Despite the recent advances in artificial tissue and organ engineering, how to generate large size viable and functional complex organs still remains as a grand challenge for regenerative medicine. Three-dimensional bioprinting has demonstrated its advantages as one of the major methods in fabricating simple tissues, yet it still faces difficulties to generate vasculatures and preserve cell functions in complex organ production. Here, we overcome the limitations of conventional bioprinting systems by converting a six degree-of-freedom robotic arm into a bioprinter, therefore enables cell printing on 3D complex-shaped vascular scaffolds from all directions. We also developed an oil bath-based cell printing method to better preserve cell natural functions after printing. Together with a self-designed bioreactor and a repeated print-and-culture strategy, our bioprinting system is capable to generate vascularized, contractible, and long-term survived cardiac tissues. Such bioprinting strategy mimics the in vivo organ development process and presents a promising solution for in vitro fabrication of complex organs.

@en

We present a method for fabricating general models with multi-directional 3-D printing systems by printing different model regions along with different directions. The core of our method is a support-effective volume decomposition algorithm that minimizes the area of the regions with large overhangs. A beam-guided searching algorithm with manufacturing constraints determines the optimal volume decomposition, which is represented by a sequence of clipping planes. While current approaches require manually assembling separate components into a final model, our algorithm allows for directly printing the final model in a single pass. It can also be applied to models with loops and handles. A supplementary algorithm generates special supporting structures for models where supporting structures for large overhangs cannot be eliminated. We verify the effectiveness of our method using two hardware systems: a Cartesian-motion-based system and an angular-motion-based system. A variety of 3-D models have been successfully fabricated on these systems. Note to Practitioners - In conventional planar-layer-based 3-D printing systems, supporting structures need to be added at the bottom of large overhanging regions to prevent material collapse. Supporting structures used in single-material 3-D printing technologies have three major problems: being difficult to remove, introducing surface damage, and wasting material. This article introduces a method to improve 3-D printing by adding rotation during the manufacturing process. To keep the hardware system relatively inexpensive, the hardware, called a multi-directional 3-D printing system, only needs to provide unsynchronized rotations. In this system, models are subdivided into different regions, and then, the regions are printed in different directions. We develop a general volume decomposition algorithm for effectively reducing the area that needs supporting structures. When supporting structures cannot be eliminated, we provide a supplementary algorithm for generating supports compatible with multi-directional 3-D printing. Our method can speed up the process of 3-D printing by saving time in producing and removing supports.

@en

This letter tackles the problem of energy-efficient coverage path planning for exploring general surfaces by an autonomous vehicle. Efficient algorithms are developed to generate paths on freeform 3-D surfaces according to a special design pattern as height extremity aware Fermat spiral for this purpose. By using the exact boundary-sourced geodesic distances, the method for generating Fermat spiral paths is first introduced to cover a general surface. Then, heuristics for energy efficiency are incorporated to add peak points of a height field as sources for geodesic computation. The paths generated by our method can significantly reduce the cost caused by gravity. Physical experiments have been taken on different terrain surfaces to demonstrate the effectiveness of our approach.

@en

This paper presents a new method to fabricate 3D models on a robotic printing system equipped with multi-axis motion. Materials are accumulated inside the volume along curved tool-paths so that the need of supporting structures can be tremendously reduced - if not completely abandoned - on all models. Our strategy to tackle the challenge of tool-path planning for multi-axis 3D printing is to perform two successive decompositions, first volume-to-surfaces and then surfaces-to-curves. The volume-to-surfaces decomposition is achieved by optimizing a scalar field within the volume that represents the fabrication sequence. The field is constrained such that its isovalues represent curved layers that are supported from below, and present a convex surface affording for collision-free navigation of the printer head. After extracting all curved layers, the surfaces-to-curves decomposition covers them with tool-paths while taking into account constraints from the robotic printing system. Our method successfully generates tool-paths for 3D printing models with large overhangs and high-genus topology. We fabricated several challenging cases on our robotic platform to verify and demonstrate its capabilities.

@en

This article presents an easy, flexible and interactive tool for partitioning a 3D model, which is larger than a 3D printers working volume, into printable parts in an intuitive way. Our tool is based on the elegant partitioning optimization framework Chopper. Our tool aims at improving Chopper by providing users three easy-to-use interactive operations: no-go region painting, cutting plane specification and components reunion. With these operations, we show that (1) exhaustive search in the BSP tree-the most time-consuming step in Chopper-can be avoided, (2) more flexible geometric configurations can be provided, (3) users design intention is considered naturally and efficiently, and customized 3D partitioning results can be obtained. We test our tool on a wide range of 3D models and observe promising results. A preliminary user study also demonstrates its effectiveness and efficiency.

@en

This paper presents a 3-D printing system that uses a low-cost off-the-shelf consumer projector to fabricate large models. Compared with traditional digital light processing (DLP) 3-D printers using a single vertical carriage, the platform of our DLP 3-D printer using delta mechanism can also move horizontally in the plane. We show that this system can print 3-D models much larger than traditional DLP 3-D printers. The major challenge to realize 3-D printing of large models in our system comes from how to cover a planar polygonal domain by a minimum number of rectangles with fixed size, which is NP-hard. We propose a simple yet efficient approximation algorithm to solve this problem. The key idea is to segment a polygonal domain using its medial axis and afterward merge small parts in the segmentation. Given an arbitrary polygon Ω with n generators (i.e., line segments and reflex vertices in Ω), we show that the time complexity of our algorithm is O(n²log² n) and the number of output rectangles covering Ω is O(Kn), where K is an input-polygon-dependent constant. A physical prototype system is built and several large 3-D models with complex geometric structures have been printed as examples to demonstrate the effectiveness of our approach.@en

This paper presents a robotic system - RoboFDM that targets at printing 3D models without support-structures, which is considered as the major restriction to the flexibility of 3D printing. The hardware of RoboFDM consists of a robotic arm providing 6-DOF motion to the platform of material accumulation and an extruder forming molten filaments of polylactic acid (PLA). The fabrication of 3D models in this system follows the principle of fused decomposition modeling (FDM). Different from conventional FDM, an input model fabricated by RoboFDM is printed along different directions at different places. A new algorithm is developed to decompose models into support-free parts that can be printed one by one in a collision-free sequence. The printing directions of all parts are also determined during the computation of model decomposition. Experiments have been successfully taken on our RoboFDM system to print general freeform objects in a support-free manner.

@en

We present a delta DLP 3D printer with large size in this paper. Compared with traditional DLP 3D printers that use a low-cost off-the-shelf consumer projector and a single vertical carriage, the platform of our delta DLP 3D printer can also move horizontally in the plane. We show that this structure allows the printer to have a larger printing area than the projection area of a projector. Our system can print 3D models much larger than traditional DLP 3D printers. The
major challenge to realize delta 3D printing with large size comes from how to partition an arbitrary planar polygonal shape (possibly with holes or multiple disjoint polygons) into a minimum number of rectangles with xed size, which is
NP-hard. We propose a simple yet efcient approximation algorithm to solve this problem. The time complexity of our algorithm is O(n3 log n), where n is the number of edges in the polygonal shape. A physical prototype system is built and
several large 3D models with complex geometric structures have been printed as examples to demonstrate the effectiveness of our approach.@en