The mass-scale integration of electric vehicles into the power system is a key pillar of the European energy transition agenda. Yet, the extent to which such integration would represent a burden for the power system of each member country is still an unanswered question. This is mainly due to a lack of accurate and context-specific representations of aggregate mobility and charging patterns for large electric vehicle fleets. Here, we develop and validate against empirical data an open-source model that simulates such patterns at high (1-min) temporal resolution, based on easy-to-gather, openly accessible data. We hence apply the model – which we name RAMP-mobility – to 28 European countries, showing for the first time the existence of marked differences in mobility and charging patterns across those, due to a combination of weather and socio-economic factors. We hence quantify the impact that fully-electric car fleets would have on the demand to be met by each country's power system: an uncontrolled deployment of electric vehicles would increase peak demand in the range 35–51%, whilst a plausible share of adoption of smart charging strategies could limit the increase to 30–41%. On the contrary, plausible technology (battery density) and infrastructure (charging power) developments would not provide substantial benefits. Efforts for electric vehicles integration should hence primarily focus on mechanisms to support smart vehicle-to-grid interaction. The approach is applicable generally beyond Europe and can provide policy makers with quantitatively reliable insights about electric vehicles impact on the power system.@en

Thanks to their modularity and their capacity to adapt to different contexts, hybrid microgrids are a promising solution to decrease greenhouse gas emissions worldwide. To properly assess their impact in different settings at country or cross-country level, microgrids must be designed for each particular situation, which leads to computationally intractable problems. To tackle this issue, a methodology is proposed to create surrogate models using machine learning techniques and a database of microgrids. The selected regression model is based on Gaussian Processes and allows to drastically decrease the computation time relative to the optimal deployment of the technology. The results indicate that the proposed methodology can accurately predict key optimization variables for the design of the microgrid system. The regression models are especially well suited to estimate the net present cost and the levelized cost of electricity (R² = 0.99 and 0.98). Their accuracy is lower when predicting internal system variables such as installed capacities of PV and batteries (R² = 0.92 and 0.86). A least-cost path towards 100% electrification coverage for the Bolivian lowlands mid-size communities is finally computed, demonstrating the usability and computational efficiency of the proposed framework.

@en

The relevance of sector coupling is increasing when shifting from the current highly centralised and mainly fossil fuel-based energy system to a more decentralized and renewable energy system. Cross-sectoral linkages are already recognized as a cost-effective decarbonisation strategy that provides significant flexibility to the system. Modelling such cross-sectoral interconnections is thus highly relevant. In this work, these interactions are considered in a long-term perspective by uni-directional soft-linking of two models: JRC-EU-TIMES, a long term planning multisectoral model, and Dispa-SET, a unit commitment and optimal dispatch model covering multiple energy sectors such as power, heating & cooling, transportation etc. The impact of sector coupling in future Europe-wide energy systems with high shares of renewables is evaluated through five scenarios. Results show that the contributions of individual sectors are quite diverse. The transport sector provides the highest flexibility potential in terms of power curtailment, load shedding, congestion in the interconnection lines and resulting greenhouse gas emissions reduction. Nevertheless, allowing combinations of multiple flexibility options such as hydro for the long-term, electric vehicles and flexible thermal units for the short-term provides the best solution in terms of system adequacy, greenhouse gas emissions and operational costs.@en

For decades, electrification planning in the developing world has often focused on extending the national grid to increase electricity access. This article draws attention to the potential complementary role of decentralized alternatives – primarily micro-grids – to address universal electricity access targets. To this aim, we propose a methodology consisting of three steps to estimate the LCOE and to size micro-grids for large-scale geo-spatial electrification modelling. In the first step, stochastic load demand profiles are generated for a wide range of settlement archetypes using the open-source RAMP model. In the second step, stochastic optimization is carried by the open-source MicroGridsPy model for combinations of settlement size, load demand profiles and other important techno-economic parameters influencing the LCOE. In the third step, surrogate models are generated to automatically evaluate the LCOE using a multivariate regression of micro-grid optimization results as a function of influencing parameters defining each scenario instance. Our developments coupled to the OnSSET electrification tool reveal an important increase in the cost-competitiveness of micro-grids compared to previous analyses.@en

