Circular Image

R. Li

info

Please Note

2 records found

From biomechanics to recent sensor fusion methods and back

Review (2026) - Manon Kok, Ive Weygers, Hassan Osman, Daniel Weber, Ruiyuan Li, Thomas Seel, Ajay Seth
Inertial measurement units (IMUs) are a promising means to capture human motion, yet obtaining meaningful biomechanical quantities from IMU measurements remains non-trivial. This tutorial-style review focuses on kinematics and introduces four key aspects (inertial human motion capture objective, environmental conditions, subject & attributes, and motion characteristics) to determine how to translate biomechanical problems into adequate formulations for the fusion of inertial sensor measurements. We identify three fundamental challenges for kinematics estimation from IMUs: IMUs do not provide direct information about the joint angle, IMUs do not measure their own orientation, and real-world environments and dynamics compromise sensor reliability. Though there exist widely-used methods to overcome these challenges, they suffer from severe limitations in real-life applications, e.g., the need for sensor-to-segment calibration, and the fact that magnetic field disturbances degrade joint angle accuracy. The full potential for many use-cases hence remains untapped in terms of accuracy and reliability. We share insights into recently proposed methods, e.g., exploiting the human body's kinematic chain constraints, having the potential to overcome these limitations. We also present guiding questions related to the four key aspects and illustrate their use for navigating the methodological landscape for the use-case of lower-extremity joint angle estimation, for which we share open-access code and compare the traditional workflow with three alternatives. Our aim is to bridge the gap between the sensor fusion community developing methods for human motion capture and the biomechanics community in need of accurate, easy-to-use, and reliable methods to study human motion outside of the laboratory. ...
Journal article (2026) - Meng Yao, Ang Li, Zhilin Ran, Xiaoqing Dong, Ruiyan Xiang, Ting Chen, Gang Liu
Harmful algal blooms threaten drinking water safety. Although ultrafiltration can effectively retain algae cells and algal-derived pollutants, such as extracellular polymeric substances, it still faces challenges such as severe membrane fouling and insufficient contaminant removal. To address these issues, this study developed an integrated “membrane material–flocculant–magnetic regulation” process to enhance algae-laden water treatment and mitigate fouling. Nanoparticles of sulfonated polydopamine (SPDA)-modified Materials of Institute Lavoisier-101 (MIL-101), denoted SPDA@MIL-101, were utilized to functionalize a polyethersulfone (PES) ultrafiltration membrane, enhancing its hydrophilicity and negative surface charge. Meanwhile, a magnetic flocculant (PCNF), composed of polyferric sulfate (PFS), sodium carboxymethyl cellulose (CMC-Na), and iron(II,III) oxide (Fe₃O₄) nanoparticles, was synthesized. Under an external magnetic field, a combined coagulation–ultrafiltration process was employed to actively regulate the cake layer, forming a magnetically responsive cake layer with a graded structure of lower density at the bottom and higher density at the top. The SPDA@MIL-101/PES membrane exhibited significantly improved hydrophilicity, indicated by the reduced contact angle of 54.89°, as well as excellent removal efficiency toward algae-derived fluorescent organic matter. Guided by the magnetic field, the PCNF flocculant formed a loose and porous cake layer, leading to a membrane flux recovery rate of 89% and a reduction in irreversible fouling to 11%. Mechanistic analysis revealed that the magnetic field-mediated dynamic reconstruction of the cake layer optimized the pore network, simultaneously improving contaminant retention and flux recovery performance. This study provides a feasible strategy for the treatment of high-algae water by combining material innovation and process regulation. ...