Balance control models are used to describe balance behavior in health and disease. We identified the unique contribution and relative importance of each parameter of a commonly used balance control model, the Independent Channel (IC) model, to identify which parameters are crucial to describe balance behavior. The balance behavior was expressed by transfer functions (TFs), representing the relationship between sensory perturbations and body sway as a function of frequency, in terms of amplitude (i.e., magnitude) and timing (i.e., phase). The model included an inverted pendulum controlled by a neuromuscular system, described by several parameters. Local sensitivity of each parameter was determined for both the magnitude and phase using partial derivatives. Both the intrinsic stiffness and proportional gain shape the magnitude at low frequencies (0.1–1 Hz). The derivative gain shapes the peak and slope of the magnitude between 0.5 and 0.9 Hz. The sensory weight influences the overall magnitude, and does not have any effect on the phase. The effect of the time delay becomes apparent in the phase above 0.6 Hz. The force feedback parameters and intrinsic stiffness have a small effect compared with the other parameters. All parameters shape the TF magnitude and phase and therefore play a role in the balance behavior. The sensory weight, time delay, derivative gain, and the proportional gain have a unique effect on the TFs, while the force feedback parameters and intrinsic stiffness contribute less. More insight in the unique contribution and relative importance of all parameters shows which parameters are crucial and critical to identify underlying differences in balance behavior between different patient groups.@en

The incidence of impaired balance control and falls increases with age and disease and has a significant impact on daily life. Detection of early-stage balance impairments is difficult as many intertwined mechanisms contribute to balance control. Current clinical balance tests are unable to quantify these underlying mechanisms, and it is therefore difficult to provide targeted interventions to prevent falling. System identification techniques in combination with external disturbances may provide a way to detect impairments of the underlying mechanisms. This is especially challenging when studying multi-joint coordination, i.e. the contribution of both the ankles and hips to balance control.

With model simulations we compared various existing non-parametric and parametric system identification techniques in combination with external disturbances and evaluated their performance. All methods are considered multi-segmental (both the ankles and the hips contribute to maintaining balance) closed-loop balance control. Validation of the techniques was based on the prediction of time series and frequency domain data. Parametric system identification could not be applied in a straightforward manner in human balance control due to assumed model structure and biological noise in the system. Although the time series were estimated reliably, the dynamics in the frequency domain were not correctly estimated. Non-parametric system identification techniques did estimate the underlying dynamics of balance control reliably in both time and frequency domain. The choice of the external disturbance signal is a trade-off between frequency resolution and measurement time and thus depends on the specific research question and the studied population.

With this overview of the applicability as well as the (dis)advantages of the various system identification techniques, we can work toward the application of system identification techniques in a clinical setting.@en