Design and Fabrication of an Upconversion-Based Optical Platform for Cardiac NADH Fluorescence Excitation
Z. Wang (TU Delft - Mechanical Engineering)
M.W.E.M. Alfeld – Mentor (TU Delft - Mechanical Engineering)
C.M. Boutry – Mentor (TU Delft - Electrical Engineering, Mathematics and Computer Science)
F. Arroyo Cardoso – Mentor (TU Delft - Electrical Engineering, Mathematics and Computer Science)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Heart failure remains a major clinical challenge, creating a need for implantable sensing platforms capable of providing long-term information on cardiac metabolic state. In this thesis, an upconversion-based optical platform was developed toward myocardial NADH sensing, using near-infrared excitation, local wavelength conversion, spectral filtering, and backside photodetection. Rather than focusing on the individual optical components, the main aim of this work was to determine whether these elements could be integrated into a compatible microfabrication workflow.
The proposed device combines a silicon photodetector with front-side optical shielding, a SiO2/SiN Fabry–Pérot filter, an upconversion nanoparticle layer, and a flexible b-DCPU substrate protected by a SiN hard mask. The main fabrication challenge was the strong coupling between these materials and processes: steps required for one layer could introduce thermal, chemical, or mechanical limitations for another. The process sequence was therefore developed around maintaining detector integrity, optical functionality, and electrical accessibility throughout integration.
Several key process improvements were identified. The Fabry–Pérot filter could be reproduced using calibrated dielectric deposition and patterned using a CHF3/Ar etching condition with improved selectivity. UCNP deposition became more uniform when the solvent evaporation rate was reduced through humidity control and lower-temperature drying. For the flexible substrate, b-DCPU films with thicknesses within the target integration range were obtained by spin-coating optimization. Tensile testing gave a Young's modulus of approximately 3.37 MPa, and the required polymer thickness for the adopted tensile-rigidity criterion was estimated to be approximately 22.6 µm. To enable photolithography on the polymer, a SiN protection layer was introduced, although interrupted deposition with intermediate cooling was required to avoid thermal damage.
The complete front-side integration sequence was demonstrated on a process-validation detector, showing that the proposed multilayer fabrication strategy is feasible. However, several limitations remain, including incomplete control of UCNP layer thickness, reduced b-DCPU etching efficiency during prolonged plasma exposure, formation of a white post-etch residue, and partial delamination of the Mo light-blocking layer. In addition, the validation detector did not contain a fully opened optical transmission window and therefore did not represent a fully functional sensing device. Further work should focus on improving these remaining process steps and validating the complete optical and electrical sensing performance on a functional detector.