L. Zheng
Please Note
4 records found
1
This thesis asks how bio-inspired morphology can be designed, reconfigured, and coordinated as a functional resource for adaptive aerial robots, and how robotic models can test morphology–function hypotheses that are difficult to isolate in biological flight. Its central argument is that physical form can carry task-relevant functions and should therefore be designed jointly with actuation, planning, and feedback control. Robotic and computational models provide repeatable engineering evidence by prescribing selected morphological variables and measuring their consequences. They can also generate testable biological hypotheses, but aerodynamic sufficiency in a model is not proof of the mechanism or control strategy used by a living animal.
Chapter 2 provides a complementary morphology study through ALBERO, a framework for agile quadrotor perching on inclined branches. An actively triggered bistable gripper is combined with trajectory planning that regulates the vehicle state at contact. The large and small grippers close in 67 and 42 ms, respectively, and their geometry, compliance, and stored mechanical energy convert transient contact into robust grasping without continuous holding power. Indoor and outdoor experiments demonstrate attachment to inclined cylindrical targets and natural branches, establishing that attachment morphology and approach dynamics must be co-designed.
Chapters 3–5 form the principal gliding-mammal-inspired progression. Chapter 3 develops SquirrelDrone, a flying-squirrel-inspired robot whose compliant membrane is reshaped by actuated forelimbs, hindlimbs, and a tail. Wind-tunnel measurements distinguish passive membrane deformation from active whole-body morphing and relate configuration to aerodynamic stability, rotational moment authority, and translational force authority. Indoor and outdoor flight tests demonstrate coordinated use of propulsion and morphing. The results show that aerodynamic static stability, agility, and manoeuvrability can be reconfigured within one platform rather than remaining fixed properties of the original airframe.
Chapter 4 compares simplified gliding-mammal-inspired membrane and tail morphologies using computational fluid dynamics (CFD) techniques. A simulation framework isolates first-order effects of patagium membrane layout and tail integration, revealing task-dependent trade-offs among lift, drag, post-stall response, pitching moment, and lateral moments. Specifically, the integrated colugo-inspired tail membrane favours lift and longitudinal moment generation in the simulations, whereas the distinct flat-tail abstraction inspired by squirrels produces stronger lateral moments under asymmetric deflection. These comparisons identify geometric effects in rigid models, complementing the deformable robotic platforms.
Chapter 5 presents LemurGlider, a colugo-inspired membrane-wing glider drone used to study coordinated morphology at high angles of attack. Scheduling head orientation relative to the freestream reshapes the neck membrane, displaces separation downstream, and changes the effective pitching-moment response from destabilising to restoring along the tested schedule. Posterior actuation places zero-pitching-moment equilibria from 0° to 50°, while limb motions provide roll authority in representative attached- and separated-flow conditions. Reducing the prescribed wind-tunnel pitch-up duration from 4 to 0.3 s increases the maximum lift coefficient from 1.30 to 1.83, a 41% increase. At the respective lift maxima, the drag coefficient rises from 0.63 to 1.29. Free-flight terminal-braking experiments show a reduction in translational mechanical energy of 77.3% within 0.425 s. These experiments highlight key properties of morphing bodies: anterior flow regulation, posterior equilibrium placement, lateral morphing, and whole-body braking act as complementary functions.
Together, the studies show that morphology drives functionality in both contact mechanics and aerodynamic configuration. Moreover, morphing provides access to new design and control trade-offs rather than improving every performance metric simultaneously. The thesis also shows how physical robotic systems can isolate morphological effects that are difficult to study independently in gliding mammals. It contributes experimentally supported principles for morphology-driven aerial-robot design and body–control co-design, while motivating new investigations of gliding-mammal flight. The evidence from three robotic prototypes and one comparative computational study supports engineering design principles and identifies specific mechanisms for future biological investigation. ...
This thesis asks how bio-inspired morphology can be designed, reconfigured, and coordinated as a functional resource for adaptive aerial robots, and how robotic models can test morphology–function hypotheses that are difficult to isolate in biological flight. Its central argument is that physical form can carry task-relevant functions and should therefore be designed jointly with actuation, planning, and feedback control. Robotic and computational models provide repeatable engineering evidence by prescribing selected morphological variables and measuring their consequences. They can also generate testable biological hypotheses, but aerodynamic sufficiency in a model is not proof of the mechanism or control strategy used by a living animal.
Chapter 2 provides a complementary morphology study through ALBERO, a framework for agile quadrotor perching on inclined branches. An actively triggered bistable gripper is combined with trajectory planning that regulates the vehicle state at contact. The large and small grippers close in 67 and 42 ms, respectively, and their geometry, compliance, and stored mechanical energy convert transient contact into robust grasping without continuous holding power. Indoor and outdoor experiments demonstrate attachment to inclined cylindrical targets and natural branches, establishing that attachment morphology and approach dynamics must be co-designed.
