Circular Image

Z. Guan

info

Please Note

15 records found

Journal article (2026) - Wei Huang, Zheng Guan, Michael A. Hicks
Characterisation of failure modes and their associated consequences is crucial for assessing the performance and reliability of embankments. Among the many factors influencing embankment stability, surcharge loads and soil spatial variability play significant roles in determining both the probability and the consequence of failure. In this work, a parametric study is conducted to investigate the effects of surcharge load length (e.g. as in rail traffic loading), distance from the load to the slope crest, and horizontal scale of fluctuation of soil strength variability on the failure behaviour of a 3D embankment, using the Random Finite Element Method. Five hundred realisations are generated for each stochastic scenario, for which the ultimate bearing capacity of the embankment is calculated under undrained conditions and the failure consequences are quantified in terms of failure volume and length. The results indicate that the surcharge load distribution and soil spatial variability jointly influence the system response. While the load-to-crest distance typically governs the dominating failure mode, the ratio between the horizontal scale of fluctuation and the load length governs the likelihood of localised failure. It is found that the most adverse scenario corresponding to the lowest mean bearing capacity is associated with relatively smaller failures. ...
Conference paper (2026) - Wei Huang, Michael A. Hicks, Zheng Guan
The Random Finite Element Method (RFEM) is used to calibrate the 2D strip load for the deterministic stability assessment of a railway embankment, considering the effects of 3D train loads and spatial variability of the soil undrained shear strength. 3D random fields are generated to simulate the soil strength variability using different scales of fluctuation in the horizontal plane, and finite element analyses are conducted as part of a Monte Carlo simulation. Each RFEM analysis comprises 500 realizations, from which the probability distribution of undrained bearing capacity is obtained. This allows the 2D design load and resistance to be calibrated against a target reliability level in light of 3D soil spatial variability and load distribution. The results highlight the importance of 3D reliability analysis for the assessment of railway embankments, and the proposed calibration approach provides a reliability-informed 2D solution with improved accuracy. ...
Journal article (2026) - Tianyang Lu, Yu Wang, Zheng Guan, Kostas Senetakis
As climate change alters global rainfall patterns, many regions are facing increased intensity and frequency of rainfall events. These changes pose significant risks to civil infrastructure, which was often designed based on historical data and may no longer be resilient. Rainfall-induced failures can lead to severe, life-threatening consequences. Local factors, such as topography and elevation, greatly influence rainfall variability, making site-specific projections essential for effective risk assessment of infrastructure. However, current rainfall projections from General Circulation Models (GCMs) have coarse spatial resolutions (e.g. 100 km), which are inadequate for assessing risks at specific sites, such as slopes near railways, where the relevant scale is often tens to hundreds of metres. This study proposes an innovative method that integrates historical rainfall records with GCM projections using a joint sparse representation (JSR) framework to project future rainfall patterns at specific sites. This approach combines regional trends from GCMs with local data to maintain regional consistency while accurately reflecting local characteristics. A temporal downscaling step further enhances the resolution for engineering applications. The method is demonstrated using real rain gauge data from Hong Kong. ...
Conference paper (2026) - Patricia Mares-Nasarre, Robert Lanzafame, Zheng Guan, Oswaldo Morales-Nápoles
Earth embankments (e.g., dams, dikes and levees) are critical components of flood defense systems, providing protection against riverine and coastal inundation. The integrity of these structures can be compromised by biotic factors such as burrowing activity from rodents, foxes, and other animals, whereby excavation of the burrows can negatively impact the structure by altering seepage paths and creating defects in the surface that lead to higher turbulence during overflow events and exacerbating pore pressure. Therefore, burrowing activity can contribute to failure of these structures through mechanisms such as slope instability or localized erosion. Despite being a recognized risk, incorporating the influence of animal burrows in the design phase is difficult because of two main reasons: (1) no standardized methodologies exist, to the authors’ knowledge, to translate burrow activity into engineering parameters (variables), and (2) numerical methods that could be used to perform a conventional geotechnical design require quantifiable parameters such as hydraulic conductivity, or geometry of discontinuities, which are typically unknown or impractical to measure in the field. In cases where animal burrows are present, these parameters are not easy to measure or predict due to their high variability and limited literature on the topic. In this study, Structured Expert Judgement using Cooke’s method is explored as a tool to quantify geotechnical parameters to incorporate burrowing activity in embankment design, focusing on the case of mole activity. The questionnaire includes calibration questions covering both the activity of moles during the mating season (quantified as density measured on the ground surface), and geotechnical parameters of soil. The questions of interest cover parameters necessary for assessing the influence of molehills on instability and overtopping erosion of embankments. The experts are asked to quantify those parameters without the presence of molehills and with a given density of molehills to allow comparison. ...
