A main focus of water managers with regard to micropollutants is the protection of aquatic ecology. However, micropollutants also have the potential to affect the production of clean drinking water. In this paper, we propose to consider the removal effort when assessing micro-pollutants with an ‘Effort Index’ (EI). Assessments using the EI show which micropollutants need more extensive monitoring or abatement because of their difficulty to be removed using low-effort water purification treatment techniques. For water containing mixtures of micro-pollutants, the averaged EI values can indicate overall water quality. Data on the removal by different purification treatment techniques are not necessarily available for all micropollutants. Therefore, a set of data-driven indicative removal rules is derived to quantify the relation between micropollutant properties and different drinking water treatment techniques. The indicative removal rules provide a rough indication of removability. As an illustration, the water quality of the river Rhine is evaluated between 2000 and 2018. The EI value shows that the Rhine contains increasingly more difficult-to-remove micropollutants. In total, 18 of those are labeled as particularly difficult-to-remove chemicals. These micropollutants are suggested as candidates for abatement to lower the required effort in drinking water production.

@en

Surface waters are widely used as drinking water sources and hence their quality needs to be continuously monitored. However, current routine monitoring programs are not comprehensive as they generally cover only a limited number of known pollutants and emerging contaminants. This study presents a risk-based approach combining suspect and non-target screening (NTS) to help extend the coverage of current monitoring schemes. In particular, the coverage of NTS was widened by combining three complementary separations modes: Reverse phase (RP), Hydrophilic interaction liquid chromatography (HILIC) and Mixed-mode chromatography (MMC). Suspect lists used were compiled from databases of relevant substances of very high concern (e.g., SVHCs) and the concentration of detected suspects was evaluated based on ionization efficiency prediction. Results show that suspect candidates can be prioritized based on their potential risk (i.e., hazard and exposure) by combining ionization efficiency-based concentration estimation, in vitro toxicity data or, if not available, structural alerts and QSAR.based toxicity predictions. The acquired information shows that NTS analyses have the potential to complement target analyses, allowing to update and adapt current monitoring programs, ultimately leading to improved monitoring of drinking water sources.

@en

With the growth in production and use of chemicals and the fact that many end up in the aquatic environment, there is an increasing need for advanced water treatment technologies that can remove chemicals of emerging concern (CECs) from water. The current lack of a homogenous approach for testing advanced water treatment technologies hampers the interpretation and evaluation of CEC removal efficiency data, and hinders informed decision making by stakeholders with regard to which treatment technology could satisfy their specific needs. Here a data evaluation framework is proposed to improve the use of current knowledge in the field of advanced water treatment technologies for drinking water and wastewater, consisting of a set of 9 relevance criteria and 51 reliability criteria. The two criteria sets underpin a thorough, unbiased and standardised method to select studies to evaluate and compare CEC removal efficiency of advanced water treatment technologies in a scientifically sound way. The relevance criteria set was applied to 244 papers on removal efficiency, of which only 20% fulfilled the criteria. The reliability criteria were applied to the remaining papers. In general these criteria were fulfilled with regards to information on the target compound, the water matrix and the treatment process conditions. However, there was a lack of information on data interpretation and statistics. In conclusion, a minority of the evaluated papers are suited for comparison across techniques, compounds and water matrixes. There is a clear need for more uniform reporting of water treatment studies for CEC removal. In the future this will benefit the selection of appropriate technologies.

@en

The water system provides many services to society; industries, municipalities and agriculture all withdraw, use and return water and demand a water quality fit for the intended purposes. Both global production of chemicals and global water withdrawal grow faster than human population. This implies increased chemical threats to water, and creates a strong driver for mitigation to protect human health, ecosystem integrity and ecosystem services. Here we connect the perspectives of the water cycle and the chemical life cycle and review possible mitigation options. We categorize mitigation options in various stages of the chemicals' life cycle, taking various sectors and environmental pathways into account. More technologically oriented versus other types of mitigation options are discerned, and their relevance on spatial and temporal scale is discussed. We review various water treatment techniques in relation to physical–chemical properties of chemicals. Finally we discuss how a mitigation database can be used to assess the effectiveness of interventions, by coupling them to regional or global hydrological models. A solution-focused and systems-oriented perspective combined with a mitigation database offers a common perspective amongst actors on the effects for water quality of possible mitigation options throughout the chemical's life cycle, in various sectors and at various places in the water system. This can stimulate coherent implementation of effective mitigation options, cross-sectoral learning and further innovations to improve water quality.@en

Water authorities and drinking water companies are challenged with the question if, where and how to abate contaminants of emerging concern in the urban water cycle. The most effective strategy under given conditions is often unclear to these stakeholders as it requires insight into several aspects of the contaminants such as sources, properties, and mitigation options. Furthermore the various parties in the urban water cycle are not always aware of each other's requirements and priorities. Processes to set priorities and come to agreements are lacking, hampering the articulation and implementation of possible solutions. To support decision makers with this task, a decision support systemwas developed to serve as a point of departure for getting the relevant stakeholders together and finding common ground. The decision support system was iteratively developed in stages. Stakeholders were interviewed and a decision support system prototype developed. Subsequently, this prototype was evaluated by the stakeholders and adjusted accordingly. The iterative process lead to a final system focused on the management of contaminants of emerging concern within the urban water cycle, from wastewater, surface water and groundwater to drinking water, that suggests mitigation methods beyond technical solutions. Possible wastewater and drinking water treatment techniques in combination with decentralised and nontechnical methods were taken into account in an integrated way. The system contains background information on contaminants of emerging concern such as physical/chemical characteristics, toxicity and legislative frameworks, water cycle entrance pathways and a database with associated possible mitigation methods. Monitoring data can be uploaded to assess environmental and human health risks in a specific water system. The developed system was received with great interest by potential users, and implemented in an international water cycle network. © @en