Liquid Metal Embrittlement of Automotive Steels
Characterizing failure mechanisms during Resistance Spot Welding
G. Mahadevan (TU Delft - Mechanical Engineering)
M.J.M. Hermans – Promotor (TU Delft - Mechanical Engineering)
L.A.I. Kestens – Promotor (TU Delft - Mechanical Engineering, Universiteit Gent)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Advanced high-strength steels (AHSS), including twinning-induced plasticity (TWIP) steel, are widely used in the automotive industry to reduce weight and improve crash safety. However, resistance spot welding (RSW) of galvanised AHSS often leads to liquid metal embrittlement (LME) a failure mechanism caused by liquid zinc penetrating grain boundaries at elevated temperatures. This thesis investigates LME during RSW of galvanised TWIP steel using a combined experimental and modelling approach. A heterogeneous triple-stack weld geometry (TWIP over two DX54 sheets) was used to promote LME crack formation. Samples were welded across eight weld times (300 ms to 1700 ms) and eight hold times (5 ms to 355 ms), and characterised using scanning electron microscopy with energy-dispersive spectroscopy (SEMEDS), electron backscatter diffraction (EBSD), X-ray diffraction (XRD), and scanning transmission electron microscopy (STEMEDS). Finite element analysis (SORPAS) provided temperature and stress distributions during welding. This thesis takes a deeper look into all parts of the LME crack and the RSW process to study their effect on embrittlement. First, crack initiation is investigated: the results show that FeZn intermetallic phases form continuously at weld shoulder temperatures and suppress LME by preventing direct liquid zinc contact with grain boundaries. As weld time increases, these phases become thermo-dynamically unstable and break down, allowing liquid zinc to penetrate austenitic grain boundaries. Crack propagation is then studied through the effects of grain boundary misorientation and stress on the LME crack path as well as the effect of zinc diffusion at the crack tip with changing welding parameters. Finally, the effect of another RSW parameter, the hold time, on LME and crack formation is studied across the different regions of the weld cross-section.