AL
A. Lissin
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
1 records found
1
Fabrication of self-rolling suspended microchannel resonator
Dry-released self-rolling approach
Suspended microchannel resonators (SMRs) enable fast and accurate mass measurements of micro- and nanoparticles in liquid. By confining the fluidic sample within a microchannel located in a vacuum environment, SMRs eliminate viscous damping to achieve high sensitivity. Because the minimum detectable mass is directly proportional to the resonator’s effective mass, reducing the structural mass is critical for analyzing smaller particles. This study presents a novel fabrication methodology for ultralight SMRs. A 93 nm thick CVD/ALD (SiNx/AlOx) nanomembrane is self-rolled into a tube with a 10.6 μm diameter and suspended over a 100 μm length. This CMOS-compatible approach bypasses traditional III-V materials and entirely eliminates capillary stiction failures by utilizing a PI-2610 sacrificial layer alongside an isotropic dry-etch release. The suspended microtubes were mechanically characterized in a custom vacuum chamber (2 × 10−5 mbar at 20°C) using laser Doppler vibrometry. Dynamically, the fabricated device operates as a rigid mass supported by fixed-guided suspension beams (5 μm long, 4 μm wide, 93 nm thick). Vibrometry revealed a fundamental eigenfrequency of 39.123 kHz with a mechanical quality factor of 1138. These results validate a highly scalable platform for 3D suspended structures, paving the way for future microfluidic integration and advanced nanoparticle detection.
...
Suspended microchannel resonators (SMRs) enable fast and accurate mass measurements of micro- and nanoparticles in liquid. By confining the fluidic sample within a microchannel located in a vacuum environment, SMRs eliminate viscous damping to achieve high sensitivity. Because the minimum detectable mass is directly proportional to the resonator’s effective mass, reducing the structural mass is critical for analyzing smaller particles. This study presents a novel fabrication methodology for ultralight SMRs. A 93 nm thick CVD/ALD (SiNx/AlOx) nanomembrane is self-rolled into a tube with a 10.6 μm diameter and suspended over a 100 μm length. This CMOS-compatible approach bypasses traditional III-V materials and entirely eliminates capillary stiction failures by utilizing a PI-2610 sacrificial layer alongside an isotropic dry-etch release. The suspended microtubes were mechanically characterized in a custom vacuum chamber (2 × 10−5 mbar at 20°C) using laser Doppler vibrometry. Dynamically, the fabricated device operates as a rigid mass supported by fixed-guided suspension beams (5 μm long, 4 μm wide, 93 nm thick). Vibrometry revealed a fundamental eigenfrequency of 39.123 kHz with a mechanical quality factor of 1138. These results validate a highly scalable platform for 3D suspended structures, paving the way for future microfluidic integration and advanced nanoparticle detection.