subsidence increasing from piers and reaching a peak at the central spans. In contrast, magnitudes and mechanisms of thermal dilation are different, and highly dependent on the materials and structural characteristics of specific bridges.

Thermal dilation is a vital component of deformation along the extensive railway network infrastructure. To monitor subtle deformation, the synthetic aperture radar interferometry (InSAR) technique has been adopted as a space-borne geodetic tool. However, InSAR applications in railway stability surveillance have been largely limited by the sparseness of detectable point-like targets (PTs). Moreover, only one-dimensional linear displacements in radar line-of-sight direction can be measured by a single data stack. To address these issues, we developed an improved persistent scatterers InSAR approach that can retrieve thermal dilation effects with an increased number of PTs along the railways. This proposed strategy effectively combines SAR amplitude, interferometric phase, and the spatial information of railway structures to maximize the number of PTs. A least square fitting of the residual phase obtained by iterative spatial-temporal filtering with respect to temperature difference is used to estimate the thermal dilation of metal and concrete-asphalt materials. To validate the effectiveness of this approach, case studies using ENVISAT ASAR (ASAR) and TerraSAR-X (TSX) datasets were carried out on the railways of Beijing–Tianjin, Beijing–Shanghai, and Shanghai–Hangzhou. Subsidence velocity, gradient, and thermal dilation were used to identify hazardous grades along each railway. Furthermore, linear deformation rates in two dimensions, i.e., vertical and west-east directions, along Shanghai–Hangzhou Railway were inverted from ascending ASAR and descending TSX observations to reveal track conditions at a high level of detail.

Since the Persistent Scatterer Synthetic Aperture Radar (SAR) Interferometry (PSI) technology allows the detection of ground subsidence with millimeter accuracy, it is becoming one of the most powerful and economical means for health diagnosis of major transportation infrastructures. However, structures of different types may suffer from various levels of localized subsidence due to the different structural characteristics and subsidence mechanisms. Moreover, in the complex urban scenery, some segments of these infrastructures may be sheltered by surrounding buildings in SAR images, obscuring the desirable signals. Therefore, the subsidence characteristics on different types of structures should be discussed separately and the accuracy of persistent scatterers (PSs) should be optimized. In this study, the PSI-based subsidence mapping over the entire transportation network of Shanghai (more than 10,000 km) is illustrated, achieving the city-wide monitoring specifically along the elevated roads, ground highways and underground subways. The precise geolocation and structural characteristics of infrastructures were combined to effectively guide more accurate identification and separation of PSs along the structures. The experimental results from two neighboring TerraSAR-X stacks from 2013 to 2016 were integrated by joint estimating the measurements in the overlapping area, performing large-scale subsidence mapping and were validated by leveling data, showing highly consistent in terms of subsidence velocities and time-series displacements. Spatial-temporal subsidence patterns on each type of infrastructures are strongly dependent on the operational durations and structural characteristics, as well as the variation of the foundation soil layers.