Objective. The respiratory rate (RR) is considered one of the most informative vital signals. A well-validated standard for RR measurement in mechanically ventilated patient is capnography; a noninvasive technique for expiratory CO2measurements. Reliable RR measurements in spontaneously breathing patients remains a challenge as continuous mainstream capnography measurements are not available. This study aimed to assess the accuracy of RR measurement using electrical impedance tomography (EIT) in healthy volunteers and intensive care unit (ICU) patients on mechanical ventilation and spontaneously breathing post-extubation. Comparator methods included RR derived from both capnography and bioimpedance electrocardiogram (ECG) measurements.Approach. Twenty healthy volunteers wore an EIT belt and ECG electrodes while breathing through a capnometer within a 10-40 breaths per minute (BPM) range. Nineteen ICU patients underwent similar measurements during pressure support ventilation and spontaneously breathing after extubation from mechanical ventilation. Stable periods with regular breathing and no artefacts were selected, and agreement between measurement methods was assessed using Bland-Altman analysis for repeated measurements.Main result. Bland-Altman analysis revealed a bias less than 0.2 BPM, with tight limits of agreement (LOA) ±1.5 BPM in healthy volunteers and ventilated ICU patients when comparing EIT to capnography. Spontaneously breathing ICU patients had wider LOA (±2.5 BPM) when comparing EIT to ECG bioimpedance, but gold standard comparison was unavailable. RR measurements were stable for 91% of the time for capnography, 68% for EIT, and 64% of the ECG bioimpedance signals. After extubation, the percentage of stable periods decreased to 48% for EIT signals and to 55% for ECG bioimpedance.Significance. In periods of stable breathing, EIT demonstrated excellent RR measurement accuracy in healthy volunteers and ICU patients. However, stability of both EIT and ECG bioimpedance RR measurements declined in spontaneously breathing patients to approximately 50% of the time.

@en

Objective. Electrical impedance tomography (EIT) produces clinical useful visualization of the distribution of ventilation inside the lungs. The accuracy of EIT-derived parameters can be compromised by the cardiovascular signal. Removal of these artefacts is challenging due to spectral overlapping of the ventilatory and cardiovascular signal components and their time-varying frequencies. We designed and evaluated advanced filtering techniques and hypothesized that these would outperform traditional low-pass filters. Approach. Three filter techniques were developed and compared against traditional low-pass filtering: multiple digital notch filtering (MDN), empirical mode decomposition (EMD) and the maximal overlap discrete wavelet transform (MODWT). The performance of the filtering techniques was evaluated (1) in the time domain (2) in the frequency domain (3) by visual inspection. We evaluated the performance using simulated contaminated EIT data and data from 15 adult and neonatal intensive care unit patients. Main result. Each filter technique exhibited varying degrees of effectiveness and limitations. Quality measures in the time domain showed the best performance for MDN filtering. The signal to noise ratio was best for DLP, but at the cost of a high relative and removal error. MDN outbalanced the performance resulting in a good SNR with a low relative and removal error. MDN, EMD and MODWT performed similar in the frequency domain and were successful in removing the high frequency components of the data. Significance. Advanced filtering techniques have benefits compared to traditional filters but are not always better. MDN filtering outperformed EMD and MODWT regarding quality measures in the time domain. This study emphasizes the need for careful consideration when choosing a filtering approach, depending on the dataset and the clinical/research question.@en

Background: Prolonged weaning from mechanical ventilation is associated with poor clinical outcome. Therefore, choosing the right moment for weaning and extubation is essential. Electrical Impedance Tomography (EIT) is a promising innovative lung monitoring technique, but its role in supporting weaning decisions is yet uncertain. We aimed to evaluate physiological trends during a T-piece spontaneous breathing trail (SBT) as measured with EIT and the relation between EIT parameters and SBT success or failure. Methods: This is an observational study in which twenty-four adult patients receiving mechanical ventilation performed an SBT. EIT monitoring was performed around the SBT. Multiple EIT parameters including the end-expiratory lung impedance (EELI), delta Tidal Impedance (ΔZ), Global Inhomogeneity index (GI), Rapid Shallow Breathing Index (RSBI_EIT), Respiratory Rate (RR_EIT) and Minute Ventilation (MV_EIT) were computed on a breath-by-breath basis from stable tidal breathing periods. Results: EELI values dropped after the start of the SBT (p < 0.001) and did not recover to baseline after restarting mechanical ventilation. The ΔZ dropped (p < 0.001) but restored to baseline within seconds after restarting mechanical ventilation. Five patients failed the SBT, the GI (p = 0.01) and transcutaneous CO₂ (p < 0.001) values significantly increased during the SBT in patients who failed the SBT compared to patients with a successful SBT. Conclusion: EIT has the potential to assess changes in ventilation distribution and quantify the inhomogeneity of the lungs during the SBT. High lung inhomogeneity was found during SBT failure. Insight into physiological trends for the individual patient can be obtained with EIT during weaning from mechanical ventilation, but its role in predicting weaning failure requires further study.

@en