In this work, we have used cyclic voltammetry to investigate the interfacial behavior of cocaine cutting agents at the electrified liquid-liquid interface formed between a solution of the water and 1,2-dichloroethane phases. Among 27 chemical species used to adulterate cocaine street samples, only 8 were detectable in the available potential window. These include procaine, lidocaine, levamisole, hydroxyzine, caffeine, phenylethylamine, diltiazem, and diphenhydramine. From the calibration curves obtained using voltammetric data, we have extracted the electroanalytical parameters such as detection sensitivities, limits of detection, and limits of quantifications. Also, for each electrochemically active drug, we have calculated diffusion coefficients and plotted the ion partition and concentration fraction diagrams. All this information is discussed in a view of the cocaine sensors development focused on its detection from demanding matrix defined by the street samples composition.

Cancer is most frequently treated with antineoplastic agents (ANAs) that are hazardous to patients undergoing chemotherapy and the healthcare workers who handle ANAs in the course of their duties. All aspects related to hazardous oncological drugs illustrate that the monitoring of ANAs is essential to minimize the risks associated with these drugs. Among all analytical techniques used to test ANAs, electrochemistry holds an important position. This review, for the first time, comprehensively describes the progress done in electrochemistry of ANAs by means of a variety of bare or modified (bio)sensors over the last four decades (in the period of 1982–2021). Attention is paid not only to the development of electrochemical sensing protocols of ANAs in various biological, environmental, and pharmaceutical matrices but also to achievements of electrochemical techniques in the examination of the interactions of ANAs with deoxyribonucleic acid (DNA), carcinogenic cells, biomimetic membranes, peptides, and enzymes. Other aspects, including the enantiopurity studies, differentiation between single-stranded and double-stranded DNA without using any label or tag, studies on ANAs degradation, and their pharmacokinetics, by means of electrochemical techniques are also commented. Finally, concluding remarks that underline the existence of a significant niche for the basic electrochemical research that should be filled in the future are presented.

In this work, the electrified liquid–liquid interface (LLI) was supported with the bare and polyelectrolyte modified fiberglass membranes. The permeability of these supports was then investigated with ion transfer voltammetry (ITV). This work descends from three mutually interconnected experimental tasks. (i) The study of an interfacial behavior of three polyelectrolytes, poly(ethyleneimine) (PEI), polystyrene sulfonate (PSS), and polyhexamethylene guanidine (PHMG) at the polarized LLI. (ii) Electrochemical characterization of the LLI supported by the unmodified fiberglass membrane. (iii) Polyelectrolyte multilayer placement, using layer-by-layer processing, at the surface of the fiberglass membrane and its further utilization as the support for the electrified LLI. Bare and modified membranes were characterized using ITV in the presence of a family of quaternary ammonium cations: tetramethylammonium (TMA⁺), tetraethylammonium (TEA⁺), tetrapropylammonium (TPrA⁺) and tetrabutylammonium (TBA⁺) initially dissolved in the aqueous phase as the chloride salts. The ionic currents related to their transmembrane transfer were affected already after the first polyelectrolyte layer placement. In addition to electrochemistry, the modification process was followed using several complementary techniques, including optical microscopy (OM), atomic force microscopy (AFM), infra-red (IR) spectroscopy, and scanning electron microscopy (SEM). The proposed methodology offers very simple, fast, and versatile (having in mind the available selection of functional polyelectrolytes) protocol for a membrane preparation having size sieving properties. In turn, the electrochemistry at the LLI can be used as an insightful tool to study the ionic transmembrane currents.

In this paper, the electrochemical behavior of four fluoroquinolone antibiotics (FAs) [Ciprofloxacin (Cip), Enrofloxacin (Enr), Marbofloxacin (Mar) and Ofloxacin (Ofl)] at a polarized interface between two immiscible electrolyte solutions (ITIES) has been studied using ion–transfer voltammetry (ITV). The measurements were conducted in the traditional macroscopic (macro-ITIES) and a recently developed miniaturized (micro-ITIES) platform. The latter was obtained from fused silica micro-capillaries having an internal diameter of 25 μm. We used macroITIES to obtain a number of analytical parameters such as: standard Galvani potential of ion transfer (ΔΦ⁰), diffusion coefficients (D), free Gibbs energy of ion transfer (ΔG⁰) and partition coefficients (logP_DCE). The latter were compared with the available literature values of logP_octanol. The effect of concentration of the studied antibiotics on the electrochemical response was investigated with the microITIES platform, setting statistical parameters such as: linear dynamic ranges (LDRs – studied from 1 μM up to 50 μM), lower limit of detections (LODs – around 1 μM) and sensitivity (found in the range from 2.6·10⁻² to 6.8·10⁻² nA·μM⁻). MicroITIES were further used to study the effect of pH on the analytical signal and the results are plotted in a form of ion partition diagrams. Working with microITIES supported with the fused silica capillaries significantly reduced the volumes of consumed chemicals and expedite all analytical experiments. The provided results can be successfully applied in pharmacology and electroanalysis for testing and determination of the chosen fluoroquinolone antibiotics.