Switchable mirrors^1-3 made of thin films of the hydrides of yttrium (YH(x)), lanthanum (LaH(x)) or rare-earth metals exhibit spectacular changes in their optical properties as x is varied from 0 to 3. For example, α- YH(x<0.23) is a shiny, hexagonally close-packed metal, β-YH(2±δ) is a face-centred cubic metal with a blue tint in reflection and a small transparency window at red wavelengths, whereas hexagonally close-packed γ- YH(x>2.85) is a yellowish transparent semiconductor. Here we show that this concentration dependence of the optical properties, coupled with the high mobility of hydrogen in metals, offers the possibility of real-time visual observation of hydrogen migration in solids. We explore changes in the optical properties of yttrium films in which hydrogen diffuses laterally owing to a large concentration gradient. The optical transmission profiles along the length of the film vary in such a way as to show that the formation of the various hydride phases is diffusion-controlled. We can also induce electromigration of hydrogen, which diffuses towards the anode when a current flows through the film. Consequently, hydrogen in insulating YH(3-δ) behaves as a negative ion, in agreement with recent strong-electron-correlation theories^4,5. This ability to manipulate the hydrogen distribution (and thus the optical properties) electrically might be useful for practical applications of these switchable mirrors.

@en

A new method has been developed to synthesize compact yttriumtrihydride by making use of a thin film technique. For electrical measurements yttrium films of typically 500 nm thickness are covered under UHV conditions by a 5 nm thick palladium overlayer which consists of electrically disconnected islands. Loading of these films with hydrogen up to the trihydride phase can then be done ex-situ in a reasonably short time (around 20-40 h) by applying gas pressures of about 60 × 105 Pa. For a thicker Pd layer (above 20 nm) this time can be considerably shorter (t ∼ 125 s). The film morphology stays intact during the loading process although the film thickness increases by approximately 11% and the crystal structure changes from h.c.p. to f.c.c. and back to h.c.p. These samples are, therefore, very well suited for an investigation of the remarkable electrical and optical properties of trihydrides, as recently reported by Huiberts et al. (Nature, 380, 1996, 231). In this article we give evidence for the island structure of the palladium overlayer and make a comparison of a number of physical properties of yttrium and its related hydrides as thin films with literature values for the same material in bulk form. These properties include lattice parameters for the different hydride phases, electrical resistivity for yttrium and its dihydride and Hall coefficient for yttrium. The characteristics of the yttriumhydride thin films are very similar to those of bulk material. Furthermore, we performed concentration measurements and resistivity measurements during hydrogen loading. It is shown that the resistivity rises three orders of magnitude when yttrium is loaded up to the trihydride phase at 60 × 105 Pa.@en