While wild pollinators play a key role in global food production, their assessment is currently missing from the most commonly used environmental impact assessment method, Life Cycle Assessment (LCA). This is mainly due to constraints in data availability and compatibility with LCA inventories. To target this gap, relative pollinator abundance estimates were obtained with the use of a Delphi assessment, during which 25 experts, covering 16 nationalities and 45 countries of expertise, provided scores for low, typical, and high expected abundance associated with 24 land use categories. Based on these estimates, this study presents a set of globally generic characterization factors (CFs) that allows translating land use into relative impacts to wild pollinator abundance. The associated uncertainty of the CFs is presented along with an illustrative case to demonstrate the applicability in LCA studies. The CFs based on estimates that reached consensus during the Delphi assessment are recommended as readily applicable and allow key differences among land use types to be distinguished. The resulting CFs are proposed as the first step for incorporating pollinator impacts in LCA studies, exemplifying the use of expert elicitation methods as a useful tool to fill data gaps that constrain the characterization of key environmental impacts.@en

Ninety five percent of the construction and demolition waste is recycled in the Netherlands. Most of it is used for low value applications such as road base materials; the use of secondary material in buildings is still less than 3%7. In order to recover waste for higher value applications, enhancing selective demolition and waste management practices is of crucial importance. In this study Life Cycle Assessment and Life Cycle Costing of a demolition project in Almere was carried out to identify the environmental and financial hotspots in the selective demolition and waste management in the Dutch context. Results suggest that (1) the best practice selective demolition and (2) the substitution of virgin concrete aggregate with secondary aggregate processed by Advanced Dry Recovery (ADR) system, will lead to environmental and financial improvements compared to the business as usual practice. On the building level, the advantage is mainly due to connecting the demolition and the re-development projects, which maximizes local reuse of old building components in the new building. The key of success for selective demolition is pre-audit to identify and connect to the market for material reuse. This is a direction that BIM (building information modeling) technology can contribute. With regards to the ADR concrete aggregate manufacturing, it was found that the transport distance for aggregate supply was the largest contributor to the environmental impacts and costs. Therefore it is important to locate ADR facilities next to concrete manufactures and/or provide ADR service on- site. @en