A computational framework is presented to numerically simulate the effects of antihypertensive drugs, in particular calcium channel blockers, on the mechanical response of arterial walls. A stretch-dependent smooth muscle model by Uhlmann and Balzani is modified to describe the interaction of pharmacological drugs and the inhibition of smooth muscle activation. The coupled deformation-diffusion problem is then solved using the finite element software FEDDLib and overlapping Schwarz preconditioners from the Trilinos package FROSch. These preconditioners include highly scalable parallel GDSW (generalized Dryja–Smith–Widlund) and RGDSW (reduced GDSW) preconditioners. Simulation results show the expected increase in the lumen diameter of an idealized artery due to the drug-induced reduction of smooth muscle contraction, as well as a decrease in the rate of arterial contraction in the presence of calcium channel blockers. Strong and weak parallel scalability of the resulting computational implementation are also analyzed.

@en

Monolithic fluid–structure interaction (FSI) of blood flow with arterial walls is considered, making use of sophisticated nonlinear wall models. These incorporate the effects of almost incompressibility as well as of the anisotropy caused by embedded collagen fibers. In the literature, relatively simple structural models such as Neo-Hooke are often considered for FSI with arterial walls. Such models lack, both, anisotropy and incompressibility. In this paper, numerical simulations of idealized heart beats in a curved benchmark geometry, using simple and sophisticated arterial wall models, are compared: we consider three different almost incompressible, anisotropic arterial wall models as a reference and, for comparison, a simple, isotropic Neo-Hooke model using four different parameter sets. The simulations show significant quantitative and qualitative differences in the stresses and displacements as well as the lumen cross sections. For the Neo-Hooke models, a significantly larger amplitude in the in- and outflow areas during the heart beat is observed, presumably due to the lack of fiber stiffening. For completeness, we also consider a linear elastic wall using 16 different parameter sets. However, using our benchmark setup, we were not successful in achieving good agreement with our nonlinear reference calculation.

@en

Multilevel extensions of overlapping Schwarz domain decomposition preconditioners of Generalized Dryja-Smith-Widlund (GDSW) type are considered in this paper. The original GDSW preconditioner is a two-level overlapping Schwarz domain decomposition preconditioner, which can be constructed algebraically from the fully assembled stiffness matrix. The FROSch software, which belongs to the ShyLU package of the Trilinos software library, provides parallel implementations of different variants of GDSW preconditioners. The coarse problem can limit the parallel scalability of two-level GDSW preconditioners. As a remedy, in the past, three-level GDSW approaches have been proposed, which can significantly extend the range of scalability. Here, a multilevel extension of the GDSW preconditioner is introduced and analyzed. Finally, parallel results for the implementation in FROSch for up to 40 000 cores of the SuperMUC-NG supercomputer at Leibniz Supercomputing Centre (LRZ) and to 48 000 cores of the JUWELS supercomputer at Jülich Supercomputing Centre (JSC) are presented.

@en

A new reduced-dimension adaptive generalized Dryja-Smith-Widlund (GDSW) overlapping Schwarz method for linear second-order elliptic problems in three dimensions is introduced. It is robust with respect to large contrasts of the coefficients of the partial differential equations. The condition number bound of the new method is shown to be independent of the coefficient contrast and only dependent on a user-prescribed tolerance. The interface of the nonoverlapping domain decomposition is partitioned into nonoverlapping patches. The new coarse space is obtained by selecting a few eigenvectors of certain local eigenproblems which are defined on these patches. These eigenmodes are energy-minimally extended to the interior of the nonoverlapping subdomains and added to the coarse space. By using a new interface decomposition, the reduced-dimension adaptive GDSW overlapping Schwarz method usually has a smaller coarse space than existing GDSW and adaptive GDSW domain decomposition methods. A robust condition number estimate is proven for the new reduced-dimension adaptive GDSW method which is also valid for existing adaptive GDSW methods. Numerical results for the equations of isotropic linear elasticity in three dimensions confirming the theoretical findings are presented.

@en

The Fast and Robust Overlapping Schwarz framework [7, 8], which is part of the Trilinos Software library [18], contains a parallel implementation of the generalized Dryja–Smith–Widlund (GDSW) preconditioner.

