Calibrating hydrological models without stream flow observations is still difficult, and the simultaneous, combined use of additional data, such as remotely sensed products, for calibration has not been exhaustively tested thus far. It is hypothesized that the combined use of products can improve model performances, internal model dynamics and the representation of hydrological signatures, in comparison with traditional calibration on stream flow.@en

Hydrological models are typically calibrated on available streamflow data or, more rarely on other hydrologic variables (i.e. soil moisture, groundwater dynamics, etc.). Whilst the literature is increasingly extensive on the value of different hydrologic variables in constraining model predictions, less attention has been given on how to define plausible parameter prior distributions or how much such priors impact the range of model behaviour before further conditioning. This can be relevant to the uncertainty bounds of any model prediction or in regard to the amount of sensitivity of the model parameters to the chosen model outputs. In this study, we combine four different conceptual hydrological models (HYPE, HYMOD, TUW, FLEX) with Global Sensitivity Analysis techniques to explore what are the most influential parameters and how the parameter priors impact model predictions. Our analysis focuses on 27 catchments across Europe, capturing a wide range of climates, vegetation and landscapes typologies in order to explore the effects of these physical and climatic properties on parameter prior distributions. Our findings provide new insights in the value of different sources of information for constraining hydrological model inputs, and for predicting water resource conditions in catchments worldwide. @en

The calibration of a hydrological model still depends on the availability of streamflow data, even though more additional sources of information (i.e. remote sensed data products) have become more widely available. In this research, the model parameters of four different conceptual hydrological models (HYPE, HYMOD, TUW, FLEX) were constrained with remotely sensed products. The models were applied over 27 catchments across Europe to cover a wide range of climates, vegetation and landscapes. The fluxes and states of the models were correlated with the relevant products (e.g. MOD10A snow with modelled snow states), after which new a-posteriori parameter distributions were determined based on a weighting procedure using conditional probabilities. Briefly, each parameter was weighted with the coefficient of determination of the relevant regression between modelled states/fluxes and products. In this way, final feasible parameter sets were derived without the use of discharge time series. Initial results show that improvements in model performance, with regard to streamflow simulations, are obtained when the models are constrained with a set of remotely sensed products simultaneously. In addition, we present a more extensive analysis to assess a model’s ability to reproduce a set of hydrological signatures, such as rising limb density or peak distribution. Eventually, this research will enhance our understanding and recommendations in the use of remotely sensed products for constraining conceptual hydrological modelling and improving predictive capability, especially for data sparse regions. @en