Despite the increasing use of non-hydrostatic models in the study of wave processes in coastal regions, there is still limited understanding of the non-linear properties of the governing equations and how they improve with increased vertical resolution. In this study, the governing equations of the non-hydrostatic wave model SWASH are analysed and the linear and non-linear solutions up to third-order of all dependent variables are derived, considering one to four vertical layers. The analysis concludes that the model can achieve excellent non-linear properties with respect to the Stokes theory over a large range of water depths using only a few vertical layers. Furthermore, deriving solutions for all variables enables the formulation of improved wave generation and absorption boundary conditions for non-hydrostatic models. A well-known issue of non-linear wave models is related to the generation and propagation of spurious free waves, resulting to non-homogeneous wave fields. In this study, it is proven that by imposing the derived exact mathematical solutions of the governing equations at the model's boundaries, the target first- and second-order wave profiles can be generated with high accuracy, while the spurious waves can be entirely eliminated.

@en

The weakly reflective wave generation is a wave generation and absorption method in phase-resolving models, based on the assumption that the waves propagating towards the wave generation boundary are small amplitude shallow water waves with direction perpendicular to the boundary. This assumption makes the method weakly reflective for dispersive and directional waves. The internal wave generation method was proposed by Vasarmidis et al. (2019b) as an alternative, for the non-hydrostatic wave model, SWASH, to avoid reflections. In this study, a comparison is made between the performance of the new internal wave generation method and the weakly reflective wave generation method. It is shown that using the internal wave generation leads to a significantly more accurate prediction of the resulting wave field in case of waves reflected back to the numerical boundary. Additionally, the internal wave generation method is extended to short-crested waves and SWASH is validated for the first time with experimental data for the cases of wave propagation over a shoal and wave diffraction around a wall. The proposed extended internal wave generation method increases the capability of SWASH towards the study of wave propagation of highly dispersive short-crested waves in coastal environments with minimal reflection from the boundaries.

@en

In this work, internal wave generation techniques are developed in an open source non-hydrostatic wave model (SimulatingWAves till SHore, SWASH) for accurate generation of regular and irregular long-crested waves. Two different internal wave generation techniques are examined: a source term addition method where additional surface elevation is added to the calculated surface elevation in a specific location in the domain and a spatially distributed source functionwhere a spatially distributed mass is added in the continuity equation. These internal wave generation techniques in combination with numerical wave absorbing sponge layers are proposed as an alternative to the weakly reflective wave generation boundary to avoid re-reflections in case of dispersive and directional waves. The implemented techniques are validated against analytical solutions and experimental data including water surface elevations, orbital velocities, frequency spectra and wave heights. The numerical results show a very good agreement with the analytical solution and the experimental data indicating that SWASH with the addition of the proposed internal wave generation technique can be used to study coastal areas and wave energy converter (WEC) farms even under highly dispersive and directional waves without any spurious reflection from the wave generator.@en