Assessing the Susceptibility of Existing Pipelines to Hydrogen Embrittlement

Conference paper (2021)

Authors

T. Boot Team Vera Popovich - Mechanical, Maritime and Materials Engineering
A.C. Riemslag Team Vera Popovich - Mechanical, Maritime and Materials Engineering
T.E. Reinton Team Vera Popovich - Mechanical, Maritime and Materials Engineering
Ping Liu IntecSea BV
C.L. Walters Ship Hydromechanics and Structures - Mechanical, Maritime and Materials Engineering
V. Popovich Team Vera Popovich - Mechanical, Maritime and Materials Engineering
Research Group
Team Vera Popovich (Mechanical, Maritime and Materials Engineering) (TU Delft)
Copyright: © 2021 T. Boot, A.C. Riemslag, T.E. Reinton, Ping Liu, C.L. Walters, V. Popovich
DOI: https://doi.org/10.1007/978-3-030-65261-6_65
More Info
expand_more

Published Date

2021

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Mechanical, Maritime and Materials Engineering

Department

Materials Science and Engineering

Research Group

Team Vera Popovich

Abstract

With fossil fuels being phased out and growing global interest in a hydrogen economy, there is demand for re-purposing existing pipelines for transportation of hydrogen gas. However, hydrogen embrittlement (HE) can limit pipeline steel’s performance. In this study, the effect of hydrogen on the mechanical properties of an X60 base metal (polygonal ferrite/pearlite) and its girth weld (acicular ferrite/pearlite) was measured with a novel slow strain rate tensile (SSRT) test in which hollow pipe-like specimens were internally pressurised with nitrogen and hydrogen gas from 0 to 100 bars. Results showed that exposure to H2 gas at 100 bars reduced the ductility of the base metal by up to 40% and the weld metal by 14%. Reduction in cross-sectional area (%RA) reduced by up to 28% in the base metal and 11% in the weld metal. Fracture surface analysis showed micro-void coalescence as well as quasi-cleavage fracture characteristic of HE. Susceptibility to HE was also observed in the form of secondary longitudinal and internal transverse cracks.

Files

Boot2021_Chapter_AssessingTheS... (pdf)
(pdf | 0.527 Mb)
- Embargo expired in 24-08-2021
Unknown license