Climate change and human activity threaten sea turtle nesting beaches through increased flooding and erosion. Understanding the environmental characteristics that enable nesting can aid to preserve and expand these habitats. While numerous local studies exist, a comprehensive global analysis of environmental influences on the distribution of sea turtle nesting habitats remains largely unexplored. Here, we relate the distribution of global sea turtle nesting to 22 coastal indicators, spanning hydrodynamic, atmospheric, geophysical, habitat, and human processes. Using state-of-the-art global datasets and a novel 50-km-resolution hexagonal coastline grid (Coastgons), we employ machine learning to identify spatially homogeneous patterns in the indicators and correlate these to the occurrence of nesting grounds. Our findings suggest sea surface temperature, tidal range, extreme surges, and proximity to coral and seagrass habitats significantly influence global nesting distribution. Low tidal ranges and low extreme surges appear to be particularly favorable for individual species, likely due to reduced nest flooding. Other indicators, previously reported as influential (e.g., precipitation and wind speed), were not as important in our global-scale analysis. Finally, we identify new, potentially suitable nesting regions for each species. On average, 23 % of global coastal regions between - 39 ^∘ and 48 ^∘ latitude could be suitable for nesting, while only 7 % is currently used by turtles, showing that the realized niche is significantly smaller than the fundamental niche, and that there is potential for sea turtles to expand their nesting habitat. Our results help identify suitable nesting conditions, quantify potential hazards to global nesting habitats, and lay a foundation for nature-based solutions to preserve and potentially expand these habitats.

@en

At a global scale, deltas are vital economic hubs, in part due to the combination of their access to inland regions via river systems with their proximity to sea. However, with the sea in close vicinity also comes the threat of freshwater contamination by saline seawater, especially during droughts. This study explores the potential of a mitigation measure to estuarine salt intrusion, namely the construction of a (temporary) earthen sill—a measure implemented in the Lower Mississippi River near New Orleans (LA, USA). This study suggests design guidelines on how a sill can be used to mitigate estuarine salt intrusion: the design should focus on the longitudinal placement and the height of the sill, and the mitigating efficiency of the sill reduces with increasing tidal range. Overall, a (temporary) sill has great potential to reduce salt intrusion in salt wedge estuaries if there is sufficient water depth available.

@en

Coastal flood risk is expected to increase due to climate change and population
growth. Much of our coastlines is protected by “grey” infrastructure such as a dike.
Dike maintenance and strengthening requires ever increasing capital and space,
putting their economic viability in question. To combat this trend, more
sustainable alternatives are explored, also known as Nature based Solutions. A
promising option has shown to be tidal marshes. Tidal marshes are coastal
wetlands with high ecological and economic value. Also, they protect dikes
through wave attenuation and in case of a dike breach reduce its development.
However, the effectiveness of a tidal marsh on reducing dike breach development
rates highly depends on the stability of the tidal marsh itself. Not much is known
about the stability of a tidal marsh under dike breach conditions, which are
accompanied with flow velocities that can reach 4–5ms−1. In this study we tested
the vegetation response and erodibility of a mature tidal marsh, in-situ, under high
flow velocities ( > 0.5ms−1). Our results confirm that tidal marshes similar to the
one tested in this study are highly erosion resistant with low erodibility. More
research is necessary to confirm this for tidal marshes with different soil and
vegetation properties. For tidal marshes similar to what is tested thus far, erosion
under dike breach conditions is negligible and other erosion mechanisms such as
headcut erosion probably dominate the erosion process.@en

A field campaign was carried out at a sheltered sandy beach with the aim of gaining new insights into the driving processes behind sheltered beach morphodynamics. Detailed measurements of the local hydrodynamics, bed-level changes and sediment composition were collected at a man-made beach on the leeside of the barrier island Texel, bordering the Marsdiep basin that is part of the Dutch Wadden Sea. The dataset consists of (1) current, wave and turbidity measurements from a dense cross-shore array and a 3 km alongshore array; (2) sediment composition data from beach surface samples; (3) high-temporal-resolution RTK-GNSS beach profile measurements; (4) a pre-campaign spatially covering topobathy map; and (5) meteorological data. This paper outlines how these measurements were set up and how the data have been processed, stored and can be accessed. The novelty of this dataset lies in the detailed approach to resolve forcing conditions on a sheltered beach, where morphological evolution is governed by a subtle interplay between tidal and wind-driven currents, waves and bed composition, primarily due to the low-energy (near-threshold) forcing. The data are publicly available at 4TU Centre for Research Data at: https://doi.org/10.4121/19c5676c-9cea-49d0-b7a3-7c627e436541 (Van der Lugt et al., 2023).@en

