Ultrasound Computer Tomography (USCT) medical imaging is a promising approach for early detection of breast cancer. At Karlsruhe Institute of Technology (KIT) a 3-D USCT system is developed. The region-of-interest (ROI) of 10 × 10 × 10 cm³ volume is surrounded by a aperture of 2014 semi-spherical positioned ultrasound transducers. Results from a first patient study reveals the requirement of a significantly increased ROI to cover bodily variations. Design considerations and simulations show a demand for circular transducers with a diameter of ca. 500 µm, increasing the opening angle of the transducers to ca. 60°. Piezofiber composite technology is predestinated to simply provide circular transducers of the required dimensions. Moreover, piezocomposites based on single PZT (lead zirconate titanate Pb[Zr_xTi_1-x]O₃) fibers enable a cost-effective and series-production alternative to currently used dice-and-fill composites. A transducer design is presented which utilizes individually arranged single piezoceramic fibers with 460 μm in diameter within piezocomposite discs. As a result, fibers are independently addressable as single transducer elements allowing for the desired transducer arrangement. The electrical performance of each piezoceramic fiber is determined proofing a strong dependence both of the coupling coefficient and the resonance frequency from the transducer thickness. In further processing, the piezocomposite discs are connected to printed circuits, integrated into a cylindrical housing, and backfilled with polyurethane. Ultrasound characteristics such as sound pressure and opening angle are evaluated quantitatively. The results show that the transducer opening angles lie in the expected range, that the desired center frequency is achieved and that the bandwidth could be preserved compared to former dice-and-fill transducers.

@en

At the Karlsruhe Institue of Technology (KIT), a 3D-Ultrasound Computer Tomography (3D-USCT) medical imaging system for early breast cancer detection is currently developed. With the next generation of 3D-USCT 2.5, the current region of interest (ROI) of 10 x 10 x 10 cm³ shall be increased to 20 x 20 x 20 cm³ to allow reliable imaging results also for bigger female breasts. Therefore, the opening angle (OA) of the future transducers should be increased to approx. 60 at 3 dB while other characteristics such as bandwidth (BW) and resonance frequency should be preserved or even improved. Based on Fraunhofer IKTS Piezofibre composites utilized for transducer production, an optimization is performed on piezoelectric sensor geometry and size, type and structure of matching and backing layer and interconnection technology of the several parts of the transducer@en