The manageability and resilience of critical infrastructures, such as power and water networks, is challenged by their increasing interdependence and interconnectivity. Power networks often experience cascading failures, i.e. blackouts, that have unprecedented economic and social impact. Al- though knowledge exists about how to control such complex non-linear phenomena within a single power network, little is known about how such failures can spread and coevolve in the water network when failing power components energize the water distribution infrastructure, i.e. pumps and valves. This paper studies such a scenario and specifically the impact of power cascading failures on shortages of water supply. A realistic exemplary of an interconnected power-to-water network is experimentally evaluated using a modular simulation approach. Power and waterflow dynamics are simulated separately by taking into account different maximum powerlines capacities and water demand requirements. Results showcase the strong dependency of urban water sup- ply systems on the reliability of power networks, with severe shortages of water supply being caused by failures originating indistant power lines, especially for heavily loaded power networks.@en

Water distribution networks (WDNs) are critical to provide safe, clean drinking water around the globe. However, they are susceptible to accidental or deliberate contamination, potentially resulting in poisoned water, many fatalities and large economic consequences. In order to protect against such intrusions, an efficient sensor network should be placed in a WDN. Finding the optimal placement for water quality sensors is a challenging problem. Several sensor placement strategies have been proposed, but the vast majority of these strategies rely on the assumption that the sensors are perfect. In this paper we provide evidence for the imperfection of water quality sensors, by conducting measurements in an operational environment. We investigate the imperfection of four types of water quality sensors being employed in actual WDNs for the purpose of contamination detection. We describe experiments conducted at the WaDi testbed, a realistic water distribution facility at the Singapore University of Technology and Design. Through these experiments we study the imperfection, sensitivity and degradation of the water quality sensors, under normal conditions (water flow without contaminants present) as well as under attack conditions. It is shown that several aspects of sensor imperfection do occur, including missing values, inexplicable jumps and drifting.

@en

Water Distribution Networks (WDNs) are often susceptible to either accidental or deliberate contamination which can lead to poisoned water, many fatalities and large economic consequences. In order to protect against these intrusions or attacks, an efficient sensor network with a limited number of sensors should be placed in a WDN. In this paper, we focus on optimal sensor placements by introducing two greedy-based algorithms in which the imperfection of sensors and multiple objectives can be taken into account. The algorithms were tested using a medium scale urban WDN. It is shown that our algorithms are able to find sensor placements in reasonable time and that its solutions are close to optimal. Furthermore, relaxing the often used assumption that sensors work perfectly results in different sensor placements than were found before, indicating the importance to take sensor imperfection into account when placing sensors.

@en