Many sand spits are morphodynamically complex landforms, that are either analysed with complex and expensive computational models or at a conceptual level. Therefore, most case studies on spits in different environments are descriptive. A novel method based on the use of polar coordinates was devised to quantitatively analyse spit morphodynamics in a non-tidal, wind-dominated lake environment, using the Marker Wadden islands in Lake Markermeer, the Netherlands, as a case study. A high-resolution morphological data set allowed for the quantification of sedimentation processes around two spits, in two distinctive depth zones. Spit-platform growth is governed by alongshore currents that transport sediment over the spit-platform into deeper waters; the size of the spit-platform in turn affects the growth of the spit around the mean water level. Insight in this complex interplay of processes is crucial to understand spit behaviour in low-energy lake environments. At the Marker Wadden the submerged spit-platform grows during high energy wind events while the emerged spit part grows under mild to moderate energy conditions. With this new method we can quantitatively explore the role of different wave and flow conditions and predict spit growth direction in non-tidal, wind-dominated environments, beyond the level of conceptual descriptions.

@en

Low-energy, non-tidal lake beaches are known to be subject to longshore morphodynamics, but little is known about how they are driven by wind and wave-driven currents. Lake Markermeer is a shallow (∼4 m deep), wind-dominated lake, of approximately 700 km². A gradient in wind-induced water level set-up at the leeward shore induces a flow from the shallower to the deeper parts of the lake, thereby generating a large-scale, horizontal circulation. Flow measurements and results from a numerical Delft3D model of the lake show that these circulations impact the nearshore currents greatly, even more than wave-driven longshore currents for most wind conditions. From nearshore measurements at the first study site in lake Markermeer, we found a clear relation between longshore sediment transport capacity and the measured longshore volume flux. The model numerical can predict flow direction and magnitude for any wind condition. Using wind statistics, the net transport capacity for a short period or a long term mean can be predicted. The relation is confirmed for a second study site, which shows a distinct net transport capacity that could not be explained from wave-driven longshore flow alone. Concluding, large-scale lake circulations are of great significance for the morphological development of low-energy, non-tidal beaches in shallow, wind-driven water bodies. Knowledge of these circulations and their dependence on wind characteristics is a crucial factor to better understand and predict sediment losses of lake beaches.

@en

Intertidal flats are of great socio-economic and ecological importance in defending the coastal cities from flooding, providing resources for land reclamations and habits for wildlife. On the intertidal flats, milder profiles are usually featured with finer sediment. However, we find the opposite relationship between the alongshore variation in intertidal slope and sediment grain size on the intertidal flat along the Jiangsu Coast. With a conceptual figure of the hydrodynamics and shoreline evolution on this coast, we hypothesize that the unexpected pattern is caused by the alongshore gradient in hydrodynamic forcing. In order to test our hypothesis, we carry out a series of numerical model simulations in a highly schematized manner to investigate the real mechanism behind this unexpected pattern. Through the analysis, we find that only the southwards coarsening pattern is inconsistent with the shoreline evolution pattern. This inconsistency is not induced by alongshore hydrodynamic gradient, and can only be explained by different sediment provenances. We also find that the alongshore shoreline evolution pattern is not only determined by the alongshore gradient in hydrodynamic forcing, but also influenced by the alongshore variation in bed composition. In the erosion/sedimentation transition zone, the bed composition factor plays the major role.@en

Muddy coasts provide ecological habitats, supply food and form a natural coastal defence. Relative sea level rise, changing wave energy and human interventions will increase the pressure on muddy coastal zones. For sustainable coastal management it is key to obtain information on the geomorphology of and historical changes along muddy areas. So far, little is known about the distribution and behaviour of muddy coasts at a global scale. In this study we present a global scale assessment of the occurrence of muddy coasts and rates of coastline change therein. We combine publicly available satellite imagery and coastal geospatial datasets, to train an automated classification method to identify muddy coasts. We find that 14% of the world’s ice-free coastline is muddy, of which 60% is located in the tropics. Furthermore, the majority of the world’s muddy coasts are eroding at rates exceeding 1 m/yr over the last three decades.