@en

The parallel performance of the three-level fast and robust overlapping Schwarz (FROSch) preconditioners is investigated for linear elasticity. The FROSch framework is part of the Trilinos software library and contains a parallel implementation of different preconditioners with energy minimizing coarse spaces of generalized Dryja--Smith--Widlund type. The three-level extension is constructed by a recursive application of the FROSch preconditioner to the coarse problem. In this paper, the additional steps in the implementation in order to apply the FROSch preconditioner recursively are described in detail. Furthermore, it is shown that no explicit geometric information is needed in the recursive application of the preconditioner. In particular, the rigid body modes, including the rotations, can be interpolated on the coarse level without additional geometric information. Parallel results for a three-dimensional linear elasticity problem obtained on the Theta supercomputer (Argonne Leadership Computing Facility, Argonne, IL) using up to 220 000 cores are discussed and compared to results obtained on the SuperMUC-NG supercomputer (Leibniz Supercomputing Centre, Garching, Germany). Notably, it can be observed that a hierarchical communication operation in FROSch related to the coarse operator starts to dominate the computing time on Theta, which has a dragonfly interconnect, for 100 000 message passing interface (MPI) ranks or more. The same operation, however, scales well and stays within the order of a second in all experiments performed on SuperMUC-NG, which uses a fat tree network. Using hybrid MPI/OpenMP parallelization, the onset of the MPI communication problem on Theta can be delayed. Further analysis of the performance of FROSch on large supercomputers with dragonfly interconnects will be necessary.@en

Different graph partitioning methods, i.e., linear partioning, parallel hypergraph (PHG) partioning, and two approaches using ParMETIS, are considered to generate an unstructured decomposition of the second-level coarse operator of three-level FROSch (Fast and Robust Overlapping Schwarz) preconditioners in the Trilinos software library. In our context, the parallel hypergraph method shows the most consistent results.

@en

This article describes a parallel implementation of a two-level overlapping Schwarz preconditioner with the GDSW (Generalized Dryja–Smith–Widlund) coarse space described in previous work [12, 10, 15] into the Trilinos framework; cf. [16]. The software is a significant improvement of a previous implementation [12]; see Sec. 4 for results on the improved performance.

@en

The GDSW (Generalized Dryja–Smith–Widlund) preconditioner is a two-level overlapping Schwarz domain decomposition preconditioner [23] with exact local solvers [5, 4].

@en

A robust two-level overlapping Schwarz method for scalar elliptic model problems with highly varying coefficient functions is introduced. While the convergence of standard coarse spaces may depend strongly on the contrast of the coefficient function, the condition number bound of the new method is independent of the coefficient function. Indeed, the condition number only depends on a user-prescribed tolerance. The coarse space is based on discrete harmonic extensions of vertex, edge, and face interface functions, which are computed from the solutions of corresponding local generalized edge and face eigenvalue problems. The local eigenvalue problems are of the size of the edges and faces of the decomposition, and the eigenvalue problems can be constructed solely from the local subdomain stiffness matrices and the fully assembled global stiffness matrix. The new AGDSW (adaptive generalized Dryja-Smith-Widlund) coarse space always contains the classical GDSW coarse space by construction of the generalized eigenvalue problems. Numerical results supporting the theory are presented for several model problems in three dimensions using structured as well as unstructured meshes and unstructured decompositions.

@en

Parallel computational results for problems in dislocation mechanics are presented using the deal.II adaptive finite element software and the Fast and Robust Overlapping Schwarz (FROSch) Preconditioner.@en

A three-level extension of the GDSW overlapping Schwarz preconditioner in two dimensions is presented, constructed by recursively applying the GDSW preconditioner to the coarse problem. Numerical results, obtained for a parallel implementation using the Trilinos software library, are presented for up to 90,000 cores of the JUQUEEN supercomputer. The superior weak parallel scalability of the three-level method is verified. For large problems and a large number of cores, the three-level method is faster by more than a factor of two, compared to the standard two-level method. The three-level method can also be expected to scale when the classical method will already be out-of-memory.

@en

We consider a recent overlapping Schwarz method with an energy-minimizing coarse space of reduced size. In numerical experiments for up to 64,000 cores, we show that the parallel efficiency and the total time to solution is improved significantly, compared to our previous overlapping Schwarz method using an alternative energy-minimizing coarse space.

@en

We propose robust coarse spaces for two-level overlapping Schwarz preconditioners, which are extensions of the energy minimizing coarse space known as GDSW (Generalized Dryja, Smith, Widlund). The resulting two-level methods with adaptive coarse spaces are robust for second order elliptic problems in two dimensions, even in presence of a highly heterogeneous coefficient function, and reduce to the standard GDSW algorithm if no additional coarse basis functions are used.

