P

PA Hooijmeijer

27 records found

Cost reduction of GLARE components
Conference paper (2003) - PA Hooijmeijer (author)

Maintenance of GLARE structures and GLARE as riveted or bonded repair material

Fatigue and damage tolerance of GLARE

Development of FML grades with improved static properties
Report (2002) - PA Hooijmeijer (author)

Doubler run-out fatigue properties
Report (2002) - PA Hooijmeijer (author)

Fibre metal laminates: a state of the art

Auxiliary burn through tests on Glare, test results
Report (2002) - PA Hooijmeijer (author)

Effect of defects part 1: Splices with defects and multiple holes; fatigue and residual strength behaviour
Report (2002) - PA Hooijmeijer (author)

Thermal conductivity and specific heat of Glare
Report (2002) - PA Hooijmeijer (author)

Thermal conductivity and specific heat of Glare
Report (2002) - PA Hooijmeijer (author)

Glare 2 under small off-axis angles; final report
Report (2002) - PA Hooijmeijer (author)

Effects of defects, part 2 Shear loading of a splice with defects

Experimental project to assess the failure mechanisms during blunt notch of Glare under 45 degrees
Report (2002) - PA Hooijmeijer (author)

Influence of local corrosion on tensile and blunt notch strength of Glare
Report (2002) - PA Hooijmeijer (author)

Repair of fibre metal laminates.
Conference paper (2001) - PA Hooijmeijer (author), A Vlot (author)

Repair of joints, literature study. GTO SLI B01-06
Report (2001) - PA Hooijmeijer (author)

From Laboratory Material Development to Industrial application for Fibre Metal Laminates.

Blunt notch strength of GLARE at elevated test temperature.
Report (2001) - PA Hooijmeijer (author)

Qualification properties and design allowables. GTO SLI B00-60.

Burn-through and lighting strike
Conference paper (2001) - PA Hooijmeijer (author)