Distributed FMCW Radar Localization Under Residual Phase Errors
F. Grootenboer (TU Delft - Electrical Engineering, Mathematics and Computer Science)
Alexander Yarovoy – Mentor (Microwave Sensing, Signals & Systems)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Combining spatially separated frequency-modulated continuous-wave (FMCW) radar nodes can improve angular resolution beyond that of a single module. Coherent use of this distributed aperture requires carrier-phase calibration as well as timing and frequency synchronization. This thesis evaluates the localization sensitivity of two independently clocked 77 GHz radar nodes forming two monostatic and two reciprocal bistatic apertures. A common processing framework compares Bartlett beamforming, independent FOCUSS, Block-FOCUSS, multi-task Bayesian compressive sensing (MT-BCS), and coherent FOCUSS, alongside coherent and non-coherent Cartesian backpropagation. The contribution is an estimator-specific assessment linking residual phase structure after synchronization to angular accuracy, source-count recovery, and relative-separation success. Controlled simulations distinguish intra-aperture manifold distortion, inter-aperture block rotations, and phase evolution within a coherent processing interval (CPI).
In the static-phase studies, MT-BCS gives the most consistent sparse close-pair performance without requiring a common carrier phase. Coherent processing produces finer ideal spatial responses but is more sensitive to calibration and baseline-dependent ambiguity. In single-target CPI tests with fixed waveform settings, peak-tracked coherent FOCUSS with a frozen reference retains angular root-mean-square error (RMSE) below 0.05° for all tested residual frequency offsets through 100 Hz. Strong random phase walks and incompatible target/reference Doppler readouts can degrade coherent estimates; accurate dominant-peak angles can coexist with incorrect source counts.
The main physical campaign uses a 25 cm radar baseline, nine target separations, and 72 frame-level cases. Some estimators recover relative spacing, but none achieves absolute-angle success: exactly two targets with both bearing errors within 2°. Later 14.03 and 19.5 cm baseline campaigns compare processing without compensation against a separate spherical reference. Reference compensation remains limited by geometric uncertainty, while scene-assisted correction is an in-sample diagnostic. A measurement-matched simulator reproduces selected range–Doppler structures but not the measured estimator rankings. Together, these results identify when residual phase permits useful distributed-aperture localization and why a narrow coherent response alone is insufficient evidence of accurate physical localization.