@en

Two-level overlapping Schwarz domain decomposition methods for second-order elliptic problems in two dimensions are proposed using coarse spaces constructed from the Approximate Component Mode Synthesis (ACMS) multiscale discretization approach. These coarse spaces are based on eigenvalue problems using Schur complements on subdomain edges. It is then shown that the convergence of the resulting preconditioned Krylov method can be controlled by a user-specified tolerance and thus can be made independent of heterogeneities in the coefficient of the partial differential equation. The relations of this new approach to other known adaptive coarse space approaches for overlapping Schwarz methods are also discussed. Compared to one of the competing adaptive approaches, the new coarse space can be significantly smaller. Compared to other competing approaches, the eigenvalue problems are significantly cheaper to solve, i.e., the dimension of the eigenvalue problems is minimal among the competing adaptive approaches under consideration. Our local eigenvalue problems can be solved using one iteration of LobPCG for essentially the same cost as a Cholesky-decomposition of a Schur complement on a subdomain edge.

@en

In this contribution, Fluid-Structure-Interaction (FSI) in blood vessels, in detail the simulation of realistic arterial geometries, where the interaction of the blood flow and the vessel wall is of special interest, is considered. Based on pervious research, cf. [1], our existing framework for FSI-simulations is extended towards realistic arterial geometries. The inflow and outflow boundary conditions for the fluid, as well as the boundary conditions for the structure are enhanced and adjusted to the chosen patient-specific geometry. In detail, an inflow profile for arbitrary shaped inflow cross-sections and a zero pressure boundary condition at the outflow are applied. Furthermore, the vessel wall is discretized using realistic material parameters of the media layer. The geometry and material parameters are adopted from [2]. In order to deal with the increasing complexity of the boundary value problem parallel computing and a two-level overlapping Schwarz method with energy-minimizing coarse space are applied; cf. [3]. The numerical simulations are performed using the Open-Source software LifeV, in particular a code which has been developed in cooperation with the group of Prof. Quarteroni from the EPF Lausanne.@en

In this contribution, results regarding fluid-structure interaction (FSI) simulations for three-dimensional arterial walls are presented. In detail, a benchmark problem for FSI simulations in arteries of sufficient complexity, which combines sophisticated nonlinear models for the fluid and the structure, cf. [1], as well as a short segment from a patient-specific arterial geometry are considered. For the patient-specific arterial geometry a specific inflow profile suited for realistic geometries and simplified boundary conditions for the outflow are taken into account. (© 2017 Wiley-VCH Verlag GmbH Co. KGaA, Weinheim)@en

Parallel results obtained with a new implementation of an overlapping Schwarz method using an energy minimizing coarse space are presented. We consider structured and unstructured domain decompositions for scalar elliptic and linear elasticity model problems in two dimensions. In particular, strong and weak parallel scalability studies for up to 1024 processor cores are presented for both types of problems. Additionally, weak scalability results for a three-dimensional linear elasticity model problem using up to 4096 processor cores are discussed. Finally, an application from fully-coupled fluid-structure interaction using a nonlinear hyperelastic material model for the structure is shown.

@en

Parallel overlapping Schwarz preconditioners are considered and applied to the structural block in monolithic fluid-structure interaction (FSI). The twolevel overlapping Schwarz method uses a coarse level based on energy minimizing functions. Linear elastic as well as nonlinear, anisotropic hyperelastic structural models are considered in an FSI problem of a pressure wave in a tube. Using our recent parallel implementation of a two-level overlapping Schwarz preconditioner based on the Trilinos library, the total computation time of our FSI benchmark problem was reduced by more than a factor of two compared to the algebraic onelevel overlapping Schwarz method used previously. Finally, also strong scalability for our FSI problem is shown for up to 512 processor cores.

@en

We describe a new implementation of a two-level overlapping Schwarz preconditioner with energy-minimizing coarse space (GDSW: generalized Dryja-Smith-Widlund) and show numerical results for an additive and a hybrid additive-multiplicative version. Our parallel implementation makes use of the Trilinos software library and provides a framework for parallel two-level Schwarz methods. We show parallel scalability for two- and three-dimensional scalar second-order elliptic and linear elasticity problems for several thousands of cores. We also discuss techniques for the parallel construction of coarse spaces which are also of interest for other parallel preconditioners and discretization methods using energy minimizing coarse functions. We finally show an application in monolithic fluid-structure interaction, where significant improvements are achieved compared to a standard algebraic, one-level overlapping Schwarz method.@en