@en

Coastal defences such as dikes are increasingly pressured by climate change. Increasing storm surge, extreme rainfall and periods of draught requires evermore strengthening of dikes to maintain flood risk standards. Conventional dike strengthening (i.e., heightening and/or widening) will be either structurally or financially unfeasible. Therefor, engineers are exploring other, more sustainable, methods to ensure future flood safety. A promising method is incorporating tidal marshes in the coastal defence system. Tidal marshes reduce dike loads by wave attenuation, increase bio diversity and ecology and under the right circumstances are able to grow with sea level rise. Moreover, in case of dike failure, resulting in a dike breach and inundation of the hinterland, tidal marshes have been shown to reduce breach erosion rates. This reduction positively affects flood risk. However, in order to quantitatively estimate the effect, dike breach models need to also model tidal marsh erosion. In this study we tested a mature tidal marsh, in-situ, in winter conditions under high flow velocities (up to 2.5 m/s) to measure the erosion and estimate erodibility. We measured little erosion, order millimeters after a cumulative 2-2.5 hours. Small-scale experiments, such as the Jet Erosion Test, showed high resistance to erosion (85-140 Pa) and large varying erodibility (6.5-45 cm3/N·s). By estimating the shear stresses acting on the soil during the experiment we compare the data with the small-scale results. The comparison gives insight in whether the small-scale experiment results can be accurately translated to full-scale erosion. Also, the experiment showed which (erosion) mechanisms are important for tidal marshes during a dike breach.@en

Changing (wind) climate might influence the magnitude, direction, and frequency of wave systems (Lobeto et al., 2021). However, in coastal engineering applications, generalized wave parameters are commonly used in climate change assessments with the risk of, for example, misrepresenting the nearshore transformation of wind-driven wave climates (Hegermiller et al., 2017). In consequence, these uncertainties in the nearshore (wind) climate will affect, amongst others, ship navigation, the implementation of marine renewable energy farms, the feasibility of coastal infrastructure and defences, or the efficiency of sandy coastal maintenance, and thus the decision-making of long-term, multidecadal coastal strategies (Rijksoverheid, 2013), especially when they are designed accounting for the Building with Nature concept (de Vriend et al., 2015). This study analyses the importance and application of considering multiple coexisting wave trains on the Dutch shoreface. @en

All around the world, deltas are among the most densely populated and heavily utilised regions, where crucial functions, such as freshwater availability and safety against flooding, strongly relate to the natural dynamics of the system. Therefore, a thorough understanding of the estuarine system is crucial, especially when developing nature-based solutions for safeguarding these essential functions for today’s society as well as future generations. To better understand the effect of different estuarine parameters on salt intrusion, an extensive sensitivity analysis has been executed based on an idealised estuary layout. The idealised estuary is parametrically designed using thirteen parameters that represent both boundary conditions and geometric features, such as river discharge and water depth. Subsequently, the Delft3D Flexible Mesh (DFM) model has been used to determine the salt intrusion, allowing the exploration of a wide range of estuary layouts. @en

Storm conditions can lead to excessive dune erosion with potential floods as a consequence. Barrier islands and low-lying countries protected by dunes are especially vulnerable to dune erosion. To properly assess the risks these areas face, a clear understanding of the physical processes during dune erosion is required. One of such processes is the effect of wave obliquity on sediment transport in the surf zone. Classic dune erosion models assume that dune erosion volumes decrease under oblique wave attack, because the time-averaged cross-shore undertow decreases in magnitude and with that offshore directed sediment transport decreases (Steetzel, 1993). More recent process-based erosion models predict an increase in erosion quantities, because the generated longshore currents increase surf zone sediment concentrations, and with that offshore directed sediment transport increases (Den Heijer, 2013). The main objective of this study is to analyse the effect of wave obliquity on dune erosion through a field experiment, by quantifying the effect of the decreasing undertow but increasing alongshore current on sediment concentrations in the surf zone. @en

Dune erosion during storm surges can lead to excessive damage to the dune system with devastating floods as a potential consequence. A risk assessment of areas protected by dunes can be facilitated by an understanding and description of the physical processes that take place. Field measurements, knowledge of underlying processes and numerical modelling have developed with time, which enabled a more comprehensive description and new predictive techniques. This review concerns dune erosion in the collision regime, and summarises relevant observations, describes underlying processes and explains existing models predicting dune erosion. Observations of dune erosion consist of field observations, laboratory experiments and manipulative field campaigns. The underlying physical processes that contribute to dune erosion are divided into processes that contribute to sediment transport due to hydrodynamic forcing, which occurs in the surf and swash zone, and sediment transport due to avalanching, which occurs in the swash zone, on the dune face and on the dune crest. The existing dune erosion models that are discussed here contain (empirical) equilibrium profile models and process-based models, which can both be a valuable tool for the risk assessment of storm surges. However, model uncertainties still remain, as specific processes are not yet fully understood and described. Examples are the influences of wave obliquity, sediment grain size, and vegetation on the dune face. By improving our knowledge through research and reducing these uncertainties, we can further improve our predictive models. This could eventually lead to more accurate predictions, more complete risk assessments, and sandy coastlines which are more resilient to excessive dune erosion and possible floods.@en

