A solid fairing and a wire-mesh fairing consisting of very fine wires and pores are numerically and experimentally investigated for the mitigation of landing gear noise. A slightly modified LAGOON landing gear and two configurations, one equipped with a solid fairing and the other with a wire-mesh fairing, are numerically simulated using the Improved Delayed Detached-Eddy Simulation (IDDES) in combination with the Ffowcs Williams and Hawkings (FW-H) analogy. Instead of resolving the detailed flow features through the wire mesh, a recently proposed numerical model is used to represent the effect of the wire-mesh fairing. The simulated flow fields and the far-field noise spectra are validated against the experiments conducted in an anechoic wind tunnel. The superiority of the recently proposed wire-mesh model over a classical wire-mesh model in modelling both the aerodynamic and aeroacoustic effects of the wire mesh is demonstrated. Results also show that the dense wire-mesh fairing functions very similarly to the solid fairing and that significant noise can be reduced through the installation of a solid fairing or a wire-mesh fairing upstream of the landing gears. For the baseline landing gear, the torque link and the brakes are identified noise sources. With the aerodynamic penalty of a 50% increase in drag, both fairings mitigate the pressure fluctuation on the torque link and brakes, resulting in the reduction of surface noise sources. The noise directivity shows that a solid fairing or a dense wire-mesh fairing contributes to a noise reduction of 4-6 dB in all radial directions. The findings in this study pave the way for the low-noise design of aircraft landing gears.

@en

Distributed electric propulsion systems are an emerging technology with the potential of revolutionizing the design and performance of aircraft. When propellers are located in close proximity, they can be subjected to aerodynamic interactions, which affect the far-field noise. In this paper, we study an array of three co-rotating and adjacent propellers to describe both the aerodynamic and acoustic installation effects. A scale-resolving CFD simulation based on the Lattice-Boltzmann/Very-Large-Eddy-Simulation method is used to solve the flow field around the propellers. An acoustic analogy integral approach calculates the far-field noise. Findings show that the helical vortical structures, generated at the tip of each blade undergo a flow deformation at the location of interaction. This causes the loading of each blade to vary during the rotation. Consequently, the unsteady loading noise becomes a dominant noise generation mechanism, driving the noise levels and directivity. It is also shown that introducing a non-zero relative phase angle between the propellers results in a reduction of the unsteady thrust, leading to a mitigation of the unsteady-loading tonal components along the rotation axis. Additionally, the relative phase angle causes constructive/destructive acoustic interference, as demonstrated by analyzing the noise emitted simultaneously by the three propellers.@en