A geothermal well doublet, designed with two primary aims; one of research and the second of commercial thermal energy supply, is currently being installed on the campus of Delft University of Technology, with the wells being drilled in the second half of 2023. The project includes a comprehensive research program, involving the installation of a wide range of instruments alongside an extensive logging and coring program and monitoring network. The doublet has been cored, with continuous samples from the heterogenous reservoir being complimented with more distributed side-wall cores, alongside a large suite of open-hole well logs in the reservoir section of both wells. Such investigation is rarely undertaken in geothermal projects. A fiber optic cable will monitor the production well, and will be installed all-the-way down to the reservoir section when the well completion is installed, at approximately 2300m depth. The reservoir is the fluvial Lower Cretaceous Delft Sandstone that is used as a geothermal reservoir in a series of existing and planned doublets in the West Netherlands Basin. A local seismic monitoring network has been installed in the surrounding area with the aim of monitoring very low-magnitude natural or induced seismicity. A vertical observation well with electromagnetic sensors will be drilled in a few y ears’ time between the injector and producer to monitor cold-front propagation. The total project is targeted to supply around 25 MW of thermal energy at peak conditions, next to this project a thermal energy storage system is planned to provide a seasonal buffer. The project is a key national research infrastructure and is being incorporated into the European infrastructure EPOS (European Plate Observing System, https://www.epos-eu.org/), such that accessibility and data availability will be as wide as possible. All observations will be included in a digital-twin framework that will allow better decisions to be made in future geothermal projects. This paper presents the implementation and initial data collection from the project, including an initial evaluation of the logging and coring campaigns.@en

A geothermal doublet has been installed in a sedimentary reservoir for direct-use heating on the TU Delft campus, targeted to supply around 25 MW of thermal energy at peak conditions. This contribution presents the implementation and initial data collection from the doublet, including an initial evaluation of the logging and coring campaign. Nearly half of Netherlands natural gas consumption is allocated to heating, and the on-campus CO2 emissions from heating exceed 50%. The doublet has been designed with two primary aims of research and commercial heat supply, with the wells being completed in December 2023. The project will be operated by a commercial entity, and built into a larger thermal energy system including a high temperature underground storage system, with the first energy production planned in 2025. The research questions relate to field-scale geothermal operations, e.g. how reliable is the long-term energy production?, how do materials perform in the long-term? and how can geothermal projects be best monitored? The research programme involves the installation of a wide range of instruments alongside an extensive logging and coring program and monitoring network. The doublet has been cored, with substantial continuous samples from the heterogenous reservoir, alongside a large suite of open hole well logs in the reservoir and through casing logs in overlying geological units. A fiber-optic cable will monitor distributed pressure throughout the producer reservoir section, at approximately 2300m depth, which will be installed during commissioning. A local seismic monitoring network has been installed in the surrounding area with the aim of monitoring very low-magnitude natural or induced seismicity. The project is a key national research infrastructure and is being incorporated into the European EPOS (European Plate Observing System, https://www.epos-eu.org/), such that accessibility and data availability will be as wide as possible. All observations will be included in a digital-twin framework that will allow to make better decisions in future geothermal projects.@en

Nearly half of the Netherlands’ natural gas consump tion is allocated to heating, with direct -use geothermal heating being one of the available low-carbon energy solutions. A geothermal well doublet, designed with the two primary aims of research and commercial heat supply, is currently being installed on the campus of Delft University of Technology. The project is a key national research infrastructure and is being incorporated into the European sustainable and distributed infrastructure (EPOS: European Plate Observing System, https://www.epos-eu.org/), such that accessibility and data availability will be as wide as possible. All observations will be included in a digital-twin framework, which will allow us to make better decisions in future geothermal projects. The project includes a comprehens ive research program, involving the installation of a wide range of instruments alongside an extensive logging and coring program and monitoring network. The doublet has been cored, with substantial continuous samples from the heterogeneous reservoir, alongside a large suite of well logs in both the reservoir and overlying geological units. Such investigation is rarely undertaken in geothermal projects. A fiber-optic cable will monitor the producer well all the way down to the reservoir section, at approximately 2300m depth, in the Lower Cretaceous Delft Sandstone that is used as a geothermal reservoir in a series of existing and planned doublets in the West Netherlands Basin. A local seismic monitoring network has been installed in the surrounding area with the aim of monitoring very low-magnitude natural or induced seismicity. A vertical observation well with electromagnetic sensors will be drilled in the near future between the injector and producer to monitor cold-front propagation. This paper presents the initial modeling for the project and steps towards the production of a digital twin. Two modeling examples in the paper will emp hasize current operational challenges relevant to the project.@en