With pressing priorities in the development agenda, policy makers in developing countries are in the difficult situation of prioritizing policy actions. Limited government and utility budgets need cost effective solutions to bring the desired development benefits of electrification, health, education and food security among others. Energy access is a prerequisite for economic activity and for human development as interacts in synergy with other development needs. As rural electrification models usually focus on the supply of electricity solely, thermal energy needs, such as cooking and water heating remain unattended and satisfied by non-renewable energy fuels. To this aim, we explore optimal electrification solutions addressing two types of energy demands, electricity and thermal energy demands for cooking. Our model builds on a 3-step electrification methodology proposed by Peña et al. including electricity as a modern source of clean energy for cooking in rural communities. The total investments needed to build and operate the microgrids, including distribution costs, is 332 million USD. This is equivalent to 1129 USD/per inhabitant. This amount does not account however the health and environment benefits that e-cooking can bring to inhabitants in Bolivian low-lands.

@en

Hybrid microgrids represent a cost-effective and viable option to ensure access to energy in rural areas located far from the main grid. Nonetheless, the sizing of rural microgrids is complicated by the lack of models capable of accounting for the evolution of the energy demand over time, which is likely to occur in such contexts as a result of the modification of users' lifestyles. To tackle this issue, the present study aims at developing a novel, long-term optimisation model formulation, capable of accounting for load evolution and performing suitable investment decisions for capacity expansion along the time horizon. Multiple scenarios of load evolution are considered to evaluate the beneficial effects of this novel approach, through the coupling of the model with a tool for stochastic load profiles generation. The results show how this implementation brings lower Net Present Cost to the project and improved correspondence between actual electricity demand and microgrid sizing. Finally, a sensitivity analysis evaluates the robustness of the approach with respect to input data variability and the Loss of Load parameter.

@en

Coupling heat and electricity through power-to-heat (P2H) technologies is raising increasing attention. It allows, on the one hand, to substitute traditional heating technologies with highly-efficient heat pumps (HPs), while, on the other hand, exploiting cost-effective thermal storage options (TES) such as hot water tanks, ultimately increasing system flexibility and renewables penetration. Nonetheless, an accurate assessment of the benefits that may be ensured by a country-wide diffusion of P2H technologies is hindered by computational difficulties in representing large numbers of distributed HPs and TES systems within regionalor country-scale energy models. In this work, we simulate large numbers of individual HPs and TES systems and compute the realistic aggregate electricity consumption associated with those. Various relevant regulation logics are simulated, either thermostatically-controlled or aggregator-controlled. For the latter, we show that an equivalent virtual power plant (VPP) representation ensures sufficient accuracy for use in largescale energy models (NRMSE<10%). Finally, we evaluate the flexibility potential ensured by the different P2H configurations considered, by incorporating those into an open energy system optimisation model. We show that flexibility and decarbonisation benefits are achieved in all configurations, although they increase (up to -89.5 GWh/week of primary energy savings) with the degree of 'smartness' and PV-friendliness of P2H operation logics.

@en

Energy access projects in remote off-grid areas would benefit from the adoption of a multi-energy system perspective, addressing all energy needs – not only lighting and power appliances, but also water-heating and cooking – by means of a mix of energy vectors. However, multi-energy analyses in remote areas are hindered by a lack of models allowing for the generation of multi-energy load profiles based on interview-based information characterised by high uncertainty. This study proposes a novel open-source bottom-up stochastic model specifically conceived for the generation of multi-energy loads for systems located in remote areas. The model is tested and validated against data obtained from a real system, showing a very good approximation of measured profiles, with percentage errors consistently below 2% for all the selected indicators, and an improved accuracy compared to existing approaches. In particular, some innovative features – such as the possibility to define and modulate throughout the day appliances’ duty cycles – seem to be determinant in marking a difference with previous approaches. This might arguably be even more beneficial for case studies characterised by a larger penetration of appliances that are subject to complex and unpredictable duty cycle behaviour.@en