Journal article (2026) - Muhammet Durmaz, Zheng Guan, Michael A. Hicks
In geotechnical practice, the cone penetration test (CPT) is widely used for soil stratification; however, the large spacing between soundings makes it difficult to construct accurate two-dimensional (2D) subsurface cross-sections. Conventional Gaussian Process (GP) models are effective for spatial interpolation under stationary assumptions, but real CPT data often exhibit strong non-stationarity due to geological layering, limiting the applicability of GP-based models in practice. To address this limitation, this paper develops a Mixture of Gaussian Processes (MGP) framework for explicitly modeling the distinct spatial features of different soil layers. The MGP integrates layer-specific GPs with a probabilistic layer identification mechanism, enabling joint representation of stratigraphic boundaries and within-layer variability. The framework is validated using synthetic ground profiles of varying stratigraphic complexity and applied to real CPT data from the Groningen region of the Netherlands. Results show that the MGP generally improves prediction accuracy and uncertainty characterization relative to the GP, particularly in inclined or more complex stratigraphic settings where layer-dependent variability and boundary effects are important. ...
Journal article (2025) - Jun Cheng Yao, Yu Wang, Zheng Guan, Kostas Senetakis
In geotechnical site investigation, Robertson’s soil behavior type (SBT) chart is widely used for soil classification based on two quantities measured during a cone penetration test (CPT), the normalized cone resistance Qt and the normalized friction ratio FR. Qt and FR are negatively correlated and provide complementary information for soil classification. However, this cross-correlation between Qt and FR has not been explicitly modelled in previous studies of subsurface soil classification and stratification using an often-limited number of CPT soundings from a specific site. This study aims to leverage such cross-correlation for improving CPT-based stratification and zonation by a joint sparse representation of Qt and FR in a vertical cross-section, as well as quantifying their uncertainty under a Bayesian framework. In addition, direct application of the SBT chart to a vertical cross-section often leads to noisy results (e.g., SBTs fluctuate rapidly and unrealistically within short distances). The noises are subsequently removed mainly by subjective engineering judgment in current practices. In this study, a randomization of input measurements is proposed to filter out the noise and improve computational efficiency simultaneously. Both simulated and real data examples are used to illustrate the proposed method. The results indicate that the proposed method significantly improves accuracy of the soil classification and stratification and automatically removes the noise. ...
Journal article (2025) - Zheng Guan, Yu Wang, Kok-Kwang Phoon
To harness available generic geotechnical databases (i.e., the so-called big indirect data) as a supplement to sparse site-specific geotechnical data from a given site, it is crucial to first address the “site recognition challenge” (i.e., identification of sites similar to a target site from the generic database). Existing methods often quantify site similarity based solely on the multivariate distribution (or cross-correlations) of geotechnical properties, without accounting for similarity in spatial variation of geotechnical properties among different sites, potentially resulting in incomplete identification outcomes. To overcome this limitation, this study proposes a novel site recognition method for automatically identifying sites similar to a target site from a generic geotechnical database, based on similarity in spatial variation of geotechnical properties among different sites in a data-driven manner. In the proposed method, spatial variation basis modes of geotechnical properties for different sites are first extracted from existing geotechnical databases using machine learning methods. Then, geotechnical data from the target site is used to identify the site with similar spatial variation patterns from the databases using sparse representation and sparsity-promotion techniques. The effectiveness of the proposed method is demonstrated using a real geotechnical database (i.e., the ISSMGE TC304 database). ...
Journal article (2025) - Jiabao Xu, Yongtang Yu, Jianguo Zheng, Lulu Zhang, Zheng Guan, Yu Wang
Several global or regional databases for various types of soils have been developed due to their importance in engineering design and analysis. However, a database is not yet available for collapsible loess in which severe geohazards often occur. In this study, a comprehensive loess database with twelve soil parameters is compiled by collecting results of field and laboratory tests on collapsible loess from the city of Xi’an, China. Basic statistics, marginal probability distribution functions (PDFs), and a correlation matrix for loess parameters are estimated from the database. To the best of the authors’ knowledge, this is the first collapsible loess database at a municipal level. In addition, existing databases often lack sufficiently complete multivariate measurement data for a proper estimation of statistical correlations among multiple soil properties. In this study, this incomplete multivariate measurement data problem is tackled by Bayesian methods (i.e., Bayesian Gaussian mixture model and Bayesian compressive sampling (BCS) with Karhunen–Loève (KL) expansion, BCS-KL), which are illustrated and validated using the incomplete and complete subsets of the loess database, respectively. Both the Bayesian Gaussian mixture model and BCS-KL are non-parametric, and they offer a flexible way of modeling marginal PDFs and a correlation matrix from incomplete measurements in a realistic manner. ...