Projections of high rates of sea level rise have stimulated proposals for adaptation strategies with increasingly high nourishment volumes. Nourishment strategies involving higher sand volumes can be accomplished by increasing the volume of individual nourishments or by decreasing the time interval between successive nourishments. The optimal placement of the sediment volumes in the cross-shore and alongshore to attain our coastal management goals is still under debate. From a long term, large scale perspective only the added sediment volume may be considered, regardless of the placement. A widely accepted perception is that coastal profiles respond to nourishment by rapid equilibration to an equilibrium shape including the added sand volume. However, the timescale of the redistribution of the sediment may be slower than the desired spreading rate of the added sediment, causing sediment to accumulate at some parts of the profile, while leaving other elevations sediment starved. This research aims to examine decadal-scale coastal profile response to nourishment strategies upscaled with sea level rise (SLR) whereby potential nourishment strategy impacts for beach width (fluctuations), dune growth potential and momentary coastline are mapped. @en

Estuaries are among the most densely populated and heavily utilised regions in the world, where crucial functions – e.g., freshwater availability and water safety – strongly relate to the natural dynamics of the system. When developing nature-based solutions to safeguard these essential functions, a thorough understanding of estuarine dynamics is required. This study describes an elaborate sensitivity analysis on the salt intrusion length using an idealised estuary, which is parametrically designed using key estuary-scale parameters – e.g., river discharge and tidal flats – to cover a wide range of estuary classes. We were able to systematically investigate such a wide range of estuary classes due to the combination of (1) state-of-the-art hydrodynamic modelling software, (2) high performance computing, and (3) reduction and analysis techniques using machine learning. The results show that the extent of the estuarine salt intrusion length is largely determined by four estuarine features: (1) river discharge; (2) cross-sectional area (especially water depth); (3) tidal damping/amplification; and (4) tidal asymmetry. In general, the salt intrusion length shows clear correlations with (a combination of) estuary-scale parameters, which all put an upper limit on the salt intrusion length. These relations provide crucial insights for successful development of nature-based solutions to mitigate salt intrusion in estuarine environments.

@en

Sandy coasts form the interface between land and sea and their morphologies are highly dynamic. A combination of human and natural forcing results in morphologic changes affecting both nature values and coastal safety. Terrestrial laser scanning (TLS) is a technique enabling near-continuous monitoring of the changing morphology of a sandy beach-dune system with centimetre-order accuracy. In Kijkduin, The Netherlands, a laser scanner sampled one kilometre of coast at hourly intervals for about six months. This resulted in over 4,000 consecutive topographic scans of around one million points each, at decimetre-order point spacing. Analysis of the resulting dataset will offer new insights into the morphological behaviour of the beach-dune system at hourly to monthly time scales, ultimately increasing our fundamental scientific understanding of these complex geographic systems. It further provides the basis for developing novel algorithms to extract morphodynamic and geodetic information from this unique 4D spatiotemporal dataset. Finally, experiences from this TLS setup support the development of improved near-continuous 3D observation of both natural and anthropogenic scenes in general.

@en

The amount of suspended fines in the southern North Sea strongly depends on their exchange with the sandy seabed. This exchange is governed by resuspension of fines during storms, followed by burial in the week thereafter. Despite its importance for fine sediment dynamics, the burial of fines into a sandy seabed is currently not well understood. This paper presents a mechanistic conceptual model, explaining how the interaction of migrating small ripples and larger megaripples can bury fine sediment in a sandy seabed shortly after storms. The burial process consists of four phases forming a dynamic cycle. A storm stirs up the bed, remobilising fines, while forming megaripples. After the storm, fines can settle again depositing atop the sandy seabed. Interaction between bedforms of different scales is then crucial to bury fines 1–2 dm within the seabed. Megaripples formed during storms gradually adjust to calmer conditions in the waning of storms. During this adjustment period, fines are buried by current-induced ripples in the troughs of the former megaripples. Field measurements collected in 2017 corroborate this conceptual model, showing fines in distinct patches, both horizontally and vertically. Furthermore, fines are found up to 10–15 cm in the seabed shortly after storms. The data further reveal how fine sediment occurrences on and within the seabed vary strongly over multiple length scales. They both vary on the mega-scale (kilometres) and on the micro-scale (metres-centimetres). As the micro-scale is multiple orders of magnitude smaller than the scale on which hydro-morphological models operate, parameterisations are required to aggregate the effect of burial in numerical models.

