On-Chip Optothermal Actuation of an hBN Membrane for Photonic Optomechanical Sensing

Master Thesis (2026)
Author(s)

R. El Fawal (TU Delft - Mechanical Engineering)

Contributor(s)

G.J. Verbiest – Mentor (TU Delft - Mechanical Engineering)

M. Ebrahimipour – Mentor (TU Delft - Mechanical Engineering)

Faculty
Mechanical Engineering
More Info
expand_more
Publication Year
2026
Language
English
Graduation Date
20-08-2026
Awarding Institution
Delft University of Technology
Programme
Mechanical Engineering, High-Tech Engineering
Faculty
Mechanical Engineering
Page Views
46
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

This thesis investigates the feasibility of on-chip optothermal actuation of a suspended hexagonal boron nitride (hBN) membrane integrated with a silicon photonic ring resonator operating near 1550 nm. A partially transferred multilayer graphene flake is used as the absorbing transducer. The same continuous-wave laser is intensity-modulated to generate a periodic thermal load while simultaneously providing cavity-enhanced optical readout of membrane motion.

Theoretical modelling of the graphene/hBN heterostructure predicts bimorph deflections in the range of 0.1–20 nm under idealised assumptions. Experimentally, coherent spectral features are observed when the laser intensity is modulated at frequencies between 12 and 30 MHz. The coherent response exhibits a clear maximum near 14 MHz, coinciding with the independently measured thermomechanical resonance of the membrane. The frequency-dependent coherent response, together with its enhancement near the mechanical resonance, provides evidence of optothermally driven mechanical motion of the membrane.

As an additional quantitative analysis, the measured coherent response is converted to an estimated driven displacement using the optical transduction range established for the hBN thickness range. This gives a displacement on the order of a few picometres. The estimate is affected by uncertainties in the transduction calibration and by device-specific factors such as partial graphene–hBN contact, residual membrane tension, and thermal low-pass filtering.

The results demonstrate the feasibility of electrode-free optothermal actuation of an hBN membrane within an integrated silicon photonic platform. The observed resonance-centred coherent response establishes the primary proof of concept, while the quantitative displacement estimate provides a basis for identifying the parameters that should be improved in future device designs.

Files

License info not available