T. Chen
Please Note
3 records found
1
Diamond qubits integrated with photonic circuits can be initialized, manipulated, entangled, and read out individually with high fidelity, making them attractive for large-scale quantum systems. However, the limited size of heteroepitaxially grown single-crystal diamond and photonic-grade diamond-on-insulator (DOI) remains challenging for integration with existing manufacturing processes. Here, we develop a plasma etch recipe to thin direct-bonded (100) single-crystal diamond ((Formula presented) ) into large-area, thin-film DOI, and demonstrate free-standing photonic chiplets fabricated from the resulting DOI. The ICP-RIE recipe preserves bonding and provides sufficient micro-masking and surface-quality control. We thin a (Formula presented) diamond bonded to (Formula presented) and obtain a photonic-grade DOI with diamond thickness (Formula presented) over (Formula presented) with roughness (Formula presented). Diamond photonic chiplets are fabricated using a standard two-step lithography process, without complex thin-film transfer, under-etching, or pedestal formation. We also present a colorimetric study of diamond visibility and quantify color differences across thicknesses in common colorimetric spaces. This analysis enables automatic diamond-thickness extrapolation from standard optical microscope images with 5 nm resolution, in good agreement with white-light interferometry (WLI) measurements. The DOI substrate and colorimetric thickness-evaluation method provide an effective fabrication platform and reliable validation route for scalable manufacturing of diamond nanophotonic devices.
The direct bonding process of a diamond-on-insulator (DOI) substrate enables monolithic integration of diamond photonic structures for quantum computing by improving photon collection efficiency and entanglement generation rate between emitters. It also addresses key fabrication challenges, such as robustness, bonding strength, and scalability. This study investigates strain effects in DOI substrates following direct bonding. Strain generation is expected near the diamond–SiO2/Si interface due to the thermal expansion coefficient mismatch between the bonded materials. Strain-induced lattice distortions are characterized using nitrogen-vacancy (NV) centers in diamond via optically detected magnetic resonance (ODMR) and photoluminescence (PL) mapping. PL mapping reveals interference fringes in unbonded regions, indicating bonding irregularities. Depth-resolved ODMR measurements show a volumetric strain component increase of ≈0.45 MHz and a shear component increase of ≈0.71 MHz between the top surface and the DOI interface. However, ODMR signal contrast and peak linewidth remain largely unaffected, suggesting no visible deterioration in the optical properties of the emitters. By combining ODMR and PL mapping, this work establishes a robust methodology for assessing bonding quality and strain impact on NV centers, an essential step toward advancing scalable quantum technologies and integrated photonic circuits.
Diamond has emerged as a leading material for solid-state spin quantum systems and extreme environment electronics. However, a major limitation is that most diamond devices and structures are fabricated using bulk diamond plates. The absence of a suitable diamond-on-insulator (DOI) substrate hinders the advanced nanofabrication of diamond quantum and electronic devices, posing a significant roadblock to large-scale, on-chip diamond quantum photonics and electronics systems. In this work, we demonstrate the direct bonding of (100) single-crystal diamond plates to PECVD-grown SiO2/Si substrates at low temperatures and atmospheric conditions. The surfaces of the SiO2 and diamond plates are then activated using oxygen plasma and Piranha solution, respectively. Bonding occurs when the substrates are brought into contact with water in between and annealed at 200 °C under atmospheric conditions, resulting in a DOI substrate. We systematically studied the influence of Piranha solution treatment time and diamond surface roughness on the shear strength of the bonded substrate, devising an optimal bonding process that achieves a high yield rate of 90% and a maximum shear strength of 9.6 MPa. X-ray photoelectron spectroscopy was used for quantitative analysis of the surface chemicals at the bonding interface. It appears that the amount of -OH bindings increases with the initial roughness of the diamond, facilitating the strong bonding with SiO2. This direct bonding method will pave the way for scalable manufacturing of diamond nanophotonic devices and enable large-scale integration of diamond quantum and electronic systems.