There has been a long tradition in making ice structures, but the development of technical improvements for making ice buildings is a new field with just a handful of researchers. Most of the projects were realized by professors in cooperation with their students as part of their education in architecture and civil engineering. The following professors have realized ice projects in this setting: Heinz Isler realized some experiments since the 1950s; Tsutomu Kokawa created in the past three decades several ice domes in the north of Japan with a span up to 25 m; Lancelot Coar realized a number of fabric formed ice shell structures including fiberglass bars and hanging fabric as a mold for an ice shell in 2011 and in 2015 he produced an fabric-formed ice origami structure in cooperation with MIT (Caitlin Mueller) and VUB (Lars de Laet). Arno Pronk realized several ice projects such as the 2004 artificially cooled igloo, in 2014 and 2015 dome structures with an inflatable mold in Finland and in 2016–2019, an ice dome, several ice towers and a 3D printed gridshell of ice in Harbin (China) as a cooperation between the Universities of Eindhoven & Leuven (Pronk) and Harbin (Wu and Luo). In cooperation between the University of Alberta and Eindhoven two ice beams were realized during a workshop in 2020. In this paper we will present the motivation and learning experiences of students involved in learning-by-doing by realizing one large project in ice. The 2014–2016 projects were evaluated by Sanders and Overtoom; using questionnaires among the participants by mixed cultural teams under extreme conditions. By comparing the results in different situations and cultures we have found common rules for the success of those kinds of educational projects. In this paper we suggest that the synergy among students participating in one main project without a clear individual goal can be very large. The paper will present the success factors for projects to be perceived as a good learning experience.

@en

By using inflatable moulds and then spraying cellulose-water mixture, one ice dome and two ice towers were built in Harbin in December 2016. During the whole process, form-finding of the inflatable moulds as well as the construction of these ice composite shell structures are very important for the final results. The mould for the ice dome structure was a result of the manipulation of a synclastic membrane with a rope net. The mould for the ice tower structure consisted of some anticlastic surfaces. Form-finding of the inflatable moulds was conducted by the parametric tool “EasyForm” which is a self-programed plug-in in Grasshopper based on Vector Form Intrinsic Finite Element method. In a low-temperature work environment (-10 ℃ and below), the ice shell structures were constructed on the inflatable moulds. The cellulose-water mixture was sprayed in thin layers continuously and uniformly in order to make the surface of a shell of cellulose-reinforced ice. The construction process is introduced detailedly in this paper.@en

There has been a long tradition in making ice structures, but the development of technical improvements for making ice buildings is a new field with just a handful of researchers. Most of the projects were realized by professors in cooperation with their students as part of their education in architecture and civil engineering. The following professors have realized ice projects in this setting: Heinz Isler realized some experiments since the 1950s; Tsutomu Kokawa created in the past three decades several ice domes in the north of Japan with a span up to 25 meters; Lancelot Coar realized a number of fabric formed ice shell structures including fiberglass bars and hanging fabric as a mould for an ice shell in 2011 and in 2015 he produced an fabric-formed ice origami structure in cooperation with MIT (Caitlin Mueller) and VUB (Lars de Laet)[4]. Arno Pronk realized several ice projects such as the 2004 artificially cooled igloo, in 2014[1] and 2015[2] dome structures with an inflatable mould in Finland and in 2016 one ice dome and two ice towers in Harbin (China) as a cooperation between the Universities of Eindhoven & Leuven (Pronk) and Harbin (Wu and Luo). In this paper we will present the motivation and learning experiences of students involved in learning-by-doing by realizing one large project in ice. The 2014-2016 projects were evaluated by Sanders and Overtoom[3] using questionnaires among the participants by mixed cultural teams under extreme conditions. By comparing the results in different situations and cultures we have found common rules for the success of those kinds of educational projects. In this paper we suggest that the synergy among students participating in one main project without a clear individual goal can be very large. The paper will present the success factors for projects to be perceived as a good learning experience.@en