Atmospheric pressure plasma enhances the mechanical properties of natural fibre-reinforced polyoxymethylene thermoplastic composites
W. Woigk (University of Applied Sciences and Arts Northwestern Switzerland)
S. Patranabish (TU Delft - Electrical Engineering, Mathematics and Computer Science)
J. Hao (Vrije Universiteit Brussel, Katholieke Universiteit Leuven, Bcomp Ltd.)
J. Rion (Swiss Federal Laboratories for Materials Science and Technology (Empa))
A. W. van Vuure (Katholieke Universiteit Leuven)
C. Dransfeld (TU Delft - Aerospace Engineering, University of Applied Sciences and Arts Northwestern Switzerland, Institute of Polymer Engineering)
D. Hegemann (Swiss Federal Laboratories for Materials Science and Technology (Empa))
C. A. Fuentes (Katholieke Universiteit Leuven, Luxembourg Institute of Science and Technology)
K. Masania (University of Applied Sciences and Arts Northwestern Switzerland, TU Delft - Aerospace Engineering, Institute of Polymer Engineering)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
The development of sustainable and high-performance composite materials necessitates effective strategies to improve compatibility between natural fibres (NFs) and circular thermoplastic matrices. We report atmospheric pressure (AP) plasma treatment as a scalable, interface-engineered approach to enhance the mechanical performance of unidirectional flax fibre (FF)-reinforced polyoxymethylene copolymer (coPOM) composites. FF fabrics were treated using diffuse coplanar surface barrier discharge plasma and processed into high fibre volume fraction (FVF ∼ 61%) composites via film stacking. Post-treatment surface analysis revealed removal of waxy species and increased oxygen-containing functional groups, reflected by an increased O/C ratio (from 0.48 to 0.74) and elevated total surface energy (from 29.4 to 41.8 mJ/m2). The wetting improved significantly, with spreading coefficient changing from − 3.9 mJ/m2 to positive values. At the coupon level, transverse tensile modulus and strength increased by ∼ 67 % and ∼ 23 %, and transverse compressive modulus and strength by ∼ 46 % and ∼ 43 %, respectively. Shear strength (∼ 23%) and in-plane shear moduli (∼ 31 %) were also enhanced. In contrast, longitudinal tensile strength decreased by ∼ 12% despite a 12% increase in longitudinal modulus, while failure-envelope analysis indicated an expanded inter-fibre failure domain. Together, the results highlight AP plasma treatment as a roll-to-roll-compatible route to significantly improve off-axis mechanical performance of NF/thermoplastic composites.