Journal article (2025) - Zheng Guan, Yu Wang, Kok-Kwang Phoon
Real geotechnical data from a typical site might be characterized as MUSIC-X (i.e., Multivariate, Uncertain, Unique, Sparse, Incomplete, and potentially Corrupted, with X denoting spatial/temporal variability). One of the key challenges in developing site-specific statistical models for multiple geotechnical properties (i.e., Multivariate) is missing (or Incomplete) values from different tests at various depths/locations. This raises a critical question in geotechnical site investigations: how to recover the missing values in real geotechnical datasets from available measurements by leveraging the underlying structure of geotechnical datasets? Since different geotechnical properties are not only correlated among different properties, but also auto-correlated across different depths, this suggests that a simple underlying structure with only a limited number of important features/patterns might exist for multivariate geotechnical datasets. Leveraging on this observation, this study proposes a novel, data-driven method for predicting missing values by low-rank matrix completion. The proposed method exploits the auto- and cross-correlation structures of different test data. Missing values are then recovered using a singular value thresholding algorithm, and a k-fold cross-validation strategy is employed to determine the level of measurement noise. The method is illustrated and validated using a real geotechnical dataset. The results indicate that the proposed method can provide reliable predictions. </jats:p> ...
Book (2025) - Yu Wang, Tengyuan Zhao, Yue Hu, Zheng Guan, Kok Kwang Phoon
Site characterization is indispensable to good geotechnical or rock engineering practice as every site is unique, but technical, budget, time, or access constraints typically result in only a tiny fraction of the underground soil and rock in a site being visually inspected, sampled, or tested. This leads to a long- lasting challenge of sparse measurements in geo- sciences and engineering. This book introduces Bayesian compressive sensing or sampling (BCS) as a highly efficient spatial data analytic and simulation method for the efficient modelling of spatial geo- data from sparse measurements, with quantified reliability and uncertainty to further optimize site characterization. It provides the necessary theory and computational tools for setting up and solving a sparse spatial data modeling problem using BCS. This book suits graduate students, academics, researchers, and engineers interested in site characterization from sparse measurements in geotechnical and rock engineering, and also those modeling other spatially varying phenomena such as air quality data, soil or water pollution data, and meteorological data. This is supplemented with a software called Analytics of Sparse Spatial Data using Bayesian compressive sampling/sensing and illustrative examples, and enables hands- on experience of spatial data analytics and simulation using sparse measurements. ...
Journal article (2024) - Zheng Guan, Yu Wang, Kok-Kwang Phoon
A profile of geotechnical properties is often needed for geotechnical design and analysis. However, site-specific data might be characterized as MUSIC-X (i.e., Multivariate, Uncertain and Unique, Sparse, Incomplete, and potentially Corrupted with “X” denoting the spatial/temporal variability), posing a significant challenge in accurately interpreting geotechnical property profiles. Different sources, or types, of data are commonly available from a specific site investigation program, and they are usually cross-correlated, and thus can provide complementary information. This leads to an important question in geotechnical site investigation: how to integrate multiple sources of sparse data for enhancing the profiling of different geotechnical properties. To address this issue, this study proposes a novel method, called fusion Bayesian compressive sampling (Fusion-BCS), for integrating sparse and non-co-located geotechnical data. In the proposed method, the auto- and cross-correlation structures of different sources of data are exploited in a data-driven manner through a joint sparse representation. Then, profiles of different geotechnical properties are jointly reconstructed from all measurements under a framework of compressive sampling/sensing. The proposed method is illustrated using simulated and real geotechnical data. The results indicate that the accuracy of the interpreted geotechnical property profiles may be significantly improved by integrating multiple sources of site investigation data. ...
Journal article (2024) - Zheng Guan, Yu Wang, Kok-Kwang Phoon
Due to time, budget, and/or technical constraints, geotechnical site investigation data from a specific site are often limited and sparse, leading to a long-lasting challenge in characterization of spatially varying geotechnical properties. During preliminary stages of site characterization, geotechnical data from neighboring sites or sites with similar geological conditions are often collected and used as valuable prior knowledge in geotechnical engineering practice. Nevertheless, existing methods for spatial variability characterization often rely solely on site-specific data and cannot effectively incorporate prior knowledge or existing databases. To address this issue, this study proposes a novel machine learning method that systematically combines sparsely measured data at a specific site with existing data from neighboring sites or sites with similar geological settings for characterization of property spatial variability in a data-driven manner. The proposed method starts with the construction of a dictionary that draws the dominant spatially varying patterns from a property measured at sites with similar geology under a dictionary learning framework. Leveraging the developed dictionary, the spatial variability of a property is interpreted from sparse site-specific measurements using Bayesian learning. The effectiveness of the proposed method is demonstrated using real data, and improved performance over existing methods is observed. ...