@en

Tidal flats play an important role in the geomorphological and biological dynamics of coasts. Research on the morphological evolution of tidal flats constitutes one of the key research issues pertaining to the sustainability of coastal ecosystems and related coastal defense issues. In this work, a novel indicator, the surface tidal trail (STT), was extracted from a near infrared terrestrial laser scanner and studied. The results show that the area intensity and size of STTs decline yearly. Meanwhile, the position shift of the peak value on the STT curves presents a similar pattern of hydrodynamic force in response to the seawall, which has been studied in previous works. Although no direct correlation between the STT intensity and the deposition rate was found, the corresponding hydrodynamic force data were not available in this work. The change process of STTs still provides a possible speculation that hydrodynamic force and the softness of tidal surfaces are two main factors that form and influence STTs. For future research, establishing the direct quantitative relationships among hydrodynamic force, topography, and STTs on different temporal and spatial scales would help to better understand this novel indicator.

@en

Sandy nourishments can provide additional sediment to the coastal system to maintain its recreational or safety function under rising sea levels. These nourishments can be implemented at sandy beach systems, but can also be used to reinforce gray coastal infrastructure (e.g., dams, dikes, seawalls). The Hondsbossche Dunes project is a combined shoreface, beach, and dune nourishment of 35 million m3 sand. The nourishment was built to replace the flood protection function of an old sea-dike while creating additional space for nature and recreation. This paper presents the evolution of this newly created sandy beach system in the first 5 years after implementation based on bathymetric and topographic surveys, acquired every three to six months. A significant coastline curvature is created by the nourishment leading to erosion in the central 7 km bordered by zones with accretion. However, over the five-year period, net volume losses from the project area were less than 5% of the initial nourished sand volume. The man-made cross-shore beach profile rapidly mimics the characteristics of adjacent beaches. The slope of the surfzone is adjusted within two winters to a similar slope. The initially wide beaches (i.e., up to 225 m) are reduced to about 100 m-wide. Simultaneously, the dune volume has increased and the dune foot migrated seaward at the entire nourished site, regardless of whether the subaqueous profile gained or lost sediment. Our results show that the Hondsbossche Dunes nourishment, built with a natural slope and wide beach, created a positive sediment balance in the dune for a prolonged period after placement. As such, natural forces in the years after implementation provided a significant contribution to the growth in dune volume and related safety against flooding.@en

Nature-based strategies, such as wave attenuation by tidal marshes, are increasingly proposed as a complement to mitigate the risks of failure of engineered flood defense structures such as levees. However, recent analysis of historic coastal storms revealed smaller dike breach dimensions if there were natural, high tidal marshes in front of the dikes. Since tidal marshes naturally only experience weak flow velocities (~0-0.3 ms^-1 during normal spring tides), we lack direct observations on the stability of tidal marsh sediments and vegetation under extreme flow velocities (order of several ms^-1) as may occur when a dike behind a marsh breaches. As a first approximation, the stability of a tidal marsh sediment bed and winter-state vegetation under high flow velocities were tested in a flume. Marsh monoliths were excavated from Phragmites australis marshes in front of a dike along the Scheldt estuary (Dutch-Belgian border area) and installed in a 10 m long flume test section. Both sediment bed and vegetation responses were quantified over 6 experimental runs under high flow velocities up to 1.75 ms^-1 and water depth up to 0.35 m for 2 hours. These tests showed that even after a cumulative 12 hours exposure to high flow velocities, erosion was limited to as little as a few millimeters. Manual removal of the aboveground vegetation did not enhance the erosion either. Present findings may be related to the strongly consolidated, clay- and silt-rich sediment and P. australis root system in this experiment. During the flow exposure, the P. australis stems were strongly bent by the water flow, but the majority of all shoots recovered rapidly when the flow had stopped. Although present results may not be blindly extrapolated to all other marsh types, they do provide a strong first indication that marshes can remain stable under high flow conditions, and confirm the potential of well-developed tidal marshes as a valuable extra natural barrier reducing flood discharges towards the hinterland, following a dike breach. These outcomes promote the consideration to implement tidal marshes as part of the overall flood defense and to rethink dike strengthening in the future.

@en