This study characterises the effects of naturally varying organic content on the compression and shear behaviour of a marine silty-clay from the Netherlands. Index properties and mechanical properties are determined through laboratory tests, including oedometer and multistage loading-unloading triaxial stress paths. The results indicate a significant impact of the organic content on the compression response, with both the loading and reloading indexes increasing as the loss on ignition increases from 3% to 7%. Additionally, the study suggests a directional response of the compression behaviour, with the loading index increasing with the stress ratio. The influence of the organic content on shear strength appears to be less significant. No brittle response is observed during shearing, and a similar ultimate stress ratio is attained by all samples. However, a unique critical state line can only be identified for samples with similar organic content, as its intercept and slope are found to increase with increasing organic content. The experimental results from stress paths at constant stress ratio reveal an anisotropic pre-failure plastic deformation mode, which depends on the previous stress history and loading direction. This suggests that the stress–dilatancy relationship cannot be formulated as a unique function of the stress ratio. The high-quality experimental data presented in the study enlarge the database on soft organic soils in view of the development of advanced constitutive models.@en

A recent increase in frequency and severity of exceptional climatic events is of concern for the stability of natural and artificial slopes. These undergo continuous evaporation and infiltration cycles, which change the suction distribution and trigger shrinkage, swelling, cracking, and surfi-cial erosion, overall decreasing the soil strength. To assess the impact of these climatic stresses, the determination of water retention properties is a priority. Although advanced techniques have been proposed in the last few decades to this end, simpler commercially available techniques allow col-lecting data for a larger number of samples in a shorter time, thus enabling a basic description of the water retention properties for a larger database of soils. Data on two silty sands, coming from very different climatic environments in Europe, were collected with a combination of two simple commercial devices, and the results were modelled with a van Genuchten’s law. The fitted pa-rameters were found to correlate well with the amount of fines, irrespective of the different origin and composition of the two soils. Eventually, the limitation of the approach is discussed based on the results of cyclic drying–wetting tests.

@en

The behaviour of natural and artificial slopes is controlled by their thermo-hydro-mechanical conditions and by soil–vegetation–atmosphere interaction. Porewater pressure changes within a slope related to variable meteorological settings have been shown to be able to induce soil erosion, shrinkage–swelling and cracking, thus leading to an overall decrease of the available soil strength with depth and, ultimately, to a progressive slope collapse. In terms of numerical modelling, the stability analysis of partially saturated slopes is a complex problem and a wide range of approaches from simple limit equilibrium solutions to advanced numerical analyses have been proposed in the literature. The more advanced approaches, although more rigorous, require input data such as the soil water retention curve and the hydraulic conductivity function, which are difficult to obtain in some cases. The quantification of the effects of future climate scenarios represents an additional challenge in forecasting slope–atmosphere interaction processes. This paper presents a review of real and ideal case histories regarding the numerical analysis of natural and artificial slopes subjected to different types of climatic perturbations. The limits and benefits of the different numerical approaches adopted are discussed and some general modelling recommendations are addressed.@en