Journal article (2024) - Zheng Guan, Yu Wang
Although it is widely acknowledged that a three-dimensional (3D) model of geotechnical property variation is the cornerstone of underground digital twin, its adoption in practice remains limited, probably due to the scarcity of site-specific geotechnical data collected from site investigation. During a site investigation program, geophysical surveys are carried out sometimes, allowing for a rapid, nondestructive recognition of subsurface conditions over large areas. The abundant geophysical data obtained provides valuable complementary information for developing a reliable 3D geotechnical property model. However, no practical and rational method is available currently for a quantitative fusion of geotechnical and geophysical data in a 3D space. To tackle this challenge, this study develops an innovative 3D fusion method for efficiently integrating limited geotechnical data with high-resolution geophysical data in a 3D space. The auto- and cross-correlation of 3D geotechnical and geophysical data are exploited using joint sparse representation in the proposed method, enabling efficient exchange of information between geotechnical and geophysical data in a data-driven manner. The proposed method is demonstrated and validated using both synthetic and real-world datasets. A significant improvement is observed in the construction of 3D model of geotechnical properties after an integration of geotechnical and geophysical data. ...
Journal article (2023) - Zheng Guan, Yu Wang
Cross-correlated random fields are an essential tool for simultaneously modeling both auto- and cross-correlation structures of spatial or temporal quantities in stochastic analysis of structures or systems. Existing cross-correlated random field simulation methods often require explicit information about random field parameters as inputs. However, in engineering practice, site-specific measurements of different quantities are often limited, non-co-located and irregularly distributed within a given site because of time, budget, or space constraints as well as missing data. It is notoriously difficult to properly estimate reliable random field parameters from limited non-co-located measurements with an irregular spatial pattern, particularly the auto-correlation and cross-correlation structures of a two-dimensional (2D) cross-correlated random field. To deal with this issue, this study proposes a novel 2D cross-correlated random field generator for simulating 2D cross-correlated random field samples (RFSs) directly from sparsely measured non-co-located data points with unequal measurement intervals. Using a joint sparse representation, auto- and cross-correlation structures of different spatial/temporal quantities are exploited simultaneously from sparse measurements, followed by the generation of cross-correlated RFSs using Bayesian compressive sampling (BCS) and Markov chain Monte Carlo (MCMC) simulation in a data-driven manner. The proposed generator is demonstrated using 2D data of two correlated geotechnical properties. The results indicate that the RFSs generated using the proposed method from sparse measurements can properly characterize the spatial auto- and cross-correlation structures of different geotechnical properties. ...
Journal article (2022) - Zheng Guan, Yu Wang
In engineering practice, simplified procedure based on cone penetration test (CPT) results is widely used for evaluating soil liquefaction potential. Since the CPT-based simplified procedure was developed from observations during past earthquakes, it is semi-empirical and involves significant uncertainty (e.g., model uncertainty). In addition, due to time, budget and access constraints, CPTs are often sparsely conducted at a specific site, leading to a significant uncertainty associated with interpolation of the limited CPT soundings, particularly along horizontal direction. Furthermore, it is well-recognized that spatial variability of soil properties has a remarkable effect on soil liquefaction. All these variability and uncertainties greatly affect the seismic liquefaction assessment results, particularly spatial distribution of liquefiable soils in a site, and liquefaction-induced damage. This underscores a question of how to properly incorporate these variability and uncertainties in liquefaction assessment, e.g., how to characterize spatial distribution of soil liquefaction potential in a site with quantitative consideration of the abovementioned variability and uncertainty. To address this issue, this paper develops a novel probabilistic method for characterizing spatial distribution of soil liquefaction potential through factor of safety, FS against liquefaction in a vertical cross-section using Bayesian compressive sampling and Monte Carlo simulation. Using the proposed method, many random field samples of FS cross-section are obtained directly from limited CPT measurements. The proposed method is illustrated using both a simulated data example and a set of real CPT data from Christchurch, New Zealand. It is shown that the proposed method performs well and provides reasonable liquefaction assessment results. ...