A Fabrication Route for Integrating a Crystalline Barium Titanate Film onto Compliant PDMS Membranes
N.D. Pittroff (TU Delft - Mechanical Engineering)
M.K. Ghatkesar – Mentor (TU Delft - Mechanical Engineering)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Neural implants are battery-powered electrical devices whose electrodes are placed on nerves in the brain and stimulate them via electrical signals. They are used to treat Parkinson’s disease and drug-resistant epilepsy, and they remain in the body for years. The electrodes sit on the brain, while the battery is sealed in a rigid housing placed in a pocket in the chest. Body tissue is soft and moves, therefore the rigid housing and the leads connecting it to the electrodes create a mechanical mismatch and can inflame the tissue and damage nearby cells. Furthermore, the finite battery life requires additional replacement surgery increasing infection risks and health care costs. A soft carrier would allow a smaller, leadless implant, with the stimulus produced at the nerve directly. Piezoelectric ceramics are a suitable option to create these implants, as a deformation of the ceramic produces an electrical signal. Pressure changes in the body can supply that deformation, enabling the implant to stimulate the nerves without an external power source. However, growing crystalline oxides require a single crystal substrate and harsh growing conditions that flexible substrates cannot provide, making them difficult to integrate. Flexible electronics are already addressing parts of this integration challenge using sacrificial substrates to grow piezoelectric oxides on and move them onto a flexible substrate after. However, joining the oxide and integrating it with the electrical connections so the stack stays intact and bonded to the substrate remains difficult. This thesis establishes a fabrication route for that stack. A gold electrode is transferred onto a flexible polydimethylsiloxane membrane, and a barium titanate film, covered with gold, is released from its growth wafer and transferred onto that electrode. The fabrication route was established by optimizing the pulsed-laser deposition of the thin films, adding support during release and transfer, and developing a stable method to transfer gold to the soft polymer.