In volcanic and hydrothermal geosystems, monitoring of mass and stress changes provide information for both volcanic hazardassessment and estimation of geothermal resources. The combined continuous recording of the gravity field and ground motionwith sufficient accuracy in an active volcano-tectonic setting allows a better understanding of the mass and stress transfermechanisms that produce short term gravity changes and local seismic activity. The aim is to gain a better understanding ofgeothermal system processes by addressing short-term mass changes within geothermal reservoirs in relation to external influencessuch as anthropogenic (reservoir exploitation) and natural forcing (local and regional earthquake activity and earth tides). Thiscontributes to knowing the reservoir properties, structure and long-term behaviour.Þheistareykir (Northeast Iceland), where the geothermal power production started in autumn 2017 (2x45 MWe) is the site chosenfor this unique experiment. The overall goal of the project is to use a network of continuously measuring gravity meters to detectsmall variations in gravity associated with managing a geothermal field (injection and extraction). The gravity changes are expectedto be small: ~5 µgal/6 months (1 µgal=10-8 ms-2). Therefore, high performance and up-to-date instrumentation such assuperconducting gravity meters (SG), spring gravity meters and broadband seismometers are used. To achieve these goals, inautumn 2017 a network of 5 relative gravity meters (3 iGravs and 2 gPhones) and 14 seismic stations were deployed. Three gravitymonitoring sites are in close vicinity to the production and injection area, and one iGrav is set up outside the geothermal field forreference. Presented in this report are the details of the infrastructure and instruments deployed and the first results of more than 18months of continuous gravity and seismicity monitoring.@en

As changes in gravity are directly related to mass variability, satellite missions observing the Earth's time varying gravity field are a unique tool for observing mass transport processes in the Earth system, such as the water cycle, rapid changes in the cryosphere, oceans, and solid Earth processes, on a global scale. The observation of Earth's gravity field was successfully performed by the GRACE and GOCE satellite missions, and will be continued by the GRACE Follow-On mission. A comprehensive team of European scientists proposed the next-generation gravity field mission MOBILE in response to the European Space Agency (ESA) call for a Core Mission in the frame of Earth Explorer 10 (EE10). MOBILE is based on the innovative observational concept of a high-low tracking formation with micrometer ranging accuracy, complemented by new instrument concepts. Since a high-low tracking mission primarily observes the radial component of gravity-induced orbit perturbations, the error structure is close to isotropic. This geometry significantly reduces artefacts of previous along-track ranging low-low formations (GRACE, GRACE-Follow-On) such as the typical striping patterns. The minimum configuration consists of at least two medium-Earth orbiters (MEOs) at 10000 km altitude or higher, and one low-Earth orbiter (LEO) at 350-400 km. The main instrument is a laser-based distance or distance change measurement system, which is placed at the LEO. The MEOs are equipped either with passive reflectors or transponders. In a numerical closed-loop simulation, it was demonstrated that this minimum configuration is in agreement with the threshold science requirements of 5 mm equivalent water height (EWH) accuracy at 400 km wavelength, and 10 cm EWH at 200 km. MOBILE provides promising potential future perspectives by linking the concept to existing space infrastructure such as Galileo next-generation, as future element of the Copernicus/Sentinel programme, and holds the potential of miniaturization even up to swarm configurations. As such MOBILE can be considered as a precursor and role model for a sustained mass transport observing system from space.

@en