Feasibility study of stabilizing soft soil in the Jianghan Plain using one-part alkali-activated materials developed by iron and steel slags

Journal Article (2026)
Author(s)

Xinkui Yang (Wuhan University of Technology)

Shaopeng Wu (Wuhan University of Technology)

Shi Xu (TU Delft - Civil Engineering & Geosciences, Wuhan University of Technology)

Jianlin Feng (Wuhan University of Technology)

Yu Song (Wuhan University of Technology)

Jinyi Wu (Wuhan University of Technology)

Dongyu Chen (Wuhan University of Technology)

Jingshuai An (Wuhan University of Technology)

Fusong Wang (Wuhan University of Technology, Beijing University of Technology)

Research Group
Materials and Environment
DOI related publication
https://doi.org/10.1016/j.jclepro.2026.149492 Final published version
More Info
expand_more
Publication Year
2026
Language
English
Research Group
Materials and Environment
Journal title
Journal of Cleaner Production
Volume number
578
Article number
149492
Page Views
9
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

The stabilization of soft soil subgrade is essential for infrastructure development in lacustrine regions; however, conventional cement stabilization faces challenges related to limited applicability and high carbon emissions. This study developed a one-part alkali-activated material (OPAAM) using alkali-fused steel slag (AFSS) and granulated blast furnace slag (GBFS) for stabilizing soft soil from the Jianghan Plain, China. Response surface methodology, multi-objective particle swarm optimization, and entropy-weighted TOPSIS were used to optimize strength, workability, CO2eq, and cost. The optimized OPAAM was prepared with a precursor blend containing 29.0 wt% AFSS and 71.0 wt% GBFS, with sodium silicate and borax externally added at 9.1 wt% and 3.4 wt%, respectively, based on the total precursor mass. At this proportion, OPAAM reduces CO2eq by 82% compared with cement. Soft soil stabilized with 16 wt% OPAAM achieved a 28 d compressive strength of 3.9 MPa, exceeding that of the 20 wt% cement-stabilized control, while reducing CO2eq and cost by 85.6% and 17.6%, respectively. Microstructural analyses showed that C-(N-)A-S-H gel and hydrotalcite were the main hydration products of OPAAM, which filled pores and bound soft soil particles and served as the primary source of strength in the stabilized soft soil. Heavy metals leaching concentrations of OPAAM stabilized soft soil remain far below regulatory limits, confirming its environmental safety. This study provides theoretical and practical insights into the production and application of low-carbon soft soil stabilizers.

Files

– Personal use only – Dutch Copyright Act (Article 25fa)
warning

File under embargo until 29-03-2027