In this contribution, we describe a reconfigurable surface, designed in 130um SiGe technology, to realize a fully-electronic, planar chopper aiming at passive terahertz imaging applications. This surface consists of subwavelength metallic patches that are interconnected using FET-based varactors. By switching the bias voltage of the varactors between 0V and 1.2V, the reconfigurable surface can switch between a transmissive and opaque state, respectively. The expected transmissivity is simulated to be between 0.2 and 0.9 over a wide frequency band, from 250 GHz to 550 GHz. This chopping solution would enable a high degree of system integration for future passive terahertz cameras.

Photoconductive antennas (PCAs) are promising candidates for sensing and imaging applications. In recent years, our group has investigated their properties under pulsed laser illumination in transmission using a time-domain (TD) Norton equivalent circuit. Here, we extend this analysis to the link between a photoconductive source and a receiver introducing for the latter a second TD Norton equivalent circuit. We also evaluate the transfer function of a dispersive quasi-optical (QO) link. Specifically, a field correlation approach based on the high-frequency techniques is used to evaluate the spectral transfer function between two bow-tie-based PCAs, including the QO link. The detected currents in the receiving circuit are reconstructed using stroboscopic sampling of the modeled THz pulses, equivalent to what is actually performed by THz TD systems. Both the amplitude and the waveforms of these currents are evaluated. The QO link is then experimentally characterized to validate the proposed methodology. The comparison between the simulations and the measurements is excellent.

Drude's description of the response of low-temperature gallium arsenide to optical pulse excitation is used to evaluate the components of a time-domain Norton equivalent circuit of a photoconductive antenna (PCA) source. The saturation of the terahertz (THz) radiated power occurring at large optical excitation levels was previously associated by the scientific community to radiation and charge screening of the bias. With the present circuit, we are able to model accurately the measured saturation as only due to the EM feedback from the antenna to the bias. The predicted THz radiated power is shown to match very accurately the measurements when the circuit is combined with an accurate description of the experimental conditions and the modeling of the THz quasi-optical (QO) channel.

In this paper, we present a quasi-optical power distribution architecture based on the use of an integrated lens antenna that generates a uniform aperture field distribution. By using such distribution in combination with an integrated lens array, an efficient and scalable quasi-optical power distribution can be achieved at THz frequencies. The proposed architecture is based on a leaky-wave waveguide feed that illuminates an elliptical lens with a top-hat distribution. This method can distribute the power from one antenna to a 7-pixel lens array in a hexagonal configuration with a power coupling efficiency of nearly 60%. This scheme could be potentially used for the local oscillator power distribution in heterodyne THz arrays. A prototype at 450-615GHz has been developed and characterized, achieving an aperture efficiency higher than 80%.

State-of-the-art THz pulsed commercial systems operating over large bandwidth suffer from high dispersion or low radiation efficiency due to the poor coupling between the transmitter and receiver photoconductive antennas (PCAs). In this work, we present the fabrication and characterization of a leaky-lens PCA that has the potential to solve this problem. The presented PCA is based on a low-temperature grown gallium arsenide (LT-GaAs) membrane with a 1:15 bandwidth coverage (0.1-1.5 THz), where the frequency response is constant. In order to fabricate the PCA on an LT-GaAs membrane, a novel fabrication process is developed. This process is dramatically faster than previously used processes (∼1.5 h instead of ∼20 h). Furthermore, an experimental validation of the radiated power together with the comparison to a standard bow-tie-based PCA fabricated on the same LT-GaAs wafer is shown in this article. We show that the PCA source on the LT-GaAs membrane is more efficient due to the enhanced leaky wave radiation. The leaky-lens PCA stands out as a great candidate to improve the coupling efficiency in THz pulsed commercial systems, where the maximum laser power that can be used is limited by the dispersion in the optic fiber.

Large format focal plane arrays (FPAs) of dielectric lenses are promising candidates for wide field-of-view submillimeter imagers. In this work, we optimize the scanning gain of such imagers via shaping lens surfaces. We develop an optimization procedure using a field correlation technique between the fields generated by a reflector on the top of the lenses and those generated by the lens feeds. Based on this procedure, an FPA of quartz lens antennas combined with leaky-wave feeds is designed to efficiently illuminate the reflector, achieving a directivity of 50.5 dBi up to scanning 20.3°. The obtained scanning gain loss of 2.6 dB is much lower than that associated with the direct fields coming from the reflector (about 6 dB). The proposed FPA is validated by full-wave simulations with excellent agreement. We have fabricated and measured an example shaped quartz lens optimized for the scanning angle of 20.3° at 180 GHz. The comparison between the simulations and the measurements also shows excellent agreement.

This article presents the development of a focal plane array (FPA) for terahertz imaging applications with a near diffraction-limited resolution achieved through a very tight sampling of the focal plane. The antenna array is integrated with direct detectors in a 22-nm CMOS technology and operates from 200 to 600 GHz. The tight sampling of the focal plane is realized by using a combination of leaky-wave radiation and a dual-polarized connected array configuration that closely resembles a chessboard. By utilizing both the polarizations in the chessboard design, the number of array elements per unit area is effectively doubled. The geometry of the chessboard array was co-optimized together with that of a silicon elliptical lens to achieve both high aperture efficiency and beam overlap. Measurements in the WR2.2 band of a fabricated demonstrator showed that an aperture efficiency of −4.1 dB was realized at 400 GHz. The average gain roll-off between two diagonally adjacent array elements was measured to be −1.5 dB at 400 GHz. Compared to the reference configuration of an idealized, equivalently sampled hexagonal FPA, the improvement in gain at the edge of coverage yields 1.2 dB, which includes 1.9 dB of ohmic losses in the chessboard array. The agreement between measurements and simulations proved to be within 1 dB from 325 to 475 GHz.

The continuous advancements in the coverage and sensitivity of terahertz direct-detector imagers places increasing constraints on the test benches needed for characterization. Already, relative differences on the order of a few decibels are observed between simulated and measured performance in the state-of-the-art literature. This contribution elaborates on our experimental strategies to maximize the characterization accuracy and precision of terahertz direct-detection imagers using a broadband, over-the-air measurement procedure. As a demonstration, four elements within a dense detector array were characterized in the WR2.2 band. By optimizing the modulation frequency in the setup for minimal impact of low-frequency noise and interference, a measurement dynamic range up to 30 dB was achieved, including the path loss over 20 cm. The hardware-to-model agreement of the characterized array is below 1 dB between 325 and 450 GHz.