Background: Osteoarthritis is a highly prevalent disease affecting the hip and knee joint and is characterized by load-mediated pain and decreased quality of life. Dependent on involved joint, patients present antalgic movement compensations, aiming to decrease loading on the involved joint. However, the associated alterations in mechanical loading of the ipsi- and contra-lateral lower limb joints, are less documented. Here, we documented the biomechanical fingerprint of end-stage hip and knee osteoarthritis patients in terms of ipsilateral and contralateral hip and knee loading during walking and stair ambulation. Methods: Three-dimensional motion-analysis was performed in 20 hip, 18 knee osteoarthritis patients and 12 controls during level walking and stair ambulation. Joint contact forces were calculated using a standard musculoskeletal modelling workflow in Opensim. Involved and contralateral hip and knee joint loading was compared against healthy controls using independent t-tests (p < 0.05). Findings: Both hip and knee cohorts significantly decreased loading of the involved joint during gait and stair ambulation. Hip osteoarthritis patients presented no signs of ipsilateral knee nor contralateral leg overloading, during walking and stair ascending. However, knee osteoarthritis patients significantly increased loading at the ipsilateral hip, and contralateral hip and knee joints during stair ambulation compared to controls. Interpretation: The biomechanical fingerprint in knee and hip osteoarthritis patients confirmed antalgic movement strategies to unload the involved leg during gait. Only during stair ambulation in knee osteoarthritis patients, movement adaptations were confirmed that induced unbalanced intra- and inter-limb loading conditions, which are known risk factors for secondary osteoarthritis.

@en

Background The unipodal stance task is a clinical task that quantifies postural stability and alignment of the lower limb joints, while weight bearing on one leg. As persons with knee osteoarthritis (KOA) have poor postural and knee joint stability, objective assessment of this task might be useful. Objective To investigate the discriminant validity of three-dimensional joint kinematics and centre of mass displacement (COM) between healthy controls and persons with knee KOA, during unipodal stance using inertial sensors. Additionally, the reliability, agreement and construct validity are assessed to determine the reproducibility and accuracy of the discriminating parameters. Methods Twenty healthy controls and 19 persons with unilateral severe KOA were included. Five repetitions of the unipodal stance task were simultaneously recorded by an inertial sensor system and a camera-based system (gold standard). Statistical significant differences in kinematic waveforms between healthy controls and persons with severe knee KOA were determined using one-dimensional statistical parametric mapping (SPM1D). Results Persons with severe knee KOA had more lateral trunk lean towards the contralateral leg, more hip flexion throughout the performance of the unipodal stance task, more pelvic obliquity and COM displacement towards the contralateral side. However, for the latter two parameters the minimum detectable change was greater than the difference between healthy controls and persons with severe knee KOA. The construct validity was good (coefficient of multiple correlation 0.75, 0.83 respectively) and the root mean squared error (RMSE) was low (RMSE <1.5°) for the discriminant parameters. Conclusion Inertial sensor based movement analysis can discriminate between healthy controls and persons with severe knee KOA for lateral trunk lean and hip flexion, but unfortunately not for the knee angles. Further research is required to improve the reproducibility and accuracy of the inertial sensor measurements before they can be used to assess differences in tasks with a small range of motion.

@en

Background: Apart from biomechanical alterations in movement patterns, it is known that movement limitations in persons with knee osteoarthritis (PwKOA) are related to an individual's perception and belief regarding pain and disability. To gain more insights into the functional movement behaviour of PwKOA in a clinical setting, inertial sensor technology can be applied. This study first aims to evaluate the ability of inertial sensors to discriminate between healthy controls (HC) and PwKOA. Secondly, this study aims to determine the relationship between movement behaviour, pain-related factors and disability scores. Methods: Twelve HC and 19 PwKOA were included. Five repetitions of six functional movement tasks (walking, forward lunge, sideward lunge, ascent and descent stairs, single leg squat and sit-to-stand) were simultaneously recorded by the inertial sensor system and a camera-based motion analysis system. Statistically significant differences in angular waveforms of the trunk, pelvis and lower limb joints between HC and PwKOA were determined using one-dimensional statistical parametric mapping (SPM1D). The Knee injury and Osteoarthritis Outcome Score and TAMPA scale for Kinesiophobia were used to evaluate the relationship between discriminating joint motion, pain-related factors and disability using spearman's correlation coefficients. Results: PwKOA had significantly less trunk rotation, internal pelvis rotation and knee flexion ROM during walking. Additionally, the reduced knee flexion (i.e. at the end of the stance phase and swing phase) was related to increased level of perceived pain. During the sideward lunge, PwKOA had significantly less knee flexion, ankle plantarflexion and hip abduction. This decreased hip abduction (i.e. during stance) was related to higher fear of movement. Finally, PwKOA had significantly less knee flexion during the forward lunge, single leg squat and during ascent and descent stairs. No significant correlations were observed with disability. Conclusions: Inertial sensors were able to discriminate between movement characteristics of PwKOA and HC. Additionally, significant relationships were found between joint motion, perceived pain and fear of movement. Since inertial sensors can be used outside the laboratory setting, these results are promising as they indicate the ability to evaluate movement deviations. Further research is required to enable measurements of small movement deviations in clinically relevant tasks.

@en

Optimal tibial component fixation in total knee arthroplasty (TKA) requires maximal tibial bone coverage, optimized mediolateral cortical fit as well as component rotation. Failure to achieve an optimal fit may result in component subsidence and loosening in case of undersizing, or overhang with subsequent soft tissue impingement in case of overhang. To date there is no consensus on optimal tibial component shape, and significant variability exists among different design manufacturers. In this study" principal component analysis" was used as a statistical tool in order to determine the ideal tibia baseplate shape, based upon anthropometric CT-scan data defining an average proximal tibial shape and variations. Gender specificity was evaluated and differences in geometry depending on anatomic constitution (varus, neutral, valgus) were analyzed. The results from our study indicate that in the arthritic knee differences in proximal tibial morphology at the resection level were mainly attributed to size and not shape. This is true for both Caucasian men and women, and is independent from the anatomical constitution. @en