Fourier Series-Based Optimization of Gradient Index Lens Permittivity Profiles Within Manufacturing Limits
L.B. Besse (TU Delft - Aerospace Engineering, Microwave Sensing, Signals & Systems)
Y. Aslan (Microwave Sensing, Signals & Systems)
S. Patranabish (TU Delft - Aerospace Engineering, TU Delft - Electrical Engineering, Mathematics and Computer Science)
K. Masania (TU Delft - Aerospace Engineering)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
This paper presents a novel method to parametrize gradient index (GRIN) structures based on a Fourier series distribution of the refractive index, scaled to the achievable range imposed by the material and manufacturing process. To demonstrate the proposed approach, a spherically symmetric lens is optimized and compared to a typical Luneburg Lens profile. A computationally efficient ray tracing algorithm is combined with Particle Swarm Optimization (PSO). An open source library is used to generate a dielectric crystal based on triply periodic minimal surface (TPMS) structures with spatially varying fill fraction. The lenses were printed using fused filament fabrication (FFF), fitted with a metallic cap, and radar cross section (RCS) measurements were taken in the 26-40 GHz range. The optimized lens offered marginal RCS improvements over a Luneburg lens with a truncated profile.
Files
File under embargo until 11-02-2027