Chapters 3–5 form the principal gliding-mammal-inspired progression. Chapter 3 develops SquirrelDrone, a flying-squirrel-inspired robot whose compliant membrane is reshaped by actuated forelimbs, hindlimbs, and a tail. Wind-tunnel measurements distinguish passive membrane deformation from active whole-body morphing and relate configuration to aerodynamic stability, rotational moment authority, and translational force authority. Indoor and outdoor flight tests demonstrate coordinated use of propulsion and morphing. The results show that aerodynamic static stability, agility, and manoeuvrability can be reconfigured within one platform rather than remaining fixed properties of the original airframe.
Chapter 4 compares simplified gliding-mammal-inspired membrane and tail morphologies using computational fluid dynamics (CFD) techniques. A simulation framework isolates first-order effects of patagium membrane layout and tail integration, revealing task-dependent trade-offs among lift, drag, post-stall response, pitching moment, and lateral moments. Specifically, the integrated colugo-inspired tail membrane favours lift and longitudinal moment generation in the simulations, whereas the distinct flat-tail abstraction inspired by squirrels produces stronger lateral moments under asymmetric deflection. These comparisons identify geometric effects in rigid models, complementing the deformable robotic platforms.
Chapter 5 presents LemurGlider, a colugo-inspired membrane-wing glider drone used to study coordinated morphology at high angles of attack. Scheduling head orientation relative to the freestream reshapes the neck membrane, displaces separation downstream, and changes the effective pitching-moment response from destabilising to restoring along the tested schedule. Posterior actuation places zero-pitching-moment equilibria from 0° to 50°, while limb motions provide roll authority in representative attached- and separated-flow conditions. Reducing the prescribed wind-tunnel pitch-up duration from 4 to 0.3 s increases the maximum lift coefficient from 1.30 to 1.83, a 41% increase. At the respective lift maxima, the drag coefficient rises from 0.63 to 1.29. Free-flight terminal-braking experiments show a reduction in translational mechanical energy of 77.3% within 0.425 s. These experiments highlight key properties of morphing bodies: anterior flow regulation, posterior equilibrium placement, lateral morphing, and whole-body braking act as complementary functions.
Together, the studies show that morphology drives functionality in both contact mechanics and aerodynamic configuration. Moreover, morphing provides access to new design and control trade-offs rather than improving every performance metric simultaneously. The thesis also shows how physical robotic systems can isolate morphological effects that are difficult to study independently in gliding mammals. It contributes experimentally supported principles for morphology-driven aerial-robot design and body–control co-design, while motivating new investigations of gliding-mammal flight. The evidence from three robotic prototypes and one comparative computational study supports engineering design principles and identifies specific mechanisms for future biological investigation.
ALBERO
Agile Landing on Branches for Environmental Robotics Operations
Drones have been increasingly used in various domains, including ecological monitoring in forests. However, the endurance and noise of drones have limited their deployment to short flight missions above canopies. To address these limitations, we introduce ALBERO: a framework comprising a mechanical solution and an optimal planner to realise agile quadrotor perching on tree branches of steep incline. The gripper features an ultra-fast active mechanism inspired by birds' claws that enables quadrotors to perch swiftly on randomly-oriented tree branches. By perching, the drone can preserve energy for extended periods of time, while silently gathering forest data in the canopy. The intrinsic properties of the gripper allow for extra flexibility in size, surface roughness and shape imperfections of natural perches, such as those found in the wild. The gripper also has good scalability properties and can be easily matched to different drones' sizes. The biggest advantage of this novel design lays in its ability to close reactively and ultra-fast (67ms) on the large gripper, 42ms on the small gripper), enabling the quadrotor to perform agile perching manoeuvres from different angles and at different approach speeds. ALBERO's software module comprises of a trajectory planning algorithm adapted for branch perching, ensuring that the drone can perch on inclined cylindrical targets from any starting location in the proximity of the branch. These requirements translate in stringent positioning and orientation accuracy, but they enable the drone to land dynamically from a variety of positions within the forest.
For a small low-cost Unmanned Aerial Vehicle (UAV), the accurate aerodynamics and flight dynamics characteristics wouldn't be obtained easily, and the control coupling is serious, so the robustness of its flight controller must be considered carefully. In order to solve the problem, a Lateral-Directional (Lat-Dir) flight control method based on Deep Reinforcement Learning (DRL) are proposed in this paper. Firstly, based on the nominal state, three control laws are designed: classical Proportional Integral Derivative (PID) control, Linear Quadratic Gaussian (LQG) control based on modern control theory, and Deep Reinforcement Learning (DRL) control based on Twin Delayed Deep Deterministic Policy Gradient (TD3) method. In order to solve the problem of incomprehensible physical meaning of neural network in DRL, a simplified control strategy network is derived based on the inspiration of PID controller. In order to solve the problem that the reward function of DRL is difficult to be determined, the weights of the optimal quadratic function designed by LQG method are adopted, and the weights of control output considering discretization is added also. Then, the three controller are applied to nominal flight state and deviation state respectively, and the numerical flight simulation is carried out. The results show that, in the nominal state, the performance of DRL is close to the LQG and better than the PID. In the deviation state, which the lateral and directional static stable derivatives are changed artificially from stable to neutral stable, the rise time and adjustment time of the DRL change slightly, while the LQG degrades seriously and appears instable, and it is proved that the proposed DRL control method has better performance robustness.