Flettner rotors are nowadays becoming a widespread solution for wind-assisted propulsion. To increase the fuel savings of the ship on which they are installed, multiple devices are typically used. However, in the performance estimate of these hybrid ships, it is currently assumed that Flettner rotors operate independently, regardless of the number of devices employed and their relative position on the ship's deck. The present investigation deals with a wind-tunnel experimental campaign aimed at understanding the aerodynamic interaction effects on the performance of two similar Flettner rotors. The study indicates that the aerodynamic performance of the two Flettner rotors is affected by their interaction, and, generally, this is most noticeable when the devices are set closer to each other and when they are aligned with the wind direction. It is demonstrated that, depending on the apparent wind direction, the layout of the Flettner rotors on the ship's deck has a remarked influence on the driving and heeling force coefficients of the entire rig. Lastly, the velocity ratio is found to play a key role in the determination of how the interaction affects the Flettner rotor aerodynamic performance.

The Flettner rotor is attracting increasing attention as a viable technology for wind-assisted ship propulsion. Nonetheless, the influence of the Reynolds number on the aerodynamic performance of rotating cylinders is still unclear and under debate. The present study deals with a series of wind-tunnel experiments on a large-scale Flettner rotor in which the forces and pressures acting on the cylinder were measured for Reynolds numbers as large as Re=1.0⋅10 ⁶ . The rotating cylinder used in the experimental campaign had a diameter of 1.0 m and span of 3.73 m. The results indicate that the lift coefficient is only affected by the Reynolds number in the critical flow region and below velocity ratio k=2.5. Conversely, in the velocity ratio range 1<k≤2.5, the drag coefficient is markedly influenced by the Reynolds number over the entire range of flow conditions analyzed. The power coefficient scales with the cube of the tangential velocity and it appears to be insensitive to the Reynolds number or whether the cylinder is spun in an air stream or in still air.

Experiments on a large-scale Flettner rotor were carried out in the boundary-layer test section of Politecnico di Milano wind tunnel. The rotating cylinder used in the experimental campaign (referred to as Delft Rotor) had a diameter of 1.0 m and span of 3.73 m. The Delft Rotor was equipped with two purpose-built force balances and two different systems to measure the pressure on the rotor’s outer skin. The goal of the experiments was to study the influence of different Reynolds numbers on the aerodynamic forces generated by the spinning cylinder. The highest Reynolds number achieved during the experiments was.