Countries around the world are preparing to give the last leap to accomplish a 100 % of rural energy access. Nonetheless, country-wide electrification planning requires the analysis of hundreds of un-electrified villages with different social, economical and geographical backgrounds. State-of-the-art planning models typically handle this computationally challenging task relying on highly-simplified technological characterizations, at the expense of a proper estimation of the cost-optimal potential of off-grid technologies, particularly micro-grids. In this paper, we propose a machine-learning method to improve such technological characterization while keeping the computational tractability of the problem under control. Firstly, field surveys from rural un-electrified villages in Bolivia are used as an input for a stochastic load generator model, creating several demand scenarios for a set of different village archetypes; secondly, renewable energy time series for representative locations of Bolivia are created using the NASA database. For each demand and renewables potential combination, a two-stage stochastic sizing model is adopted to obtain the corresponding cost-optimal micro-grid configuration. Finally, these data are used to train a Gaussian process regression with the levelized cost of energy (LCOE) as dependent variable and the daily average demand, renewable energy, and techno-economic characteristics of the components as independent variables. The results show that the trained algorithm is ultimately able to identify the LCOE of microgrids in given conditions, out of the training dataset, with satisfying accuracy and limited computational effort.@en

Efforts towards ensuring clean and affordable electricity for all have been progressing slowly in rural, off grid areas of developing countries. In this context, hybrid microgrids may offer reliable and potentially clean electricity for isolated locations. Nevertheless, the process of planning and operation of these systems faces several challenges, often due to the uncertainties related to the renewable resources and to the stochastic nature of electricity consumption in rural contexts. This paper tackles this problem and contributes to the literature in bridging the gap between field practices and two-stage stochastic modeling approaches by identifying an open-source modeling framework which is then applied to real local data. As reference case-study, we consider a microgrid built in 2015 in Bolivia. Overall, the optimal system results from a compromise between the Net Present Cost, the peak capacity installed and the flexibility (to balance variable generation). Different approaches to size isolated microgrids are tested, with the conclusion that methods accounting for the uncertainty in both demand and renewable generation may lead to a more robust configuration with little impacts on the final cost for the community.@en

Robust sizing of rural micro-grids is hindered by uncertainty associated with the expected load demand and its potential evolution over time. This study couples a stochastic load generation model with a two-stage stochastic micro-grid sizing model to take into account multiple probabilistic load scenarios within a single optimisation problem. As a result, the stochastic-optimal sizing of the system ensures an increased robustness to shocks in the expected load compared to a best-case (lowest-demand) sizing, though with a lower cost and better dispatch flexibility compared to a worst-case (highest-demand) sizing. What is more, allowing just a 1% unmet demand enables to significantly improve the cost-competitiveness and the renewables penetration as all the not supplied energy is located in a negligible fraction of the unlikeliest highest demand scenarios.@en

Energy policy often builds on insights gained from quantitative energy models and their underlying data. As climate change mitigation and economic concerns drive a sustained transformation of the energy sector, transparent and well-founded analyses are more important than ever. We assert that models and their associated data must be openly available to facilitate higher quality science, greater productivity through less duplicated effort, and a more effective science-policy boundary. There are also valid reasons why data and code are not open: ethical and security concerns, unwanted exposure, additional workload, and institutional or personal inertia. Overall, energy policy research ostensibly lags behind other fields in promoting more open and reproducible science. We take stock of the status quo and propose actionable steps forward for the energy research community to ensure that it can better engage with decision-makers and continues to deliver robust policy advice in a transparent and reproducible way.@en