Ultrasound-enhanced adsorption of anionic and cationic dyes onto Azolla microphylla–derived green hydrochar as a low-cost and sustainable adsorbent

Journal Article (2026)
Author(s)

Wahyu Setiawan (Universitas Sriwijaya)

Siska Nuri Fadilah (Universitas Sriwijaya)

Subriyer Nasir (Universitas Sriwijaya)

Muhammad Said (Universitas Sriwijaya)

Muhammad Fauzul Imron (TU Delft - Civil Engineering & Geosciences, Universitas Airlangga)

Tri Pebrianti (Universitas Sriwijaya)

Putri Nurhafizah (Universitas Sriwijaya)

Fakhili Gulo (Universitas Sriwijaya)

Research Group
Sanitary Engineering
DOI related publication
https://doi.org/10.1016/j.biombioe.2026.109844 Final published version
More Info
expand_more
Publication Year
2026
Language
English
Research Group
Sanitary Engineering
Journal title
Biomass and Bioenergy
Volume number
217
Article number
109844
Page Views
54
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

Dye-contaminated wastewater requires efficient and sustainable treatment technologies. Herein, abundant Azolla microphylla biomass was converted into dried biomass (D-AM) and hydrochar (H-AM) evaluated as low-cost adsorbents for the ultrasound-enhanced removal of Congo red (CR) and methylene blue (MB). BET and CHNS/O analyses showed that hydrothermal carbonization (HTC) increased the surface area while decreasing the O/C ratio, indicating simultaneous modification of structure and surface chemistry. SEM-EDX further confirmed changes in surface morphology. FTIR after adsorption showed shifts of S=O and COO− bands for CR, whereas MB adsorption was associated with aromatic C=C and C–N bands. Adsorption kinetics were adequately described by the PFO and PSO models, while ultrasonication accelerated adsorption primarily by enhancing mass transfer. Both Langmuir and Freundlich models adequately described the adsorption behavior, with the preferred isotherm depending on the dye–adsorbent system and adsorption conditions. D-AM exhibited strong selectivity for MB with a maximum capacity of 411.52 mg g−1 under ultrasonication, while H-AM showed higher affinity for CR with a capacity of 116.27 mg g−1, demonstrating that HTC altered adsorption selectivity rather than universally increasing adsorption capacity. Thermodynamic analysis indicated that adsorption was predominantly governed by physisorption, although the thermodynamic behavior depended on the dye–adsorbent system and operating conditions. A preliminary production cost estimation indicated that D-AM could be produced at below 1 USD kg−1 under the projected maximum-loading operation, highlighting its economic potential. These findings demonstrate that simple HTC can tailor adsorption selectivity while maintaining low production costs, making A. microphylla-derived materials promising sustainable adsorbents for dye-contaminated wastewater.

Files

– Personal use only – Dutch Copyright Act (Article 25fa)
warning

File under embargo until 14-01-2027