Design of RYSEN

An intrinsically safe and low-power three-dimensional overground body weight support

Journal article (2018)

Authors

M.C. Plooij Motekforce Link B.V., Biomechatronics & Human-Machine Control - Mechanical, Maritime and Materials Engineering
Urs Keller Swiss Federal Institute of Technology
Bram Sterke Motekforce Link B.V.
Salif Komi Swiss Federal Institute of Technology
H. Vallery Biomechatronics & Human-Machine Control - Mechanical, Maritime and Materials Engineering
Heike Vallery Biomechatronics & Human-Machine Control - Mechanical, Maritime and Materials Engineering
Joachim Von Zitzewitz Swiss Federal Institute of Technology
Research Group
Biomechatronics & Human-Machine Control (Mechanical, Maritime and Materials Engineering) (TU Delft)
Copyright: © 2018 M.C. Plooij, Urs Keller, Bram Sterke, Salif Komi, H. Vallery, Joachim Von Zitzewitz
DOI: https://doi.org/10.1109/LRA.2018.2812913
More Info
expand_more

Published Date

2018

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Mechanical, Maritime and Materials Engineering

Department

Biomechanical Engineering

Research Group

Biomechatronics & Human-Machine Control

Abstract

Body weight support (BWS) systems are widely used in gait research and rehabilitation. This letter introduces a new three-dimensional overground BWS system, called the RYSEN. The RYSEN is designed to be intrinsically safe and low power consuming, while still performing at least as well as existing BWS systems regarding human-robot interaction. These features are mainly achieved by decoupling degrees of freedom between motors: slow/high-torque motors for vertical motion and fast/low-torque motors for horizontal motion. This letter explains the design and evaluates its performance on power consumption and safety. Power consumption is expressed in terms of the sum of the positive mechanical output power of all motor axes. Safety is defined as the difference between the mechanical power available for horizontal and vertical movements and the mechanical power that is needed to perform its task. The results of the RYSEN are compared to the performance of three similar systems: a gantry, the FLOAT, and a classic cable robot. The results show that the RYSEN and a gantry consume approximately the same amount of power. The amount is approximately half the power consumed by the next-best system. For the safety, the gantry is taken as the benchmark, because of its perfect decoupling of directions. The RYSEN has a surplus of 268 W and 126 W for horizontal and vertical movements, respectively. This is significantly lower than the next-best system, which has a surplus of 1088 W and 1967 W, respectively

Files

RYSENmechanics_CR.pdf
(pdf | 0.818 Mb)
Unknown license