The development of high-power charging stations with fast chargers is a promising solution to shorten the charging time for electric vehicles (EVs). The neutral-point-clamped (NPC) converter-based bipolar-dc-bus-fed charging station brings many merits, but it has inherent voltage balance limits. To solve this issue, a voltage balance control (VBC) method based on a new modulation together with three-level (TL) dc-dc converter-based fast charger is proposed. Additionally, an effective VBC coordination between the TL dc-dc converter and the NPC converter is formulated. Through the proposed VBC coordination, the controllable balancing region is extended so that additional balancing circuits are eliminated. Meanwhile, the quality of the grid-side currents is improved as the NPC converter has more freedom to control currents. The low-frequency voltage fluctuations in dc buses are removed because the TL dc-dc converter performs most of the balancing tasks. Faster VBC perturbation performance is achieved due to higher available balancing current at TL dc-dc converter side. In addition, the voltage balance limits of both the TL dc-dc converter and the NPC converter are explored. The voltage balancing performances are compared when VBC is located at different sides. Simulation and experimental results are provided to verify the proposed VBC and the VBC coordination.

This paper presents a grid-connected seven-level cascaded H-bridge converter operating as photovoltaic inverter. The main issue with this topology are the natural power imbalances between the power cells and the phases of the converter. The control problem is addressed with a Multiobjective Finite Control Set Model Predictive Control, where a dc-link voltage balance among the cells and good tracking of the active and reactive power references injected to the grid are achieved. Furthermore, an average switching frequency control per cell has been included. The proposed control scheme is validated trough simulation results and tested under dynamic conditions.